Mitsubishi ECLIPSE 2011 User Manual

page of 494

/ 494
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Introduction

Thank you for buying a MITSUBISHI ECLIPSE/ECLIPSE

SPYDER.

We are confident you will enjoy your vehicle. It has been engi-

neered for optimum performance, durability and comfort. By

thoroughly reading this Owner's Manual, you will gain an

understanding of the many features that are included in the

ECLIPSE/ECLIPSE SPYDER. The Owner's Manual contains

descriptions and illustrations that will assist in the operation

and maintenance of your vehicle.

Your Authorized Mitsubishi Motors Dealer will be happy to

assist you with any further questions you may have regarding

the operation of your vehicle.

Please note that this manual applies to all ECLIPSE/ECLIPSE

SPYDER models and explains all features including options.

Some features explained in this manual may not be installed on

your vehicle.

Please leave this Owner's Manual in the vehicle at the time of

resale. The next owner will appreciate having access to the

information contained here.

This manual includes instructions for standard and optional

equipment available at the time of printing. Mitsubishi Motors

Corporation reserves the right to make changes in design and

specifications and to make additions or improvements in its

product without assuming any obligation to install these on

previously manufactured products.

Throughout this manual the words WARNING and CAUTION

appear.

N09200100790

These are reminders to be especially careful. Failure to follow the

instructions could result in personal injury or damage to your

vehicle.

WARNING

Indicates a strong possibility of severe personal injury or

death if instructions are not followed.

CAUTION

Points out hazards or unsafe practices that could cause minor

personal injury or damage to your vehicle.

You will see another important symbol:

NOTE Gives helpful information.

WARNING

Engine exhaust, some of its constituents, and certain vehicle

components contain or emit chemicals known to the State of

California to cause cancer and birth defects and reproduc-

tive harm. In addition, certain fluids contained in vehicles

and certain products of component wear contain or emit

chemicals known to the State of California to cause cancer

and birth defects or other reproductive harm.

This vehicle is manufactured by Mitsubishi Motors North America, Inc. in

I n f o r ma t i o n P r o v i d e d b y :

U.S.A. under license from Mitsubishi Motors Corporation.

Printed in U.S.A.

