Epson WF-R5690 User Manual page 322
Hide thumbs
Also See for WF-R5690:
- User manual (416 pages) ,
- Start here (4 pages) ,
- Hardware setup manual (19 pages)
Table of Contents
Advertisement
Code
Condition/solution
104
Reverse printing has failed due to a lack of available memory. Clear fonts and macros
from the product's memory by selecting Setup > System Administration > Clear
Internal Memory Data > Clear Font and Macro. You can also try reducing the size of
the print job.
106
Cannot print from the computer due to access control settings. Contact your network
administrator.
107
User authentication failed and the job has been canceled. Contact your network
administrator.
108
Confidential job data was deleted when the product was turned off.
109
The received fax was already deleted.
110
The job was printed 1-sided because the loaded paper does not support 2-sided printing.
111
Available memory is running low. Reduce the size of the print job.
201
The product's memory is full. You can send pages individually, or print received faxes and
delete them to free up memory space.
202
The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
203
The product cannot detect a dial tone.
Make sure the phone cable is connected correctly and the phone line works. If you
connected the product to a PBX (Private Branch Exchange) phone line or Terminal
Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the
Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the
product to drop the first digit of a fax number.)
204
The recipient's fax machine is busy. Wait a moment, then try again.
205
The recipient's fax machine does not answer. Wait a moment, then try again.
206
The phone cable is incorrectly connected to the product's LINE and EXT ports. Connect
the phone cable correctly.
207
The phone cable is not connected. Connect the phone cable.
208
The fax could not be sent to some of the specified recipients.
Print a fax log to check which recipients failed to receive the fax. If the Save Failure Data
setting is turned on, you can resend a fax from Job Monitor in the Status Menu.
322
- Quick Links:
- Using the Control Panel
Hide quick links:
Advertisement
Table of Contents
