Table of Contents
Advertisement
Available languages
Available languages
Sync Function
Settings for the synchronization with signals.
Item
To do
No Sync Action
Select the screen status when no signal is coming in.
Delay Time
Select the period until the screen status changes as selected in "No Sync Action" after signals
stop coming in.
Low Latency
Activates/deactivates the function to shorten the time taken to display the picture (low
latency function).
• If the picture is not displayed steadily while "On" is selected, select "Off."
• While "On" is selected, the displayed picture may become unstable when an operation
●
When setting "No Sync Action" to "Gray Back," the screen color changes to gray and the power consumption of the backlight is saved by half.
Selecting "Power Save" (power save mode) saves more power consumption by turning off the backlight.
No Operation Action
Setting of the function for turning the unit off (standby) automatically when no operations are made for
Off: Does not turn off automatically
On: Turns off automatically
●
When the function is turned On, a warning message will be displayed about 3 minutes before turning off automatically.
When you turn on the unit with the function turned On, a message notifying that the setting is turned on will be displayed for about 30
seconds.
using buttons on the front panel or the menu is performed, or when the signal format
changes.
Setting values: Off, On
Setting value
Off, Standby, Power Save
(power save mode)
,
Gray Back (gray screen)
30s, 5min, 15min
Off, On
more than 4 hours.
35
Advertisement
Table of Contents