Table of Contents

Chapters

Table of Contents

Summary of Contents for Mitsubishi ECLIPSE 2011

Page 1 ©2010 Mitsubishi Motors Corporation Printed in U.S.A. This vehicle is manufactured by Mitsubishi Motors North America, Inc. in I n f o r ma t i o n P r o v i d e d b y : U.S.A. under license from Mitsubishi Motors Corporation.
Page 2: Table Of Contents
Table of contents Overview Quick index General information Seat and restraint systems Features and controls Driving safety Comfort controls For emergencies Vehicle care and maintenance Customer assistance/ Reporting Safety Defects Specifications I n f o r ma t i o n P r o v i d e d b y :...
Page 3 Overview Instruments and controls (Driver’s area) N00100201114 Combination headlights and Instrument cluster P.3-105 dimmer switch P.3-126 Turn signal lever P.3-130 Steering wheel audio remote control switch (if so equipped) P.5-65 Supplemental restraint system Wiper and washer - air bag (for driver’s seat) switch P.3-133 P.2-36 Horn switch P.3-137...
Page 4 Overview Instruments and controls (Instrument panel) N00100201127 Multi center display P.3-115 Front passenger seat belt warning Passenger’s air bag off indicator light P.2-19 P.2-43 Supplemental restraint system - air bag (for front passenger’s seat) P.2-36 Hazard warning flasher switch ® Hands-free Bluetooth P.3-131 cellular phone interface...
Page 5 Overview Instruments and controls (Floor console) N00100201273 Heated seat switch (if so equipped) Electric rear window defogger P.2-10 switch P.3-136 Gearshift or selector lever P.3-67, 3-72 Air conditioning P.5-5, 5-14 Parking brake lever P.3-54 Cup holder P.3-178 Floor console box P.3-176 Electric convertible top (ECLIPSE SPYDER) Operation indicator lamp Auxiliary Audio connector...
Page 6 Overview Interior N00100301056 ECLIPSE Except for vehicles with sunroof Vehicles with sunroof Dome light (Front)/Reading lights (if so Window lock switch P.3-28 equipped) P.3-172, 3-173, 7-50 Dome light (Front)/Reading lights P.3-171, 3-172, 7-50, 7-68 Sunroof switch P.3-28 Power door lock switch P.3-15 Inside rearview mirror P.3-56, 3-103 Inside rearview mirror P.3-56, 3-103...
Page 7 Overview Interior N00100301069 ECLIPSE Supplemental restraint system - curtain air bag P.2-52 Coat hooks (if so equipped) P.3-180 Dome light (Rear) P.3-174, 7-50, 7-68 Rear shelf panel P.3-178 Rear seat P.2-11 I n f o r ma t i o n P r o v i d e d b y :...
Page 8: Cargo Area
Overview Cargo area N00100500077 ECLIPSE Tools P.6-8 Cargo area light P.3-174, 7-50, 7-69 Luggage hooks Luggage hooks P.3-180 P.3-180 Tether anchors for child restraint Tether anchors for child restraint system P.2-28 system P.2-28 Spare tire P.6-11 Jack P.6-9 Inside rear hatch/trunk lid release P.3-18 I n f o r ma t i o n P r o v i d e d b y :...
Page 9 Overview Outside (Front) N00100601134 Sunroof (if so equipped) ECLIPSE Outside rearview mirrors P.3-28 Windshield wiper and washer P.3-133 P.3-58 Fuel tank filler door P.1-4 Engine compartment P.7-6 Engine hood P.7-4 Locking and unlocking P.3-13 Keyless entry system Front fog lights P.3-7 P.3-132, 7-48, 7-57 Except for vehicles with high intensity...
Page 10 Overview Outside (Rear) N00100601147 ECLIPSE Satellite radio antenna (if so equipped) P.5-75 Rear window wiper and Antenna P.5-74 Rear hatch P.3-16 washer P.3-135 High-mounted stop light Tire inflation pressure P.7-23 (vehicles with large rear Changing tires P.6-9 spoiler) P.7-49 Tire rotation P.7-26 High-mounted stop light Tire chains P.7-29 (except for vehicles with...
Page 11: Seat Belts P
Overview Interior N00100301072 ECLIPSE SPYDER Window lock switch P.3-28 Dome light (Front)/Reading lights P.3-172, 3-173, 7-50 Inside rearview mirror P.3-56, 3-103 Power door lock Sun visors P.3-167 switch P.3-15 Vanity mirror (if so equipped) P.3-168 Power window switch P.3-26 Seat belts P.2-13 Front seats P.2-4 Head restraints P.2-12 Supplemental restraint system - side air bag...
Page 12: Trunk Area
Overview Trunk area N00100400223 ECLIPSE SPYDER Tools P.6-8 Spare tire P.6-11 Jack P.6-9 Inside emergency trunk lid release P.3-20 I n f o r ma t i o n P r o v i d e d b y :...
Page 13 Overview Outside (Front) N00100601150 ECLIPSE SPYDER Windshield wiper and washer P.3-133 Outside rearview mirrors P.3-58 Engine compartment P.7-6 Fuel tank filler door P.1-4 Engine hood P.7-4 Locking and unlocking P.3-13 Keyless entry system P.3-7 Front fog lights P.3-132, 7-48, 7-57 Except for vehicles with high intensity Vehicles with high intensity discharge (HID) discharge (HID) type headlights...
Page 14 Overview Outside (Rear) N00100601033 ECLIPSE SPYDER Satellite radio antenna Antenna P.5-74 High-mounted stop light (if so equipped) P.5-75 P.7-49 Trunk lid button Tire inflation pressure P.7-23 P.3-16 Changing tires P.6-9 Trunk lid P.3-16 Tire rotation P.7-26 Tire chains P.7-29 Tire pressure monitoring sys- tem P.3-97 License plate light P.7-49, 7-66...
Page 15 I n f o r ma t i o n P r o v i d e d b y :...
Page 16 Avoid hard braking and high speeds, and contact an authorized Brake warning light Mitsubishi Motors dealer or a repair facility of your choice for assis- tance. I n f o r ma t i o n P r o v i d e d b y :...
Page 17 Anti-lock braking system warning light Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. It is not necessary to stop the vehicle immediately, but we recommend P.2-24,...
Page 18 Restart the engine and check to see if the indicator comes on again. If the indicator does not go out, or if it comes on again, have your vehicle inspected at an authorized Mitsubishi Motors dealer or a P.3-88 repair facility of your choice as soon as possible.
Page 19 Quick index If you hear this sound... N00200800664 Sound Do this Ref. page “Key reminder buzzer” A tone will sound if the driver’s door is opened while the ignition key is in the P.3-14 “LOCK” or “ACC” position. Remove the key to stop the tone. Constant tone when the driver’s door is “Headlight reminder buzzer”...
Page 20 The brake pads are worn down to the serviceable limit. P.3-81 brake pedal while driving. Have the brake pads replaced at an authorized Mitsubishi Motors dealer or a repair facility of your choice. “Seat belt reminder buzzer” When the ignition key is turned to the “ON” position, the tone will sound for about 6 seconds.
Page 21 The indicator and tone indicate a system fault. Have the vehi- ond). P.3-38 (approx. once per cle inspected by an authorized Mitsubishi Motors dealer. second). I n f o r ma t i o n P r o v i d e d b y :...
Page 22 Quick index If this problem occurs... N00200900678 Problem Do this Ref. Page Cannot turn the key. From “LOCK” to “ACC” Turn the key while jogging the steering wheel in either direction. From “ACC” to “LOCK” P.3-61, Vehicles with automatic transaxle: 3-63 Check the position of the selector lever.
Page 23 Quick index Problem Do this Ref. page The engine coolant tempera- ture gauge indicator is at the “H” (hot) position. Steam comes out of the engine compartment. The engine is overheated. P.6-6 Carefully stop the vehicle in a safe place. Move the gearshift lever or selector lever rhythmically between 1st and Reverse gears The vehicle is stuck in sand, (for vehicles with manual transaxle) or “Sports mode”...
Page 24 P.4-6 water. There may be a problem in the automatic transaxle. The automatic transaxle does Have the vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility not shift when accelerating of your choice. P.3-80 and/or the vehicle does not Shift the lever into 2nd gear of the sports mode when starting the vehicle.
Page 25 I n f o r ma t i o n P r o v i d e d b y :...
Page 26: General Information
Filling the fuel tank ......1- Modifications to and racing of your vehicle ..1- Mitsubishi Motors genuine parts ....1- California Perchlorate Materials Requirements. . .1-...
Page 27: Fuel Selection
Unleaded gasoline having an octane number of 87 Gasoline is highly flammable and explosive. You [(MON+RON)/2] or 91 RON may be used, but Mitsubishi could be burned, seriously injured or killed when Motors Corporation recommends that your vehicle be operated handling it.
Page 28: Reformulated Gasoline
If this happens, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance. I n f o r ma t i o n P r o v i d e d b y :...
Page 29: Filling The Fuel Tank
Be sure to use a genuine Mitsubishi handling it. When refueling your vehicle, always detergent additive. Using an unsuitable additive could turn the engine off and keep away from flames, make the engine malfunction.
Page 30 General information Fuel tank capacity 3. Open the fuel tank filler pipe by slowly turning the cap counterclockwise. 17.7 gal (67 L) Refueling 1. Before filling with fuel, stop the engine. 2. The fuel tank filler is located on the rear driver side of your vehicle.
Page 31 The indicator will go off after driving several times. If the CAUTION indicator does not go off, contact your authorized Mitsubishi Motors dealer or a repair facility of your To avoid fuel spillage and overfilling, do not “top- choice as soon as possible.
Page 32: Modifications To And Racing Of Your Vehicle
Modifications to and racing of your vehicle Installation of accessories N00301700023 N00301600136 This vehicle should not be modified with non-Mitsubishi CAUTION Motors genuine parts. Mitsubishi Motors designs and manufac- tures high quality vehicles with an emphasis on safety and Before any electrical or electronic accessories are durability.
Page 33: Modification/Alterations To The Electrical Or Fuel Systems
If the wires interfere with the vehicle body or always possible for an authorized Mitsubishi Motors dealer to improper installation methods are used (protective check whether the attachment or installation of non-Mitsubishi fuses not included, etc.), electronic devices may be...
Page 34: Interior
Also available from seat belt pretensioners, and button cell batteries, may contain your Mitsubishi Motors dealer are a wide variety of accessories perchlorate materials. to personalize your new vehicle. Each Mitsubishi vehicle has a Special handling may apply.
Page 35 I n f o r ma t i o n P r o v i d e d b y :...
Page 36: Seat And Restraint Systems
Seat and restraint systems Seats ........2- Seats and restraint systems.
Page 37: Seats
Seat and restraint systems Seats N00408400323 1 - Front seats 2 - Rear seat To adjust the seat forward or backward → P.2-5 Folding the seatbacks forward (ECLIPSE only) → P.2-11 To adjust the seatback → P.2-6 To adjust the seat height (Driver’s side only) → P.2-7 To adjust the lumbar support (Driver’s side only) →...
Page 38: Seats And Restraint Systems
Seat and restraint systems Seats and restraint systems Always check the following before you drive: That everyone in your vehicle is properly wearing their N00401600195 seat belt. Your vehicle has seat belts and other features that help protect That infants and small children are properly secured in you and your passengers in an accident.
Page 39: Front Seats
Seat and restraint systems Front seats WARNING N00401800201 Position the driver’ s seat as far back as possible while main- Do not attempt to adjust the seat while driving. This can cause loss of vehicle control and result in an taining a position that still enables you to fully apply the ped- accident.
Page 40 Seat and restraint systems To adjust the seat forward or backward CAUTION N00401900260 Make sure that the seat is adjusted by an adult. If it Manual seat is adjusted by a child, an unexpected accident might Pull the seat adjusting lever up and slide the seat forward or occur.
Page 41 Seat and restraint systems To adjust the seatback Power seat Push the switch to adjust the seat forward or backward to the N00402000167 To adjust the seatback, lean forward slightly, gently pull the desired position. Release the switch, and the seat will lock at seatback lock lever up, then lean backward to a comfortable that position.
Page 42 Seat and restraint systems To adjust the seat height (Driver’s side only) WARNING N00402100100 To reduce the risk of serious injury or death in the Manual seat event of an accident or sudden stop, all seatbacks Turn the dial to raise or lower the whole seat cushion. should be kept in the upright position while the vehi- cle is in motion.
Page 43 Seat and restraint systems Power seat Rear part of the seat cushion Operate the switch to raise or lower the rear part of the seat Front and/or rear parts of the seat cushion height can be cushion. adjusted. NOTE To prevent the battery from running down, operate the power seat with the engine running.
Page 44 Seat and restraint systems To adjust the lumbar support (Driver’s side Whole seat cushion Operate the center of the switch to raise or lower the whole seat only) cushion. N00402200097 A lumbar support is included in the seatback of the driver’s seat.
Page 45 Seat and restraint systems For access to the rear seat (Passenger’s side only) Heated seats (if so equipped) N00402400028 N00435600293 The heated seats can be operated when the ignition key is in the “ON” position. For rear seat passenger entry or exit, the front passenger seat and seatback can be moved forward by either pulling up the seat lock lever or depressing the lock release pedal behind the 1- Heater high (for quick heating)
Page 46: Rear Seat
Seat and restraint systems Rear seat CAUTION N00402500074 Switch off the seat heaters when not in use. Operate Folding the seatbacks forward (ECLIPSE only) the heaters at high for quick heating. After the seat has become warm, set the heater to low to keep it N00402900153 warm.
Page 47: Head Restraints
Seat and restraint systems Head restraints WARNING N00404300454 Do not allow anyone to ride in the cargo area while The front seats are equipped with padded head restraints (A) the vehicle is in motion. People who are not properly integrated with the seatbacks. These head restraints can reduce seated and restrained can be seriously injured or the risk of a whiplash injury if your vehicle is hit from the rear.
Page 48: Seat Belts
Seat and restraint systems Seat belts WARNING N00406000282 In order to minimize the risk of a neck injury due to Seat belts are installed in your vehicle to help reduce the risk of a rear impact, the driver and front passenger injury to the driver and passenger in the event of an accident.
Page 49 In the event of an accident, all seat belt assemblies, including retractors and attachment hardware, should be inspected by an authorized Mitsubishi Motors dealer to determine whether replacement is necessary. I n f o r ma t i o n P r o v i d e d b y :...
Page 50 Seat and restraint systems 1. Occupants should always sit back in their seats with their WARNING backs against the upright seatback. To reduce the risk of To reduce the risk of serious injury or death in the serious injury or death during deployment of the air bag, event of an accident or sudden stop, all seatbacks adjust the driver’s seat as far back as possible while main- should be kept in the upright position while the vehi-...
Page 51 Seat and restraint systems 2. Grasp the latch plate and slide it up the webbing so that it 3. Pull the seat belt out slowly while holding the latch plate. easily pulls across your body. Push the latch plate into the buckle until you hear a “click”.
Page 52 Seat and restraint systems NOTE 4. The lap part of the belt must always be worn low and snug With the exception of the seat belt for the driver, the seat across the hips. Pull up on the shoulder portion of the belt belts in all other seating positions are equipped with an to take up any slack in the lap belt.
Page 53: Driver's Seat Belt Reminder/Warning Light
Seat and restraint systems Driver’s seat belt reminder/warning light WARNING N00418400137 A tone and warning light are used to remind the driver to fasten In order to reduce the risk of serious injury or death in an accident, always wear your own seat belt. Do the seat belt.
Page 54: Front Passenger Seat Belt Warning Light
