Table of Contents
Advertisement
Making adjustments and selections
It is recommended to adjust the focus after 30 minutes have elapsed projecting.
1)
Press the <FOCUS> button on the remote control to roughly adjust the focus of the projection light.
(x page 47)
2)
Set the [SETUP] menu → [PROJECTION METHOD] (x page 67) and [VERTICAL FLIP] (x page 67)
according to the installation condition.
f Refer to "Navigating through the menu" (x page 54) for the operation of the menu screen.
3)
Press the <LIGHTING/PROJECTOR> button on the remote control to switch the projection mode of
the projector to lighting mode or projector mode. (x page 46)
4)
When using the projector in the projector mode, press the <HDMI>, <MEMORY VIEWER>, <Miracast>,
<Panasonic APP>, or <SIGNAGE> button on the remote control to select the input to project.
(x page 46)
5)
Adjust the orientation of the main unit to adjust the projection position. (x page 35)
6)
Press the <ZOOM> button on the remote control to adjust the projection size. (x page 47)
7)
Press the <FOCUS> button on the remote control again to adjust the focus.
Note
f The initial setting screen is displayed when the projector is turned on for the first time after purchase or when [ALL USER DATA] in the
[SETUP] menu → [INITIALIZE] is executed. Refer to "When the initial setting screen is displayed" (x page 41).
Turning off the projector
r When using the optional Ceiling Kit
1)
Press the power <v/b> button.
f The [POWER OFF(STANDBY)] confirmation screen is displayed.
2)
Press qw on the remote control to select [OK], and press the <ENTER> button.
(Or press the power <v/b> button again.)
f The projection is finished.
3)
Wait for a few seconds until the power indicator <ON (G)/STANDBY (R)> lights in red.
4)
Turn off the power supply of the interior wiring if necessary.
44 - ENGLISH
Chapter 3 Basic Operations — Turning on/off the projector
6)
1)
3)
4)
2)
1) 7)
1)
1)
2)
Advertisement
Table of Contents