Seat and restraint systems Front passenger seat belt warning light Adjustable seat belt shoulder anchor (ECLIPSE only, front seats) N00418300093 The front passenger seat belt warning light is located above the N00406300230 central vents in the instrument panel. To move the anchor down, press the lock knob (A) and slide the anchor down to the desired position.
Page 55 Seat and restraint systems Seat belt guide (ECLIPSE SPYDER only, front WARNING seats) Always adjust the shoulder belt anchor so that the N00419300045 shoulder belt is positioned across the center of your Each front seat is fitted with a seat belt guide (A). shoulder without touching your neck.
Page 56: Seat Belt Extender
Seat and restraint systems Seat belt extender WARNING N00406700087 Make sure the part of the seat belt webbing you When your seat belt, even fully extended, is not long enough, a inserted into the seat belt guide is not twisted. seat belt extender must be obtained.
Page 57: Seat Belt Use During Pregnancy
Seat and restraint systems Seat belt use during pregnancy Seat belt pre-tensioner and force limiter systems N00406800075 Seat belts work for everyone, including pregnant women. Like N00417700319 all occupants, pregnant women are more likely to be seriously The driver’s and front passenger’s seats each have a seat belt injured or killed in an accident if they do not wear seat belts.
Page 58 2- Front impact sensors pre-tensioner system inspected by an authorized 3- Seat belt pre-tensioners Mitsubishi Motors dealer. 4- Seat belt buckle switches 5- Air bag control unit The air bag control unit monitors the readiness of the electronic parts of the system whenever the ignition switch is in the “ON”...
Page 59: Child Restraints
Seat and restraint systems Child restraints SRS warning light N00407100600 N00408700049 When transporting infants or small children in your vehicle, an This warning light tells you if there is a problem involving the appropriate child restraint system must always be used. This is SRS air bags and the pre-tensioner seat belts.
Page 60 Seat and restraint systems Children who weigh more than 40 pounds (18 kg) or who WARNING are more than 40 inches (100 cm) tall, regardless of age, Never hold an infant or child in your arms or on should use a suitable child seat or a booster seat (including your lap when riding in this vehicle, even when you a booster cushion) in the rear seat until the vehicle’s are wearing your seat belt.
Page 61 Seat and restraint systems WARNING WARNING Your vehicle is also equipped with a front passenger FRONT-FACING CHILD RESTRAINTS should air bag. always be used in the rear seat whenever possible. If Never put REAR-FACING CHILD RESTRAINTS one must be used in the front passenger seat, move or INFANT RESTRAINTS in the front passenger the seat to the most rearward position and make seat.
Page 62 Seat and restraint systems NOTE WARNING Before purchasing a child restraint system, try installing it It is important to use an approved rear-facing infant in the rear seat to make sure there is a good fit. Because of restraint until the infant is one year old (unless the the location of the seat belt buckles and the shape of the infant outgrows the seat sooner).
Page 63 Seat and restraint systems Installing a child restraint system using the Tether anchor locations (ECLIPSE only) LATCH (Lower Anchors and Tethers for chil- N00418900086 Your vehicle has 2 attachment points on the floor of the cargo dren) system area. These are for securing a child restraint system tether strap N00418800043 to each of the 2 rear seating positions in your vehicle.
Page 64 Seat and restraint systems Examples of child restraint systems compatible with the Using the LATCH system LATCH system N00419100203 N00419000101 1. Push the anchor connectors (A) on the child restraint sys- tem into the slits (B) in accordance with the instructions provided by the child restraint system manufacturer.
Page 65 Seat and restraint systems NOTE In an ECLIPSE, install a tether strap in accordance with steps 2 to In order to secure a child restraint systems compatible 4 shown hereafter. with the LATCH system, use the lower anchor points in 2.
Page 66 Seat and restraint systems Installing a child restraint system using the seat 4. Latch the tether strap hook (G) of the child restraint sys- tem to the tether anchor (H) and tighten the tether strap so belt (With emergency/automatic locking mecha- it is securely fastened.
Page 67 Seat and restraint systems Installation: 3. To activate the ALR child restraint installation function, slowly pull the shoulder part of the belt all the way out of 1. Place the child restraint system in a rear seating position. the retractor until it stops. Then let the belt feed back into 2.
Page 68 Seat and restraint systems 5. After confirming that the belt is locked, grab the shoulder 6. Open the rear hatch. Remove the rear shelf panel. Refer to part of the belt near the buckle and pull up to remove any “Rear shelf panel”...
Page 69 Seat and restraint systems 8. Latch the tether strap hook (B) of the child restraint sys- 9. Before putting your child in the restraint, push and pull tem to the tether anchor (C) and tighten the tether strap so the restraint in all directions to be sure it is firmly secured. it is securely fastened.
Page 70: Maintenance And Inspection Of Seat Belts
Children can die from heat stroke if left or trapped authorized Mitsubishi Motors dealer. Failure to inside the vehicle, especially on hot days. have an authorized Mitsubishi Motors dealer per- form the work could reduce the effectiveness of the Keep your vehicle locked and the trunk (ECLIPSE belts and could result in a serious injury or death in SPYDER) closed when not in use.
Page 71: Supplemental Restraint System (Srs) - Air Bag
Seat and restraint systems Supplemental Restraint System (SRS) - air The SRS curtain air bags (ECLIPSE only) are designed to sup- plement the seat belts and provide the driver and front passen- ger with protection against head injuries in certain moderate to N00407700606 severe side impact collisions.
Page 72 Seat and restraint systems WARNING WARNING IT IS VERY IMPORTANT TO BE PROPERLY Air bags inflate very quickly and with great force. SEATED. Do not sit on the edge of the seat or lean your head or chest close to the steering wheel or the instrument •...
Page 73 Seat and restraint systems WARNING WARNING Infants and small children should never ride unre- NEVER REAR-FACING CHILD strained, or lean against the instrument panel. They RESTRAINTS or INFANT RESTRAINTS in the should never ride held in your arms or on your lap. front passenger seat.
Page 74 Seat and restraint systems How the Supplemental Restraint System works WARNING N00407800317 The SRS includes the following components: FRONT-FACING CHILD RESTRAINTS should be used in the rear seat whenever possible. If they must be used in the front passenger seat, move the seat to the most rearward position and make sure the child stays in the child restraint, properly restrained.
Page 75 Seat and restraint systems When the impact sensors detect a sufficient front or side impact to deploy the air bag(s), the appropriate air bag(s) will be deployed. When air bags deploy, some smoke is released accompanied by a loud noise. The smoke is not harmful, but do not intentionally inhale the smoke as it may cause temporary irritation to people with respiratory problems.
Page 76: Event Data Recording
Refer to “SRS warning light” on page 2-44. Diagnostic code(s) WARNING If the SRS warning light comes on, have the vehicle inspected by an authorized Mitsubishi Motors dealer as soon as possible. Please observe the following instructions to ensure that the driver’s seat position sensor can operate correctly.
Page 77 • Do not place the floor mat on the seat rails. authorized Mitsubishi Motors dealer as soon as pos- • Do not expose the sensors to liquids or vapors. sible: • Do not subject the sensors to shock.
Page 78 N00418100219 If the vehicle is involved in a severe impact, have the The passenger air bag off indicator is located in the instrument sensors inspected by an authorized Mitsubishi panel. Motors dealer as soon as possible. The indicator normally comes on when the ignition switch is turned to the “ON”...
Page 79: Srs Warning Light
WARNING If any of the following conditions occur, you should immediately have the air bag system in your vehicle inspected by an authorized Mitsubishi Motors dealer as soon as possible: • The passenger’s air bag off indicator comes on when an adult is sitting on the front passenger seat.
Page 80 The front passenger’s air bag is properly and you should immediately have it contained in the instrument panel above the glove compart- inspected by an authorized Mitsubishi Motors ment. The driver’s air bag and the front passenger’s air bag are dealer: designed to deploy at the same time.
Page 81 Seat and restraint systems Deployment of front air bags N00408000459 The front air bags ARE DESIGNED TO DEPLOY when… Head-on collision with a solid wall at Moderate to severe frontal impact within speeds of approx. 15 mph (25 km/h) or the shaded area between the arrows higher The front air bags are designed to deploy when the vehicle suf-...
Page 82 Seat and restraint systems The front air bags MAY NOT DEPLOY when … Collision with a utility pole, tree or other narrow objects In certain types of front collisions, the front air bags may not deploy, even if the deformation of the body seems to be large, because the vehicle’s body structure is designed to absorb the impact and deform in order to help protect the occupants.
Page 83 Seat and restraint systems The front air bags ARE NOT DESIGNED TO Rear end collision to your vehicle DEPLOY when … The front air bags are not designed to deploy in situations where they cannot provide protection to the occupants. Some typical situations are shown in the illustrations.
Page 84 Seat and restraint systems The front air bags MAY DEPLOY when … Collision with an elevated median/island or curb The front air bags may deploy if the underside of the vehicle suffers a moderate to severe impact (undercarriage impact). Some typical situations are shown in the illustrations. Because the front air bags may deploy in certain types of unex- pected impacts, as shown in the illustrations, and these unex- pected impacts can move you out of position, it is important to...
Page 85 They must promptly be replaced and the entire air bag system must be inspected by an authorized Mitsubishi Motors dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 86 Seat and restraint systems Side air bag system ECLIPSE N00408100290 The side air bags (A) are contained in the driver and front pas- senger seatbacks. [For ECLIPSE] The side air bag is designed to inflate only on the side of the vehicle that is impacted, even with no passenger in the front seat.
Page 87 Seat and restraint systems Curtain air bag system (ECLIPSE only) A label is attached to the seatbacks in vehicles with side air bags. N00419200028 The curtain air bags are contained in the front and rear pillars and roof side rail. The curtain air bag is designed to inflate only on the side of the vehicle that is impacted, even with no passen- ger in the front seat.
Page 88 Seat and restraint systems WARNING WARNING The side air bag and curtain air bag can cause seri- In order to reduce the risk of injury from a deploy- ous injury or death to anyone too close to the air bag ing side air bag, do not allow any rear seat passen- when it deploys.
Page 89 Work done on or in the vicinity of the side air bag and curtain air bag system components should be done only by an authorized Mitsubishi Motors dealer. Improper work methods can cause acciden- tal side air bag and curtain air bag deployment, or render a side air bag and curtain air bag inoperable.
Page 90 Seat and restraint systems Deployment of side air bag and curtain air bag The side air bag and curtain air bag MAY NOT DEPLOY when … N00408200392 In certain types of side collisions, the side air bag and curtain The side air bag and curtain air bag ARE DESIGNED air bag may not deploy, even if the deformation of the body TO DEPLOY when …...
Page 91 Seat and restraint systems Side impact in an area away from the passenger compartment Oblique side impact Motorcycle or other similar small vehicle collision with the Vehicle rolls onto its side or roof side of vehicle Collision with a utility pole, tree or other narrow object I n f o r ma t i o n P r o v i d e d b y : 2-56...
Page 92 SRS performance and may lead to injury. If your vehicle has received any damage, you should have the SRS inspected by an authorized Mitsubishi Rear end collision Motors dealer to make sure it is in proper working order.
Page 93 If you decide to junk or scrap your vehicle, we urge you to Mitsubishi Motor Sales of Canada, Inc. first take it to an authorized Mitsubishi Motors dealer so Customer Relations Department that the SRS can be made safe for disposal.
Page 94: Warning Labels
Seat and restraint systems Warning labels N00408600282 Occupant restraint warning labels for the SRS are located in the vehicle as shown in the illustration. * - Located in the passenger’s side as well. I n f o r ma t i o n P r o v i d e d b y : 2-59...
Page 95 I n f o r ma t i o n P r o v i d e d b y :...
Page 96: Features And Controls
Features and controls Break-in recommendations ....3- Cruise control ......3- 90 Keys .
Page 97: Break-In Recommendations
Features and controls Break-in recommendations Keys N00508700226 N00508800445 Advanced automobile manufacturing techniques permit you to Two keys are provided. operate your new vehicle without requiring a long break-in The keys fit all locks. Keep one in a safe place as a spare key. period of low-speed driving.
Page 98: Electronic Immobilizer (Anti-Theft Starting System)
The purpose of the system is to a key from your authorized Mitsubishi Motors dealer if immobilize the vehicle if an invalid start is attempted. A valid the original keys are lost.
Page 99 “ACC” or “LOCK” position. Then try to start the engine again. If the engine does not start, contact an authorized Mitsubishi Motors dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 100: Additional Keys
Registering the ID code can be done by your authorized cially available remote starting systems may result in Mitsubishi Motors dealer. Or it can be done by yourself (except vehicle starting problems and a loss of security protection. for vehicles sold in Canada).
Page 101 “LOCK” position to the moment when the blank immobilizer key (specially cut for your vehicle at your Mitsubishi Motors dealer) is turned to the “ON” position • more than 30 seconds elapse after the immobilizer indi- cator starts blinking 5.
Page 102: General Information
Features and controls General information Keyless entry system Your electronic immobilizer operates on a radio frequency sub- N00509000851 Press the remote control transmitter buttons to lock or unlock ject to Federal Communications Commission (FCC) Rules the doors and to open the rear hatch (ECLIPSE) or trunk lid (For vehicles sold in U.S.A.) and Industry Canada Rules (For (ECLIPSE SPYDER).
Page 103 Features and controls To lock To open the rear hatch (ECLIPSE) or trunk lid (ECLIPSE SPYDER) Press the LOCK button (1) to lock all the doors and the rear hatch or trunk lid. Press the rear hatch or trunk button (3) twice within 5 seconds If the dome light switch is in the door position, the dome light and the rear hatch or trunk lid will be opened.
Page 104 Features and controls Horn deactivation/reactivation To deactivate/reactivate the answerback function for lock- ing of the doors and rear hatch or trunk lid, take the fol- The answerback function can be set in the following three lowing steps: ways. Each time the answerback function is set, a tone will sound to 1.
Page 105 • The indicator light (5) is dim or does not come on. If you lose your remote control transmitter, please contact an authorized Mitsubishi Motors dealer for a replacement. If you wish to obtain an additional remote control trans- mitter, please contact an authorized Mitsubishi Motors dealer.
Page 106 3. Remove the old battery. NOTE Be sure to perform the procedure with the Mitsubishi mark facing you. If the Mitsubishi mark is not facing you when you open the remote control transmitter case, the buttons may come out. I n f o r ma t i o n P r o v i d e d b y :...
Page 107 You may purchase a replacement battery at an electric appliance store. Your authorized Mitsubishi Motors dealer can replace the battery for you if you prefer. I n f o r ma t i o n P r o v i d e d b y :...
Page 108: Door Locks
Features and controls Door locks To lock or unlock the door with the key (driver’s door only) N00509200202 Turn the key toward the front of the vehicle to lock the door. WARNING After checking that the door is locked, turn the key back to the center and remove it.
Page 109 Features and controls To lock or unlock the door from the inside To lock the door without using the key Move the lock knob to the lock position to lock the door. 1. Move the inside lock knob to the locked position. All doors should be kept locked while driving.
Page 110: Power Door Locks
1 sec- ond. The window glass should then return to its original posi- tion. If it does not, have the vehicle inspected by a Mitsubishi Motors dealer or a repair facility of your choice.
Page 111: Rear Hatch (Eclipse)
Features and controls Rear hatch (ECLIPSE)/Trunk lid To open (ECLIPSE SPYDER) N00554100041 1. Press the rear hatch or trunk button (A) to open the rear N00510000037 hatch or trunk lid. The rear hatch or trunk lid will pop up slightly. Lift it from this point. WARNING It is dangerous to drive with the rear hatch or trunk ECLIPSE...
Page 112 Features and controls To close 2. Slip your hand into the gap (B) under the rear hatch or trunk, and raise the rear hatch or trunk lid to open it. N00554200039 Pull the rear hatch grip (A) or trunk lid downward as illustrated and let it go before the rear hatch or trunk lid closes com- ECLIPSE ECLIPSE SPYDER...
Page 113: Inside Rear Hatch/Trunk Lid Release
Features and controls Inside rear hatch/trunk lid release 1. Open the lid (A) inside of the cargo area. N00509800149 ECLIPSE The inside rear hatch release provides a way to open the rear hatch in the case of a discharged battery. The rear hatch release lever (see illustration) is mounted in the cargo area.
Page 114 Features and controls The trunk lid key cylinder (see illustration) is located near 3. Push out on the rear hatch to open it. the sub woofer. CAUTION Always keep the release lever lid on rear hatch closed when driving so that your cargo cannot acci- dentally bump the lever and open the rear hatch.
Page 115: Inside Emergency Trunk Lid Release (Eclipse Spyder)
Features and controls Inside emergency trunk lid release 3. Insert the key and turn it clockwise. (ECLIPSE SPYDER) N00509800110 The emergency trunk lid release provides a way to open the trunk lid from inside the trunk. It was developed to help pre- vent death and serious injuries, to children who might become locked inside a vehicle trunk.
Page 116 Features and controls You and your family should familiarize yourselves with the To open the trunk from the inside, pull the handle in the direc- location and operation of the emergency trunk lid release han- tion of the arrow on the handle. Push up on the trunk lid to dle.
Page 117: Theft-Alarm System
Features and controls Theft-alarm system Armed stage N00510300069 N00510200068 Park the vehicle and stop the engine. Arm the system as The theft-alarm system is designed to provide protection from described below. unauthorized entry into the vehicle. This system is operated in 1.
Page 118 Features and controls After completion of the steps above, the theft-alarm indicator NOTE (A) will illuminate for approximately 20 seconds and keeps The system will be armed even if the engine hood is open, blinking on and off, indicating that the system is armed. but when the system is set, be sure that the engine hood is locked.
Page 119 Features and controls Alarm stage 2. The horn will sound intermittently for 3 minutes. N00510400060 The alarm will be activated if any of the following occur while Horn sounds! the vehicle is parked and the system is armed. Headlights blink on and off! 1.
Page 120: Disarmed Stage
Features and controls Disarmed stage Testing the theft-alarm system N00510500061 N00510600059 The system will be disarmed when either of the following steps Use the following procedure to test the system: are taken: 1. Lower the driver’s window. 1. All doors and the rear hatch or trunk lid are unlocked by 2.
Page 121: Power Windows
Features and controls Power windows NOTE Depending on the position of the door window, the door N00510800338 window may briefly stop then continue moving before reaching the fully closed position. Never try to operate the main switch and sub switch in dif- ferent directions at the same time.
Page 122: Main Switch
Features and controls Main switch Sub switch The main switch located on the driver’s door can be used to operate all the windows. The windows will move while the switch is pressed and stop when the switch is released. 1- Close 2- Open A sub switch can be used for its own passenger side window, unless the driver’s window lock switch is activated.
Page 123: Sunroof (Eclipse Only, If So Equipped)
Features and controls Lock switch Sunroof (ECLIPSE only, if so equipped) N00549000101 N00511000571 When this switch is in the lock mode, the main switch for pas- The sunroof can be opened and closed with the ignition key in senger’s side window and the sub switch cannot be used to the “ON”...
Page 124 Features and controls To close Sunshade The sunroof closes while the switch (3) is pressed. The sunshade can be opened or closed manually while the sunroof is closed. To tilt up When the sunroof is opened, the sunshade will also open auto- When the switch (2) is pressed, the rear edge of sunroof raises matically.
Page 125 If nothing is trapped, have the sunroof checked at an authorized Mitsubishi Motors dealer. Be careful when tilting up the sunroof if a ski carrier or a roof carrier is installed.
Page 126: Electric Convertible Top (Eclipse Spyder)
Features and controls Electric convertible top (ECLIPSE SPY- WARNING DER) Before operating the electric convertible top, inform other vehicle occupants that you are going to cause N00511100048 The electric convertible top can be opened and closed using the the top to move and have them exercise caution. dash mounted control switches.
Page 127 Damage to the top may result. inspected by an authorized Mitsubishi Motors dealer. Before opening or closing the top, make sure there are no obstructions above the vehicle. For opening and closing of the top, there must be upward clearance of approximately 6.6 feet (2 m) as measured from the ground.
Page 128 Features and controls Top switches If the switches are continuously pushed one after the other, a protection circuit may operate, making the electric N00505100030 The top can be opened and closed using the switches. The top convertible top temporarily inoperable. In this event, the moves only while a switch is being pushed.
Page 129 Features and controls 5. Push the left and right release buttons (A) to unlock the 6. Pull the latch handles (B) toward you until they lock in latch handles (B) and cause them to slightly rise. position. NOTE Make sure the latch handles (B) are securely locked in place.
Page 130 Features and controls 7. When you push the OPEN switch, a tone will sound and the top will start to operate. Keep pressing the OPEN switch until the top is fully open. Refer to “Top switches” on page 3-33. NOTE When the top reaches the fully open position, a tone sounds once and the operation indicator lamp goes off to show that the operation is complete.
Page 131 Features and controls To close the top WARNING N00505300045 1. When you push the CLOSE switch, a tone will sound and To avoid injury, keep hands and head away from the the top will start to operate. Keep pressing the CLOSE top while it is operating.
Page 132 Features and controls WARNING To avoid injury, keep hands and head away from the top while it is operating. To prevent uncontrolled movement of the top, always keep the vehicle engine running when oper- ating the top. NOTE During operation of the top, if the switch is released before the top has fully closed or retracted, the top will stop moving and the operation indicator lamp will flash slowly (approximately one flash per second).
Page 133 If the operation indicator lamp does not go off when a period of 10 minutes or longer has elapsed, have the vehicle inspected by an authorized Mitsubishi Motors dealer. NOTE If you lock the driver’s-side latch handle (B) while listen- ing to the audio system, an audible beep will sound and the audio system’s sound equalization will change to set-...
Page 134 Features and controls Wind deflector Installing the wind deflector (if so equipped) 1. Open half of the bottom frame (A) and half of the top N00505800024 The wind deflector reduces turbulent airflow inside the vehicle frame (B) of the wind deflector as shown by the arrows. for greater comfort when driving with the electric convertible top open.
Page 135 Features and controls 2. While pushing the slide (C) in the direction of the arrow, 3. Move the locking pin (D) to the position (2). install the top and bottom frames, then release the slide (C). Make sure both of the frames are securely engaged. 1- Stowed position 2- Installation position 3- Locked position...
Page 136 Features and controls 4. From inside the vehicle, insert the two retainer pegs (E) 5. Align the locking pins (D) with the holes (G) in the vehi- all the way into mountings provided (F). cle. Slide the locking pins (D) toward the outside and insert them in the holes to retain the wind deflector.
Page 137 Features and controls NOTE 6. Raise the top frame to the full upright position as illus- When you insert the locking pins (D) into the holes (G), trated. they may be stiff. If this happens, adjust each locking pin (D) to a length that enables secure retention of the wind deflector.
Page 138 Features and controls Removing the wind deflector 2. Slide the locking pins (D) inward to remove them from Trying to remove the wind deflector improperly will cause the holes (G) in the vehicle. damage or destruction. NOTE Follow the removal procedure exactly to avoid damage or destruction of the wind deflector.
Page 139 Features and controls 4. Slide the slide (C) toward the middle to unlock the bottom 5. Move the locking pin (D) to the position (1). frame (A) and the top frame (B). 1- Stowed position 2- Installation position 3- Locked position I n f o r ma t i o n P r o v i d e d b y : 3-44...
Page 140 (neither openable nor closable) by means of switch operation. After closing the top by hand, be sure to have the vehicle inspected by an authorized Mitsubishi Motors dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 141 Features and controls To close the top by manually 8. Remove the emergency tool (B) that is mounted in the rear seat behind the woofer cover. N00505700036 1. Without obstructing traffic, stop the vehicle on a level, firm surface where you can work safely. 2.
Page 142 Features and controls 9. Insert the stamped end of the emergency tool stamped 10. Slowly move the emergency tool in the direction of the with a part number into the specified location (C). arrow to unlock the tonneau panel. I n f o r ma t i o n P r o v i d e d b y : 3-47...
Page 143 Features and controls 11. Step out of the vehicle. Open the tonneau panel. Insert the 12. Step into the vehicle. Firmly grasp the top and slowly non-stamped end of the emergency tool into the specified raise it. location in the tonneau hinge (D) to hold the tonneau panel in place.
Page 144 Features and controls 13. Slowly close the top until it touches the top edge of the 14. With the top closed, return the latch handles (E) until they windshield. lock into position. Return the sun visors to their original positions. CAUTION WARNING Be careful not to trap your hands and fingers when...
Page 145 Features and controls 15. Step out of the vehicle. Remove the strap (F) that retains 16. Open the cover (G) on the passenger-seat side of the space the top. in which the top was stowed. I n f o r ma t i o n P r o v i d e d b y : 3-50...
Page 146 Features and controls 17. While holding the rear window, turn the handle of the 18. While retaining the tonneau panel and the rear glass, valve (H) counterclockwise to release the pressure in the remove the emergency tool from the specified insertion valve.
Page 147 Features and controls 19. Step into the vehicle. Insert the stamped end of the emer- 20. Close the rear window. gency tool into the specified location (C). Slowly move the emergency tool in the direction of the arrow to lock the tonneau panel.
Page 148 NOTE When the work is complete, have the vehicle inspected by an authorized Mitsubishi Motors dealer as soon as possi- ble. I n f o r ma t i o n P r o v i d e d b y :...
Page 149: Parking Brake
Features and controls Parking brake To release N00511400168 To park the vehicle, first bring it to a complete stop, fully engage the parking brake, and then move the gearshift lever to 1st (on a uphill) or “R” (Reverse) (on a downhill) position, for vehicles with a manual transaxle or set the selector lever to “P”...
Page 150: Steering Wheel Tilt Lock Lever
Features and controls Steering wheel tilt lock lever WARNING N00511500130 To adjust the steering wheel height, release the tilt lock lever After adjusting, make sure the lock lever is secured in the locked (1) position. while holding the steering wheel by hand, and raise or lower Do not attempt to adjust the steering wheel while the steering wheel to the desired height.
Page 151: Inside Rearview Mirror
Features and controls Inside rearview mirror Type 1 N00511600232 Adjust the inside rearview mirror only after making any seat adjustments so as to have a clear view to the rear of the vehicle. WARNING Do not attempt to adjust the inside rearview mirror while driving.
Page 152 Features and controls To reduce the glare Adjust the inside mirror to maximize the view through the rear window. Type 1 To adjust the vertical mirror position The day/night knob (A) at the bottom of the mirror can be used It is possible to move the mirror up and down to adjust its posi- to adjust the mirror to reduce the glare from the headlights of tion.
Page 153: Outside Rearview Mirrors
Features and controls Outside rearview mirrors Type 2 When the headlights of the vehicles behind you are very bright, N00512200150 the reflection factor of the rearview mirror is automatically Adjust the outside rearview mirrors only after making any seat changed to reduce the glare. adjustments so you have a clear view to the rear of the vehicle.
Page 154 Features and controls To adjust the mirror position To fold the mirror The outside rearview mirrors can be adjusted when the ignition The outside mirror can be folded in toward the side window to key is in the “ON” or “ACC” position. prevent damage when parking in tight locations.
Page 155: Ignition Switch
Features and controls Heated mirror Ignition switch (if so equipped) N00549300146 N00512400631 When the rear window defogger switch is pressed, the outside rearview mirrors are defogged or defrosted. Current will flow Manual transaxle Automatic transaxle through the heater element inside the mirrors, thus clearing away frost or condensation.
Page 156 Features and controls START To remove the key Engages the starter. After the engine starts, release the key and N00550900070 For vehicles with a manual transaxle, when removing the key, it will return automatically to the “ON” position. push the key in at the “ACC” position and keep it depressed NOTE until it is turned to the “LOCK”...
Page 157 Features and controls For vehicles with an automatic transaxle, when removing the CAUTION key, first set the selector lever to the “P” (PARK) position, and then turn the key to the “LOCK” position and remove it. Do not remove the ignition key from the ignition switch while driving.
Page 158: Steering Wheel Lock
Features and controls Steering wheel lock NOTE If the front wheels are turned, the anti-theft lock may N00512500108 sometimes make it difficult to turn the key from “LOCK” position to “ACC” position. Firmly turn the steering wheel to the left or to the right as you turn the key. To lock Remove the key at the “LOCK”...
Page 159: Starting
Features and controls Starting CAUTION N00512600633 Release the ignition key as soon as the engine starts. Tips for starting Otherwise, the starter motor will be damaged. Do not operate the starter motor continuously for longer than 15 seconds as this could run the battery down or Starting the engine damage the starter motor.
Page 160 Features and controls Normal conditions At extremely cold ambient temperature To start your vehicle: If the engine won’t start, press the accelerator pedal about half- Make sure all occupants are properly seated with seat belts fas- way down while cranking the engine. Release the accelerator tened.
Page 161 5 to 6 seconds. Release the ignition key if the engine starts. Repeat as necessary if the engine fails to start, or contact your local Mitsubishi Motors dealer or a repair facility of your choice for assistance.
Page 162: Manual Transaxle
Features and controls Manual transaxle CAUTION N00512700025 The shift pattern below is shown on the gearshift lever. Press Do not rest your foot on the clutch pedal because this will cause premature clutch wear or damage. the clutch pedal all the way down while shifting gears. Do not coast in the “N”...
Page 163 CAUTION If the pull-ring will not return from the pulled-up position, have the vehicle inspected at an authorized Mitsubishi Motors dealer or at a repair facility of your choice. CAUTION Do not pull up the pull-ring (A) when moving the gearshift lever to any position other than the “R”...
Page 164 Features and controls Proper shift points Vehicles equipped with 6-speed manual transaxle N00537400023 Always use care to change the gear with the vehicle speed Upshift speeds matched to the engine speed. Proper shifting will improve fuel Shift point Acceleration Cruise economy and prolong engine life.
Page 165 Features and controls Downshifting At high altitude locations, upshift as listed below. N00513000096 Vehicles equipped with 5-speed manual transaxle It is recommended that you downshift to a lower gear when needed to maintain the desired speed, according to the table. Shift point Upshift speeds Avoid downshifting at too high a speed.
Page 166: Automatic Transaxle
Features and controls Driving precautions Automatic transaxle N00513100101 N00513200102 The table below shows the maximum recommended driv- Designed for the most efficient control and equipped with self- ing speed for in each gear. Do not drive near or at these adapting capabilities, the electronically controlled transaxle speeds for prolonged periods of time.
Page 167: Selector Lever Operation
Features and controls NOTE During the break-in period or immediately after recon- The transaxle has 4 forward (4-speed automatic transaxle) or 5 necting the battery, your vehicle may not shift smoothly. forward (5-speed automatic transaxle) gears and 1 reverse gear. This does not indicate a problem in the transaxle.
Page 168 Features and controls In the main gate, the selector lever has 4 positions, and is equipped with a lock button (C) to prevent inadvertent selec- tion of the wrong gear. The lock button must be pushed while the brake pedal is depressed to move the selector lever.
Page 169 Features and controls Selector lever position indicator WARNING N00513900327 Always depress the brake pedal when shifting the When the ignition key is turned to the “ON” position, the cur- selector lever into a gear from the “N” (NEUTRAL) rently position of the selector lever is indicated by the indicator position.
Page 170 Have your vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. I n f o r ma t i o n P r o v i d e d b y :...
Page 171 Features and controls Selector lever positions (Main gate) “N” NEUTRAL At this position, the transaxle is disengaged. It is the same as N00514200183 the neutral position on a manual transaxle and should be used “P” PARK when the vehicle is not moving for an extended length of time This position locks the transaxle to prevent the vehicle from during driving, such as in a traffic jam.
Page 172: Sports Mode
Features and controls Sports mode “D” DRIVE N00514400169 This position is used for most city and highway driving. Engine Whether the vehicle is stationary or in motion, sports mode is shifting and braking are done automatically as needed, depend- selected by pushing the selector lever from the “D” position ing on road conditions.
Page 173 Features and controls When pulling away from a standstill on a slippery road, CAUTION push the selector lever forward to the + (SHIFT UP) posi- tion. This causes the transaxle to select 2nd gear, which is Upward shifts do not take place automatically in sports mode.
Page 174 Features and controls Operation of the automatic transaxle Passing acceleration N00514900047 N00514500186 To gain extra acceleration in “D” (DRIVE) position (when CAUTION passing another vehicle) push the accelerator to the floor. The automatic transaxle will automatically downshift. Before selecting a gear with the engine running and the vehicle stationary, fully depress the brake pedal NOTE to prevent the vehicle from creeping.
Page 175: Service Brake
WARNING ing in the transaxle, causing a safety device to activate. Have your vehicle checked at an authorized Mitsubishi Motors Do not leave any objects near the brake pedal or let dealer or a repair facility of your choice as soon as possible.
Page 176: Power Brakes
If you hear this sound, have the brake pads replaced at an Your brakes are designed to operate at full capacity, even if the authorized Mitsubishi Motors dealer or a repair facility of your power assist is lost. choice.
Page 177: Anti-Lock Braking System
Features and controls Anti-lock braking system CAUTION N00517900224 The anti-lock braking system helps prevent the wheels from The anti-lock braking system cannot prevent acci- dents. It is your responsibility to take safety precau- locking up when braking. This helps you keep control of your tions and to drive carefully.
Page 178 Only the ordinary braking system is function- ing. If this happens, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and have the system checked as soon as possible. CAUTION...
Page 179 Features and controls NOTE Front After your vehicle is driven a short distance after starting the engine, you will hear a whining sound and the sound of a motor operating coming from the engine compart- ment. These are the normal sounds the anti-lock braking system makes when performing a self-check.
Page 180: Active Stability Control (Asc)
Features and controls Active stability control (ASC) NOTE A whining sound may be heard from the engine compart- N00559100088 The active stability control (ASC) takes overall control of the ment in the following situations. The sound is associated with the ASC self-check operations. It does not indicate a anti-lock braking system, traction control function and skid malfunction.
Page 181: Skid Control Function
Features and controls Skid control function ASC OFF switch N00546800036 N00559400052 The skid control function is designed to help the driver main- The ASC is automatically activated when the ignition key is tain control of the vehicle on slippery roads or during rapid turned to the “ON”...
Page 182 Features and controls NOTE Vehicles with headlight leveling Using the ASC OFF switch turns off both the skid control function and the traction control function. Type 1 Type 2 When moving out of mud, sand or fresh snow, pressing the accelerator pedal may not allow the engine speed to increase.
Page 183 If the indicator stays on or does not illuminate when the igni- pens, drive slower. tion key is turned to the “ON” position, have the vehicle inspected by an authorized Mitsubishi Motors dealer or a repair NOTE facility of your choice as soon as possible.
Page 184 Features and controls CAUTION CAUTION If the vehicle is towed with the ignition key in the [If the indicator blinks] “ON” position and only the front wheels or only the • If the temperature of the braking system increases rear wheels raised off the ground, the ASC may excessively, due to continuous brake control on a operate, resulting in an accident.
Page 185: Power Steering System
25 mph (40 km/h). effort to steer and that there is much more “free play” in the steering wheel. If this happens, take your vehicle to an autho- rized Mitsubishi Motors dealer or a repair facility of your choice. WARNING...
Page 186: Cruise Control Indicator
Features and controls Cruise control indicator CAUTION N00550100186 Cruise control is not recommended when driving This indicator comes on when cruise control is activated by conditions will not allow you to stay at the same operation of the cruise control main switch. speed, such as in heavy traffic or on roads that are winding, icy, snow-covered, wet, or slippery, or on a steep downhill.
Page 187 Features and controls To activate 2. Pull the lever (B) down while driving at the desired speed. N00518400170 1. Momentarily push in the main switch (A) at the end of the cruise control lever. NOTE If the main switch is on when the ignition key is turned off, cruise control will be on automatically the next time you start the engine.
Page 188 Features and controls To increase the set speed Accelerator pedal Press the accelerator pedal to reach your desired speed. Pull the N00518500256 There are 2 ways to increase the set speed. cruise control lever down for a moment, then release it. Cruise control lever Pull the cruise control lever up and hold it while driving at the set speed, and you will increase gradually.
Page 189 Features and controls To decrease the set speed Brake pedal Press the brake pedal (which disengages the cruise control), N00518600198 There are 2 ways to reduce the set speed. then pull the cruise control lever down momentarily to set a new desired cruise speed.
Page 190: To Accelerate For Passing
Features and controls To accelerate for passing To deactivate N00518700072 N00518800464 Press the accelerator pedal as you would normally. When you The cruise control can be turned off as follows: release the pedal, the cruise control will return to your set Push the main switch (A) at the end of the lever.
Page 191 Features and controls To resume the set speed When your speed slows to about 25 mph (40 km/h) or less. N00518900191 If the speed memory has not been erased, resume the previ- When the active stability control starts operating. ously set speed by pulling the cruise control lever up while Refer to “Active stability control (ASC)”...
Page 192: Tire Pressure Monitoring System
When the compact spare tire is used, the tire pres- sure monitoring system will not work properly. See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. I n f o r ma t i o n P r o v i d e d b y :...
Page 193 Mitsubishi monitoring system is not working properly. Have Motors dealer. the system inspected by an authorized Mitsubishi In such situations, a malfunctioning of the system Motors dealer. may be preventing the monitoring of the tire pres- In such situations, a malfunctioning of the system sure.
Page 194 Features and controls Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure tell- tale.
Page 195 Once adjustments have been made, the warning light will Mitsubishi Motors dealer. If the tire repair is not done by go off after a few minutes of driving. an authorized Mitsubishi Motors dealer, it is not covered by your warranty.
Page 196 Have tire and wheel replacement performed by The tire inflation pressure sensors’ battery is exhausted. an authorized Mitsubishi Motors dealer to avoid the risk of Wheels other than Mitsubishi Motors genuine wheels are damaging the tire inflation pressure sensors. If the wheel being used.
Page 197: Rear-View Camera (If So Equipped)
Features and controls General information Rear-view camera (if so equipped) N00533000092 N00546200043 Your tire pressure monitoring system operates on a radio fre- When the gearshift lever (for vehicles with manual transaxle) quency subject to Federal Communications Commission or the selector lever (for vehicles with automatic transaxle) is (FCC) Rules (For vehicles sold in U.S.A.) and Industry Canada in the “R”...
Page 198 Features and controls Location of rear-view camera Rear-view camera display The rear-view camera (A) is in the rear bumper. The rear-view camera image appears on the left portion of the rear-view mirror. CAUTION CAUTION If the camera lens gets dirty, a clear image cannot be obtained.
Page 199 Features and controls NOTE Mirror image is displayed on the rear-view camera dis- play. Monitor brightness is adjusted automatically by sensors. In the event the monitor is continuously used for more than 5 minutes, the monitor will automatically turn off. Under certain circumstances, it may become difficult to see an image on the display, even when the system is functioning correctly.
Page 200: Instrument Cluster
Features and controls Instrument cluster N00519000186 1- Speedometer 2- Tachometer 3- Fuel gauge 4- Light dimmer/Trip odometer control 5- Odometer/Trip odometer 6- Engine coolant temperature gauge I n f o r ma t i o n P r o v i d e d b y : 3-105...
Page 201 Features and controls Speedometer Type 2 N00519100086 The speedometer indicates the vehicle’s speed in miles per hour (mph) and kilometers per hour (km/h). Type 1 I n f o r ma t i o n P r o v i d e d b y : 3-106...
Page 202 Features and controls Tachometer Odometer/Trip odometer N00519200159 The tachometer shows engine revolutions per minute. This N00519500282 When the ignition switch is in the “ON” position, an “ODO” or allows the driver to determine the most efficient gear range and “TRIP” indicator is displayed. engine speed combinations.
Page 203 Features and controls Every time the reset button (1) is pressed lightly (less than one ODO-Odometer second), the indicators are changed. The odometer shows the total distance the vehicle has traveled. TRIP-Trip odometer Type 1 The trip odometer shows the distance traveled since the last time it was reset.
Page 204: Fuel Gauge
Features and controls Fuel gauge Fuel tank filler door mark The arrow (A) indicates that the fuel tank filler door is located N00519600225 This gauge shows the amount of fuel in the fuel tank when the on the left side of the vehicle (Refer to “Filling the fuel tank” ignition key is turned to the “ON”...
Page 205 Features and controls Engine coolant temperature gauge Light dimmer control (meter illumination con- trol) N00519700112 This gauge shows the engine coolant temperature. If the tem- N00552700030 perature is low when the ignition key is turned to the “ON” The rheostat can be adjusted while the headlights or tail lights position, the indicator will remain at the “C”...
Page 206: Indicator And Warning Light Package
Features and controls Indicator and warning light package N00519800807 Type 1 Type 2 13- Driver’s seat belt reminder/warning light 1- ASC OFF indicator → P.3-88 → P.2-18 2- ASC indicator → P.3-88 14- Selector lever position indicator (if so equipped) 3- Anti-lock braking system warning light →...
Page 207: Indicator
Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 208 Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 209: Charging System Warning Light
If this light comes on when the engine oil level is not low, have your vehicle checked at an authorized If the warning light stays on after the engine has Mitsubishi Motors dealer or a repair facility of your started, the battery charging system may be mal- choice.
Page 210: Multi Center Display
Features and controls Door-ajar warning light and buzzer Multi center display N00520900231 N00522100080 This light comes on when any door or rear hatch (ECLIPSE) is When the ignition key is in the “ACC” or “ON” position, the open or not completely closed. digital clock, the outside temperature (if so equipped) and the When the vehicle is moving at more than 5 mph (8 km/h) and electronic compass (if so equipped) are displayed in the multi...
Page 211 Features and controls Controls and display N00533100051 Type 1 Type 2 1- Electronic compass (type 1 only) → P.3-117 This display shows the compass direction of the vehicle. 2- Digital clock → P.3-124 3- Outside temperature (type 1 only) → P.3-124 4- Audio This display shows the audio condition.
Page 212 Features and controls Electronic compass (type 1 only) The direction of the vehicle is indicated by the symbols shown below. N00522400070 The electronic compass (A) shows the direction of the vehicle by the 8 direction using the earth’s magnetic field. Direction Symbol Direction...
Page 213 Features and controls Compass variance To adjust for compass variance Under certain circumstances, as during a long distance cross- N00554000011 1. Find your current geographic location and the correct cor- country trip, it will be necessary to adjust for compass vari- responding zone number on the zone map.
Page 214 Features and controls 2. When the ignition key is in the “ON” position, simulta- 3. With the electronic compass in its compass setting mode, neously press the “H” button and “M” button. Release the press the “M” button to cause the display (A) to show the “H”...
Page 215 Features and controls 4. Press the “M” button until the correct zone number 5. When the zone number adjustment has been completed, appears in the display. press the “H” button. The display will return to its previous display. NOTE Every time the “M” button is pressed, the zone number changes as follows: 01 →...
Page 216: Compass Calibration
Features and controls Compass calibration 1. When the ignition key is in the “ON” position, simulta- neously press the “H” button and “M” button. Release the N00553000014 This compass is self-calibrating, which means it automatically “H” button and “M” button within 10 seconds, and the makes corrections against magnetization of its components electronic compass will switch to its compass setting when the vehicle is running.
Page 217 Features and controls 2. With the electronic compass in its compass setting mode, 3. Drive the vehicle slowly through one or more 360° turns press the “H” button to cause the electronic compass to until the calibration has been completed in either direction switch to its compass calibration mode.
Page 218 (A) will show “EE”. bration procedure in an open space that is completely free Please have your vehicle inspected at an authorized Mitsubishi of rail lines, tall buildings, and high-voltage power lines. Motors dealer or a repair facility of your choice.
Page 219: Digital Clock
Features and controls Digital clock Outside temperature (type 1 only) N00553100015 N00522300053 The time (A) is shown in the center of the display. This value (A) shows the outside temperature of the vehicle. Adjusting the time Set the time by pressing the various buttons as described below.
Page 220 Features and controls If the outside temperature drops below approximately 37 °F Change of the outside temperature unit (3 °C), the outside temperature figure changes to “ICE” and the N00553400018 When the ignition key is in the “ACC” or “ON” position, “ICE”, “OUTSIDE TEMP”, and unit indications flash for pressing the “H”...
Page 221: Combination Headlights And Dimmer Switch
Features and controls Combination headlights and dimmer switch [When the engine is started and the parking brake is released] N00522500521 The daytime running lights come on. Headlights Rotate the switch to operate the lights. Headlights illuminate dimly Headlights illuminate, tail, front and rear side- marker lights, license plate Headlights illuminate dimly and Parking, tail, front and rear side-marker lights, license plate and instru-...
Page 222 When the light is switched on, the heat will dry out the fog. However, if water col- lects inside the light, have it checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Light auto-cutout function (headlights and other...
Page 223: Dimmer (High/Low Beam Change)
Features and controls Dimmer (high/low beam change) When you want to keep the lights on: If the light switch is turned to the “ ” or “ ” position again N00549900168 To change the headlights from high beam to low beam and vice after the engine is turned off, the 3 minute auto-cutout function versa, turn the light switch to the “...
Page 224: Headlight Levelling Switch (If So Equipped)
Features and controls Headlight flasher Headlight levelling switch (if so equipped) N00550000156 N00537100046 You can flash the high beams by pulling the lever gently The direction of the headlight beam (the direction which the toward you (2). The lights will go back to normal when you let light shines in) alters according to the number of people and go.
Page 225: Turn Signal Lever
Features and controls Turn signal lever NOTE Start adjusting when the knob is at the “0” position (when N00522600287 the beam is at its highest). When changing lanes, or to making a gradual turn, hold the Keep the knob in the “0” position except when using the lever in the “lane change”...
Page 226: Hazard Warning Flasher Switch
Have the vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice. If you press the flasher switch, the front and rear turn signals will flash intermittently, and so will the hazard warning lights.
Page 227: Front Fog Light Switch
Features and controls Front fog light switch Type 2 N00522800380 The front fog lights illuminate only when the headlights are on low beam. Press the switch to illuminate. Press the switch again to turn the lights off. The indicator in the instrument cluster will illuminate while the front fog lights are on.
Page 228: Wiper And Washer Switch
Features and controls Wiper and washer switch To adjust intermittent intervals With the lever in the “INT” (speed-sensitive) position, the N00523000422 intermittent intervals can be adjusted by turning the knob (A). Windshield wipers The windshield wipers wipe when the wiper lever is moved as Type 1 Type 2 shown in the illustration and the ignition key is in the “ON”...
Page 229: Windshield Washer
Features and controls Windshield washer Misting function Move the lever in the direction of the arrow and release, and N00504600096 To turn on the windshield washer, pull the lever toward you the wipers will operate once. with the ignition key in either the “ON” or “ACC” position. Use this function when you are driving in mist or drizzle.
Page 230 Features and controls Rear window wiper and washer (ECLIPSE only) NOTE To ensure a clear rearward view, the wiper performs a N00523200264 The rear window wiper and washer can be operated when the number of continuous operations either when the switch is ignition key is in the “ON”...
Page 231: Electric Rear Window Defogger Switch
Replace the wiper blades when they are worn. Use the proper size replacement blades. If you have questions, ask your authorized Mitsubishi Motors dealer. After about 17 minutes of operation, the system will shut off automatically.
Page 232: Horn Switch
Features and controls Horn switch CAUTION N00523800143 The rear window defogger is not designed to melt To honk the horn, press around the “ ” mark on the steering snow. Remove any snow manually before using the wheel. rear window defogger. Use the rear window defogger only after the engine has started and is running.
Page 233: Hands-Free Bluetooth ® Cellular Phone Interface System With Voice Recognition (If So Equipped)
Features and controls ® Hands-free Bluetooth cellular phone WARNING interface system with voice recognition ® Although the Bluetooth HFP allows you to make hands-free calls, if you choose to use the cellular (if so equipped) phone while driving, you must not allow that usage N00506400069 to distract you in the safe operation of your vehicle.
Page 234: Instrument Panel Control Switch
Features and controls Instrument panel control switch PHONE button Press the PHONE button (1) to answer an incoming call. N00547000019 When another call is received during a call, press the PHONE button to put the first caller on hold and talk to the new caller.
Page 235 Features and controls Voice recognition function NOTE When you press the SPEECH button to enter voice recog- N00506600090 ® nition mode with a cellular phone paired to the system, The Bluetooth HFP is equipped with a voice recognition current information on the cellular phone, such as function.
Page 236 Features and controls Speaker enrollment function Change the language using the “Language” command 1. Press the SPEECH button. N00528900107 ® The Bluetooth HFP can use the speaker enrollment function 2. Say “Setup.” to create a voice model for one person per language. 3.
Page 237 Features and controls Speaker enrollment NOTE If you do not start the speaker enrollment process within 3 N00529000033 It takes a few minutes to complete the speaker enrolment pro- minutes of pressing the SPEECH button, the speaker cess. enrollment function will time out. To ensure the best results, run through the process while in the The voice guide will say “Speaker Enrollment has timed driver’s seat, in an environment that is as quiet as possible...
Page 238 Features and controls 8. When all enrollment commands have been read out, the 4. When enrollment is “enabled,” the voice model is on; voice guide will say “Speaker Enrollment is complete.” when enrollment is “disabled,” the voice model is off. Say The system will then end the speaker enrollment process the command that fits your needs.
Page 239: Help Function
Features and controls Help function 1. Press the SPEECH button. 2. Say “Setup.” N00506700033 ® The Bluetooth HFP is equipped with a Help function. 3. Say “Confirmation prompts.” If you say “Help” when the system is waiting for a voice com- 4.
Page 240 3. Say “Passcode.” the voice input mode and then check with an authorized 4. The voice guide will say “Passcode is disabled. Would Mitsubishi Motors dealer. you like to enable it?” Answer “Yes.” Disabling the passcode Answer “No” to cancel the setting of the passcode and return to the main menu.
Page 241 Features and controls Pairing a cellular phone ® Use the following procedure to pair a Bluetooth compatible ® N00507100122 cellular phone to the Bluetooth HFP. ® ® To use the Bluetooth HFP, you need to pair a Bluetooth 1. Stop your vehicle in a safe area, put the gearshift lever in ®...
Page 242 Features and controls ® 7. After the voice guide says “Please say a 4-digit pairing 9. When the system finds a Bluetooth compatible cellular code,” say a 4-digit code. The 4-digit code will be regis- phone, the voice guide will say “Please say the name of tered as a pairing code for the phone.
Page 243 5. After the voice guide says “<phone tag> selected,” the If you are having difficulty pairing the phone, assistance system will reconnect to the cellular phone. Wait a can be obtained by calling Mitsubishi hands free con- moment for the process to complete. sumer support line 1-888-702-4100.
Page 244: Cellular Phones
Features and controls Having the system tell you a list of the registered Deleting a phone cellular phones N00507400053 ® Use the following procedure to delete a paired Bluetooth N00507300052 You can use the following procedure to hear a list of the cellu- ®...
Page 245 Features and controls NOTE 7. When the phone deletion process is completed, the voice In the case of English, the system will recognize both guide will say “Deleted.” The system will then beep and “zero” and “oh (Letter “o”) for the number “0.” Refer to the voice recognition mode will be exited.
Page 246 Features and controls Redialing 5. After the voice guide says “Calling <voice tag> at <loca- ® N00507800015 tion>,” the Bluetooth HFP will make the call. You can redial the last number called, based on the history of When the confirmation function is on, the system will dialed calls in the paired cellular phone.
Page 247 Features and controls Switching between hands-free mode and private Phonebook function mode N00508300020 ® The Bluetooth HFP has its own phonebook separate from the N00508100031 ® phonebook on the cellular phone. The Bluetooth HFP can switch between Hands-free mode This phonebook is used when making calls with the voice rec- (Hands-free calls) and private mode (calls using cellular ognition function.
Page 248 Features and controls New entry 3. Say the telephone number to register it. N00508400050 NOTE You can register a new entry in the phonebook by saying “New In the case of English, the system will recognize both entry” on the phonebook main menu. You can register up to a “zero”...
Page 249 Features and controls Edit 3. After the voice guide says “Number Please,” say the tele- phone number to register it. N00508500035 You can edit information in the phonebook by saying “Edit” on If a telephone number has been registered for the selected the phonebook main menu.
Page 250 Features and controls Having the system tell you a list of the phonebook Deleting a registered number entries N00511700057 You can delete a telephone number in the phonebook by saying N00508600052 “Delete” on the phonebook main menu. You can hear a list of the names registered in the phonebook by saying “List names”...
Page 251 Features and controls General information 4. When the deletion of the telephone number is completed, the voice guide will say “<voice tag> <location> deleted” N00511900046 MODEL: MMC FCC ID: CB2MBLUEC07 IC: 279B- and then the system will return to the main menu. MBLUEC07 NOTE ®...
Page 252 Features and controls Voice Command Tree N00512000086 I n f o r ma t i o n P r o v i d e d b y : 3-157...
Page 253 Features and controls Voice Command Tree - Phonebook N00512100045 I n f o r ma t i o n P r o v i d e d b y : 3-158...
Page 254 Features and controls Voice Command Tree - Setup N00512800039 I n f o r ma t i o n P r o v i d e d b y : 3-159...
Page 255 Features and controls Commands and Alternatives Lan- Alternative Command Primary Command N00513300073 guage Commands Lan- Alternative English Pair Command Primary Command guage Commands PAIR Spanish Emparejar English Setup French Jumeler SETUP Spanish Configuración English Delete A Phone Delete French Configurer Eliminar Un Telé- DELETE A Spanish...
Page 256 Features and controls Lan- Alternative Lan- Alternative Command Primary Command Command Primary Command guage Commands guage Commands English Add Location English Edit Agregar {Una} EDIT Spanish Editar Spanish Ubicación French Modifier LOCATION Ajouter {Un} English Call This Number Call French Emplacement CALL THIS Llamar A Este...
Page 257 Features and controls Lan- Alternative Lan- Alternative Command Primary Command Command Primary Command guage Commands guage Commands English Home English HOME Spanish Casa En Su Casa Spanish Todos French Maison À La Maison French Tous English Work English Cancel WORK Spanish Trabajo En Su Trabajo...
Page 258 Features and controls Lan- Alternative Lan- Alternative Command Primary Command Command Primary Command guage Commands guage Commands English English Spanish Spanish Seis French French English Zero Oh (letter “O” ) English Seven ZERO Spanish Cero SEVEN Spanish Siete French Zéro O (lettre «o») French Sept...
Page 259 Features and controls Lan- Alternative Lan- Alternative Command Primary Command Command Primary Command guage Commands guage Commands English English Phonebook List English Spoken Names Spanish Español PHONE- Language BOOK Agenda - Listar French Français Spanish LIST Nombres Phonebook New NAMES English Répertoire Liste Entry...
Page 260 Features and controls Lan- Alternative Lan- Alternative Command Primary Command Command Primary Command guage Commands guage Commands Setup Pairing English Passcode English Setup Pairing Options PASSCODE Spanish Contraseña Configuración French SETUP Spanish Opciones De Empa- PAIRING English Setup Passcode rejamiento OPTIONS SETUP Configuración Con-...
Page 261 Features and controls Lan- Alternative Phrase # English Spanish French Command Primary Command guage Commands 7 Continue Continuar Continuer English Join Calls 8 Help Ayude Aide JOIN Spanish Unir Llamadas CALLS French Intégrer L’appel English English ENGLISH Spanish Inglés French Anglais l’anglais English...
Page 262: Sun Visors
Features and controls Sun visors To block out additional side glare, swing the sun visor side- ways and slide it backward (if so equipped). N00524600236 Fold the sun visor downward (1) to reduce front glare while driving. To reduce side glare, turn the visor to the side (2). I n f o r ma t i o n P r o v i d e d b y : 3-167...
Page 263: Vanity Mirror (If So Equipped)
Features and controls Vanity mirror (if so equipped) Type 2 N00524700194 The vanity mirrors are located on the back of the sun visors. Opening the lid (A) of the vanity mirror will automatically turn on the mirror light (B). CAUTION If the lid of the lighted vanity mirror is kept open for prolonged periods of time, the battery may be dis- charged.
Page 264: Power Outlet
Features and controls Power outlet Type 2 N00525000530 Power outlets are located in front of the floor console (Type 1) and inside of the floor console box (Type 2). The accessory can be operated when the ignition key is in the “ON”...
Page 265: Interior Lights
Features and controls Interior lights ECLIPSE SPYDER N00525300517 ECLIPSE 1- Dome light (Front)/Reading lights-Type 2 → P.3-172 1- Dome light (Rear) → P.3-174 2- Dome light (Front)/Reading lights-Type 1 (if so equipped) → P.3-171 Dome light (Front)/Reading lights-Type 2 (if so equipped) →...
Page 266 Features and controls Dome light (Front)/Reading lights-Type1 (if so equipped) N00525800147 Dome light (Front) The dome light can be turned on by sliding the dome light switch. 1 (DOOR) - The dome light comes on when any door or rear hatch is opened.
Page 267 Features and controls Dome light (Front)/reading lights-Type 2 Reading lights (if so equipped) N00553800038 Push the reading light switch (A) to turn on the light. This light N00525800150 produces a spot beam for convenient use as a map light. Dome light (Front) The dome light can be turned on by pushing the dome light Push the reading light switch again to turn the light off.
Page 268 Features and controls Reading lights (DOOR) - The dome light comes on when any door or rear N00553800083 hatch is opened. When all the doors (including the Push the reading light switch (B) to turn on the light. This light rear hatch) are closed, the dome light is dimmed produces a spot beam for convenient use as a map light.
Page 269 Features and controls Dome light (Rear) (ECLIPSE only) NOTE If the ignition key is removed with the doors and N00525400417 The dome light can be turned on by sliding the dome light the rear hatch closed, the dome light comes on for switch.
Page 270: Glove Compartment
Features and controls Interior light auto-cutout function (dome light Glove compartment and other lights) N00526500268 Type 1 N00526300396 If any of the interior lights are left on with the ignition switch To open, pull the lever (A). in the “LOCK” position, the lights go out automatically after about 30 minutes.
Page 271: Floor Console Box
Features and controls Type 2 Floor console box 1. To lock. N00526600184 The floor console box is located under the arm rest. 2. To unlock. To open the console box, lift the lever (A) and raise the arm 3. To open, pull the lever (A). rest (B).
Page 272: Coin Holder
Features and controls Coin holder Notepad holder/Pen holder N00552800015 N00552900016 The coin holders (A) are located inside the floor console box. The notepad holder (A) and pen holder (B) are located on the back of the arm rest. I n f o r ma t i o n P r o v i d e d b y : 3-177...
Page 273: Cup Holder
Features and controls Cup holder Rear shelf panel (ECLIPSE only) N00527300188 N00528200083 The cup holder is located the middle of the floor console. The rear shelf panel is provided for covering the cargo area and The cup holder is designed for holding cups or drink-cans to protect its contents from direct sunlight.
Page 274 Features and controls NOTE 2. Unsnap by lifting the rear shelf panel pivoting points (B). When closing the rear hatch, make sure no luggage touches the rear shelf panel. If you close the rear hatch with the rear shelf panel pressing against luggage, the rear shelf panel could break.
Page 275: Coat Hooks (Eclipse Only, If So Equipped)
Features and controls Coat hooks (ECLIPSE only, if so equipped) Luggage hooks (ECLIPSE only) N00553600023 N00528500233 There are two hooks on the rear pillar for use in hanging There are four hooks on the side of the trunk for use in securing clothes.
Page 276: Driving Safety
Driving safety Fuel economy......4- Driving, alcohol and drugs....4- Vehicle preparation before driving.
Page 277: Fuel Economy
Driving safety Fuel economy Driving, alcohol and drugs N00628800107 N00628900010 Fuel economy is dependent on many factors. Your personal Drunk driving is one of the most frequent causes of accidents. driving habits can have a significant effect on your fuel use. Your driving ability can be seriously impaired even with blood Several recommendations for achieving the greatest fuel econ- alcohol levels far below the legal minimum.
Page 278: Vehicle Preparation Before Driving
Driving safety Vehicle preparation before driving Floor mats N00629000500 For a safer and more enjoyable trip, always observe the follow- WARNING ing: Keep floor mats clear of the pedals by correctly lay- Seat belts and seats ing floor mats that are suitable for the vehicle. To prevent the floor mats from slipping out position, Before starting the vehicle, make certain that you and all securely retain them using the hooks etc.
Page 279: Safe Driving Techniques
If you plan to drive in another country, obey their vehicle should, therefore, be performed only by an authorized registration laws and make sure you will be able to get the Mitsubishi Motors dealer. right fuel. Lights Have someone watch while you turn all the exterior lights on and off.
Page 280: Driving During Cold Weather
Driving safety Driving during cold weather Check the engine antifreeze. If there is not enough coolant because of a leak or from N00629400168 engine overheating, add high-quality ethylene glycol anti- Check the battery, including terminals and cables. During freeze and water. The recommended blend is about 50 % extremely cold weather, the battery will not be as strong.
Page 281: Braking
All the parts of the brake system are critical to safety. Have the Parking on a hill vehicle serviced by an authorized Mitsubishi Motors dealer or When parking on a hill, set the parking brake, and turn the a repair facility of your choice at regular intervals according to front wheels toward the curb on a downhill, or away from the the “WARRANTY AND MAINTENANCE MANUAL”.
Page 282: Loading Information
Driving safety Parking with the engine running Loading information Never leave the engine running while you take a short N00629900336 It is very important to know how much weight your vehicle can sleep/rest. Also, never leave the engine running in a closed or carry.
Page 283: Tire And Loading Information Placard
Driving safety Tire and loading information placard Curb weight: the weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil, N00630100354 The tire and loading information placard is located on the and coolant. driver’s door sill. Accessory weight: the combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power win-...
Page 284 Driving safety This placard shows the maximum number of occupants permit- Type B ted to ride in your vehicle as well as “the combined weight of occupants and cargo” (C), which is called the vehicle capacity weight. This placard also tells you the size and recommended inflation pressure for the original equipment tires on your vehi- cle.
Page 285 Driving safety Steps for Determining Correct Load Limit 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Con- N00630200081 Locate the statement “The combined weight of occu- sult this manual to determine how this reduces the pants and cargo should never exceed XXX kg or available cargo and luggage load capacity of your XXX lbs.”...
Page 286 Driving safety NOTE The following table shows examples on how to calculate total cargo/load capacity of your vehicle with varying seating config- urations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load capacity of your vehicle.
Page 287: Cargo Loads
Driving safety Cargo loads WARNING N00629700347 To reduce the risk of serious injury or death, the Cargo load precautions combined weights of the driver, passengers and To determine the cargo load capacity for your vehicle, subtract cargo and must never exceed the vehicle capacity the weight of all vehicle occupants from the vehicle capacity weight.
Page 288: Trailer Towing
Driving safety Trailer towing N00629800188 WARNING Do not use this vehicle for trailer towing. It may not be possible to maintain control or adequate braking. I n f o r ma t i o n P r o v i d e d b y : 4-13...
Page 289 I n f o r ma t i o n P r o v i d e d b y :...
Page 290: Comfort Controls
Comfort controls Vents........5- Manual air conditioning (if so equipped)..5- Automatic air conditioning (if so equipped) .
Page 291: Vents
Comfort controls Vents Air flow and direction adjustments N00730200125 N00729900135 Center/Side vents Adjust the direction of the air flow by moving the knob (A). 1- Center vents 2- Side vents NOTE NOTE On rare occasions, air from the vents of an air-conditioned Do not place beverages on top of the instrument panel.
Page 292 Comfort controls Changing the mode selection Foot/Face position Air flows to the upper part of the passenger compartment, and N00736400451 To change the position and amount of air flowing from the flows to the leg area. vents, turn the mode selection dial. (Refer to “Mode selection dial”...
Page 293 Comfort controls Foot position Foot/Defroster position Air flows mainly to the leg area. Air flows to the leg area, the windshield and the door windows. NOTE With the mode selection dial between the “ ” and “ ” positions, air flows mainly to the leg area. With the mode selection dial between the “...
Page 294: Control Panel
Comfort controls Manual air conditioning Defroster position (if so equipped) Air flows mainly to the windshield and the door windows. N00730300100 The air conditioning can only be used while the engine is run- ning. Control panel N00730500144 NOTE When the mode selection dial is set to the “ ”...
Page 295 Comfort controls Blower speed selection dial Temperature control dial N00736500087 N00736600121 When the ignition key is in the ON position, select the blower Turn the temperature control dial clockwise to make the air speed by turning the blower speed selection dial. The blower warmer.
Page 296 Comfort controls Mode selection dial Air selection switch N00736700164 N00736800165 To change the position and amount of air flowing from the Normally, use the outside position to keep the windshield and vents, turn the mode selection dial. (Refer to “Changing the side windows clear and to quickly remove fog or frost from the mode selection”...
Page 297 Comfort controls Air conditioning switch NOTE When the “ ” or “ ” position is selected, you cannot N00731000319 Push the switch, and the air conditioning compressor will turn turn the air conditioning off or use the recirculation posi- on. The air conditioning indicator light (A) will come on. tion.
Page 298 (A) does not blink, there is no problem. If it does Turn the temperature control dial clockwise or counterclock- blink, have it checked at an authorized Mitsubishi Motors wise to the desired temperature. Select the desired blower dealer or a repair facility of your choice.
Page 299 Comfort controls Cooling NOTE If the outside air is dusty or contaminated in some way, set N00731200177 the air selection switch (A) to the recirculation position. For ordinary cooling Let in some outside air from time to time for good ventila- tion.
Page 300 Comfort controls Combination of unheated air and heated air NOTE When the temperature control dial is set to the “MAX N00731300110 Select the mode selection dial to the positions shown in the A/C” position, the air conditioning compressor will run illustration and set the air selection switch (A) to the outside automatically and the light will come on.
Page 301 Comfort controls Defrosting or defogging the windshield and door win- For ordinary defrosting Use this setting to keep the windshield and door windows clear dows of mist, and to keep the leg area heated (when driving in rain or N00731400430 snow).
Page 302 Comfort controls For quick defrosting NOTE When the mode selection dial is set to the “ ” or “ ” position, the air conditioning compressor runs automati- cally. The outside air position will be also selected auto- matically. (In this case, the air conditioning indicator light will not change.) When the “...
Page 303: Automatic Air Conditioning (If So Equipped)
Comfort controls Automatic air conditioning (if so equipped) Type 2 N00731500066 The air conditioning can only be used while the engine is run- ning. Control panel N00711800382 Type 1 1- Temperature control dial 2- Air selection switch 3- Blower speed selection dial 4- Air conditioning switch 5- Electric rear window defogger switch →...
Page 304 Comfort controls Blower speed selection dial NOTE There is an interior air temperature sensor (A) in the illus- N00736900081 When the ignition key is in the ON position, select the blower trated position. speed by turning the blower speed selection dial. The blower Never place anything over the sensor, since doing so will speed will gradually increase as the dial is turned to the right.
Page 305 Comfort controls Temperature control dial Type 2 N00737000164 Turn the temperature control dial clockwise to make the air warmer. Turn it counterclockwise to make the air cooler. Type 1 NOTE While the engine coolant temperature is low, the tempera- ture of the air from the heater will be cool/cold until the engine warms up, even if you have selected warm air with the dial.
Page 306 Comfort controls Mode selection dial Air selection switch N00737100152 N00737200195 To change the position and amount of air flowing from the Normally, use the outside position to keep the windshield and vents, turn the mode selection dial. (Refer to “Changing the side windows clear and to quickly remove fog or frost from the mode selection”...
Page 307 Comfort controls Air conditioning switch CAUTION N00737300196 Push the switch, and the air conditioning compressor will turn Using recirculated air for a long time may cause the on. The air conditioning indicator light (A) will come on. windows to fog up. NOTE When the “...
Page 308 If the air conditioning indicator light (A) does not blink, there is no problem. If it does blink, have it checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
Page 309 Comfort controls Operating the air conditioning system (manual NOTE Set the temperature {at about 75 (Type 1) or 25 (Type 2) mode) under normal conditions}. N00731800027 When the temperature is set to the highest or the lowest Blower speed and vent mode may be controlled manually by setting under the AUTO operation, the air selection and setting the blower speed selection dial and the mode selection the air conditioning will be automatically changed as fol-...
Page 310 Comfort controls For ordinary defrosting For quick defrosting Use this setting, to keep the windshield and door windows clear of mist, and to keep the leg area heated (when driving in rain or snow). 1. Set the mode selection dial to the “ ”...
Page 311: Important Air Conditioning Operating Tips
If the air conditioning seems less effective than usual, the cause might be a refrigerant leak. Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 312 Comfort controls CAUTION The air conditioning system in your vehicle must be charged with the refrigerant HFC-134a and the lubricant SUN-PAG56. Use of any other refrigerant or lubricant will cause severe damage and may require replacing your vehi- cle’s entire air conditioning system. The release of refrigerant into the atmosphere is not recommended.
Page 313: Audio System
Comfort controls Audio system N00734300906 Your vehicle is equipped with the following audio system: (1) AM/FM electronically tuned radio with CD player (Type 1) → P.5-26 (2) AM/FM electronically tuned radio with CD autochanger (Type 2) → P.5-39 (3) AM/FM/Satellite electronically tuned radio with CD autochanger (Type 3) → P.5-39 The audio system can only be used when the ignition switch is in the “ON”...
Page 314 The rized Mitsubishi Motors dealer or a repair facility of your subscription service provider is SIRIUS™ Satellite Radio. This choice.
Page 315 Comfort controls AM/FM electronically tuned radio with CD player-Type 1 (if so equipped) N00734300124 Volume and tone control panel N00711900572 1- PWR (On-Off) switch 2- VOL (Volume control) knob 3- AUDIO switch 4- Display I n f o r ma t i o n P r o v i d e d b y : 5-26...
Page 316 Comfort controls To adjust the volume N00712000323 VOL (Volume control) Turn the VOL knob (2) clockwise to increase the volume; counterclockwise to decrease the volume. The status will be displayed in the display (4). NOTE The volume control mode will shut off automatically if either the radio or CD is selected, or if no adjustment is made within about 2 seconds.
Page 317 Comfort controls To adjust the tone N00712100281 1. Press the AUDIO switch (3) repeatedly to select the tone or balance control to change. The order is: BASS → TRE → FADE → BAL → Audio adjust mode off. The status will be displayed in the display (4). I n f o r ma t i o n P r o v i d e d b y : 5-28...
Page 318 Comfort controls 2. Turn the AUDIO switch (3) either clockwise or counter- clockwise to change the tone/balance setting. Adjusting operation Mode Clockwise Counterclockwise BASS Increase Decrease Increase Decrease More sound from the More sound from the FADE rear speakers front speakers More sound from the More sound from the right speakers...
Page 319 Comfort controls Radio control panel and display N00734900869 1- PWR (On-Off) switch 2- Memory select buttons 3- RADIO (AM/FM selection) button 4- SEEK (Up-seek) button 5- SEEK (Down-seek) button 6- SCAN button 7- TUNE/FOLDER switch 8- SCAN indicator 9- AM/FM (AM/FM1/FM2) indicator 10- Preset memory number display 11- ST (Stereo) indicator 12- Frequency display...
Page 320 Comfort controls To listen to the radio To store a frequency in the memory, follow these steps: 1. Press the SEEK button (4 or 5), or turn the N00735000737 1. Press the PWR switch (1) to turn the audio system on and TUNE/FOLDER switch (7) to tune to the frequency you off.
Page 321 Comfort controls CD control panel and display N00735300583 16- Track play time display 1- PWR (On-Off) switch 2- CD eject button 3- Disc loading slot 4- RADIO (AM/FM selection) button 5- CD (CD mode changeover) button 6- TRACK (Track up) button 7- TRACK (Track down) button 8- RPT/RDM (Repeat/Random) button 9- SCAN button...
Page 322 Comfort controls To listen to a CD To listen an MP3 CD This player allows you to play MP3 (MPEG Audio Layer-3) N00735500891 1. Press the CD button (5) and the CD mode will be selected, files recorded on CD-ROMs, CD-Rs (recordable CDs), and starting a playback.
Page 323 Comfort controls Folder selection order/MP3 file playback order (Example) NOTE While listening to a disc on which CD-DA (CD-Digital Audio) and MP3 files have both been recorded, you can Root folder (root directory) switch between reading of the CD-DA and reading of the MP3 files, and the external audio input mode by pressing the CD button for 2 seconds or longer (until you hear a beep).
Page 324 Comfort controls To fast forward/reverse the disc To select a desired folder To fast forward or reverse, use the TRACK button (6 or 7). You can select your desired folder by turning the TUNE/FOLDER switch (10). Fast forward You can fast forward by holding down the side of the TRACK button (6) for more than about 1 second.
Page 325 Comfort controls To select a desired track To repeat the same track or change the order of tracks for playback You can select by using the TRACK button (6 or 7). Press the RPT/RDM button (8) to select RPT → RDM → Track up RPT/RDM mode off.
Page 326 Comfort controls Random playback for all folders on a disc (MP3 CDs only) Select the RDM mode, and the RDM indicator (12) will come on. Tracks from all the folders on the disc will be played in a random sequence. NOTE With a disc that contains both CD-DA and MP3 files, the random mode causes only files of the same format (CD-...
Page 327 Comfort controls To find the start of each track on a disc for playback Press the SCAN button (9). “SCAN” will appear on the display and the player will play back the first 10 seconds of each track on the selected disc. The track number will blink while the scan mode is selected.
Page 328: Am/Fm Electronically Tuned Radio With Cd Autochanger-Type 2 (If So Equipped) Am/Fm/Satellite Electronically Tuned Radio With Cd Autochanger-Type 3 (If So Equipped)
Comfort controls AM/FM electronically tuned radio with CD autochanger-Type 2 (if so equipped) AM/FM/Satellite electronically tuned radio with CD autochanger-Type 3 (if so equipped) N00734300821 Volume and tone control panel-Type 2, Type 3 N00711900585 1- PWR (On-Off) switch 2- VOL (Volume control) knob 3- Memory select buttons 4- AUDIO switch 5- Display...
Page 329 Comfort controls To adjust the volume N00712000192 VOL (Volume control) Turn the VOL knob (2) clockwise to increase the volume; counterclockwise to decrease the volume. The status will be displayed in the display (5). NOTE The volume control mode will shut off automatically if either the radio or CD is selected, or if no adjustment is made within about 2 seconds.
Page 330 Comfort controls To adjust the tone N00712100584 1. Press the AUDIO switch (4) repeatedly to select your desired sound customization setting to change. The order is: SUB PUNCH → BASS → MID → TRE → FADE → BAL → FIELD → TYPE → SOUND PRESET → Sound customization mode off.
Page 331 Comfort controls TRE (Treble tone control) 2. Turn the AUDIO switch (4) either clockwise or counter- clockwise to adjust the sound customization features. To select the desired treble level. FADE (Front/Rear balance control) Adjusting operation To balance the volume from the F (front) and the R (rear) Mode speakers.
Page 332 Comfort controls TYPE (Music type select) To store your current sound settings into memory, follow these steps: To select the desired music type. 1. Go to the “SOUND PRESET” setting (preset button lights Music type Description will be flashing). 2. Push one of the memory select buttons (3) for more than 2 NORMAL Sounds good for all types of music.
Page 333 Comfort controls Speed Compensated Volume function N00752200255 Speed Compensated Volume function is a feature that automat- ically adjusts the VOL, BASS, MID, and TRE settings in accordance with the vehicle speed. It is possible to turn this function ON-OFF using the following methods: 1.
Page 334 Comfort controls Radio control panel and display-Type 2 N00734900872 1- PWR (On-Off) switch 2- Memory select buttons 3- RADIO (AM/FM selection) button 4- SEEK (Up-seek) button 5- SEEK (Down-seek) button 6- SCAN button 7- TUNE/FOLDER switch 8- SCAN indicator 9- AM/FM (AM/FM1/FM2) indicator 10- Preset memory number display 11- ST (Stereo) indicator 12- Frequency display...
Page 335 Comfort controls To listen to the radio To store a frequency in the memory, follow these steps: 1. Press the SEEK button (4 or 5), or turn the N00735000740 1. Press the PWR switch (1) to turn the audio system on and TUNE/FOLDER switch (7) to tune to the frequency you off.
Page 336 Comfort controls Radio control panel and display-Type 3 N00734900885 1- PWR (On-Off) switch 2- Memory select buttons 3- RADIO (AM/FM/Satellite selection) button 4- SEEK (Up-seek) button 5- SEEK (Down-seek) button 6- SCAN button 7- TUNE/FOLDER switch 8- SCAN indicator 9- AM/FM/SAT (AM/FM1/FM2/SAT1/SAT2/SAT3/SAT4) indicator 10- Preset memory number display 11- ST (Stereo) indicator...
Page 337 Comfort controls To listen to the radio To store a frequency in the memory, follow these steps: 1. Press the SEEK button (4 or 5), or turn the N00735000753 1. Press the PWR switch (1) to turn the audio system on and TUNE/FOLDER switch (7) to tune to the frequency you off.
Page 338 Comfort controls SIRIUS Satellite Radio control panel and display-Type 3 N00700200168 1. PWR (On-Off) switch 2. RADIO (AM/FM/Satellite selection) button 3. SEEK (Down-seek) button 4. SEEK (Up-seek) button 5. SCAN button 6. TUNE/FOLDER (Category selection) switch/AUDIO switch 7. Memory select buttons 8.
Page 339 Comfort controls To listen to SIRIUS Satellite Radio Channel selection N00760700028 N00760500130 Push the SEEK button (3 or 4) to select a channel. 1. If the audio system is OFF, turn it ON by pushing the PWR switch (1). The audio system will start working in NOTE the previously used mode.
Page 340 Comfort controls NOTE 1. If you select “CH 0”, the first 4 digits of the 12-digit SIR- Once you have stored channels in memory, you can IUS ID will be indicated 2 seconds later. instantly call up a desired channel by just pushing the cor- 2.
Page 341 Comfort controls To skip or lock a desired channel using the MENU SKIP setting (SKIP setting mode) mode N00761200033 It is possible to set a channel to be skipped during channel N00761100032 selection. It is also possible to cancel a skip setting. It is possible to make a setting to skip or lock a desired channel By turning the AUDIO switch (6), you can select “SKIP”...
Page 342 Comfort controls To skip a desired channel To cancel skip settings N00761400048 N00761500036 It is possible to set a channel to not be received during channel It is possible to cancel channel skip settings. selection. 1. Push the AUDIO switch (6) for at least about 2 seconds to 1.
Page 343 Comfort controls To unlock locked channels 5. Use the memory select buttons (7) to enter the code (1111 to 6666). N00761700054 You can unlock one or all locked channels. Unlocking one or more channels requires entry of the code. NOTE The code is set to “1111”...
Page 344 Comfort controls To change the lock cancellation code To reset the lock cancellation code N00761800055 N00761900030 It is possible to change the code for lock cancellation to any In case you forget the code, it is possible to reset the code to the desired number.
Page 345 Comfort controls CD control panel and display-Type 2, Type 3 N00735300596 16- DISC indicator 1- PWR (On-Off) switch 17- TRACK indicator 2- LOAD/EJECT button 18- Track play time display 3- Disc loading slot 4- DISC select buttons 5- RADIO (AM/FM selection) button 6- CD (CD mode changeover) button 7- TRACK (Track up) button 8- TRACK (Track down) button...
Page 346 Comfort controls To listen to a CD To set a disc The indicator light (A) shows the condition of each CD slot. N00735500905 1. Press the CD button (6) and the CD mode will be selected, starting a playback. NOTE As many as 6 CDs can be inserted into the CD autochanger.
Page 347 Comfort controls To listen an MP3 CD NOTE When the first CD has played to the end, the second CD This autochanger allows you to play MP3 (MPEG Audio will start to play automatically. When the second, third, Layer-3) files recorded on CD-ROMs, CD-Rs (recordable fourth, fifth, and sixth CDs have each played to the end, CDs), and CD-RWs (rewritable CDs) in ISO9660 Level the sequence will begin again from the first CD.
Page 348 Comfort controls Folder selection order/MP3 file playback order (Example) NOTE While listening to a disc on which CD-DA (CD-Digital Audio) and MP3 files have both been recorded, you can Root folder (root directory) switch between reading of the CD-DA and reading of the MP3 files, and the external audio input mode by pressing the CD button for 2 seconds or longer (until you hear a beep).
Page 349 Comfort controls To fast forward/reverse the disc To select a desired folder (MP3 CDs only) To fast forward or reverse, use the TRACK button (7 or 8). You can select your desired folder by turning the TUNE/FOLDER switch (11). Fast forward You can fast forward by holding down the side of the TRACK button (7) for more than about 1 second.
Page 350 Comfort controls To select a desired track To repeat the same track or change the order of tracks for playback You can select by using the TRACK button (7 or 8). Press the RPT/RDM button (9) to select RPT → RDM → Track up RPT/RDM mode off.
Page 351 Comfort controls Random playback for all folders on a disc (MP3 CDs only) Select the RDM mode, and the RDM indicator (13) will come on. Tracks from all the folders on the currently selected disc will be played in a random sequence. NOTE In the all discs random mode, if an MP3 CD has been loaded in the autochanger, the autochanger will skip over...
Page 352: To Use The External Audio Input Function
Comfort controls To use the external audio input function To find the start of each track on a disc for playback Press the SCAN button (10). “SCAN” will appear on the dis- N00702200162 play and the autochanger will play back the first 10 seconds of each track on the selected disc.
Page 353 Comfort controls To activate the external audio input mode NOTE The connected audio equipment cannot be operated with the vehicle’s audio system. Depending on the connected audio equipment, it may pro- duce noise from the speakers. Use the connected audio equipment’s own power source, such as its battery.
Page 354: Steering Wheel Audio Remote Control Switch (If So Equipped)
Comfort controls Steering wheel audio remote control switch NOTE Do not push two or more of the steering wheel remote (if so equipped) control switches at the same time. N00714800413 The remote control switches are located on the rear surface of To turn on the power the steering wheel.
Page 355 Comfort controls Automatic radio tuning To fast-forward/fast-reverse the disc (Type 1 and Type 2 audio system only) Seek up button — 1/Seek down button — 5 To fast-forward or fast-reverse the disc, press the fast-forward After pressing these buttons, reception of the selected station button (1) or the fast-reverse button (5).
Page 356: Error Codes (Sirius Satellite Radio)
Disc error sive vehicle vibration. stop. Eject disc and reload. If disc will not eject, bring your vehicle to your authorized Mitsubishi E 03 Mechanism error Loading or eject error. Pick-up is out of position. Motors dealer or a repair facility of your choice for repair.
Page 357 Comfort controls Error display Problem Description Repair Communication error between external device Bring your vehicle to your authorized Mitsubishi Communication or E Com and audio equipment. Motors dealer or a repair facility of your choice power supply error Power supply error of external device.
Page 358 Error display Problem Description Repair The antenna may be faulty, not securely con- Take the vehicle to your authorized Mitsubishi Antenna error nected, or open-circuited. Motors dealer or a repair facility of your choice. Cannot pick up sig- Move to a place where the signal is easy to LINKING The signal is too weak to be received.
Page 359 (Underscore) IUS. channel. Mechanical fault or Take the vehicle to your authorized Mitsubishi SAT E There is a mechanical fault or a bad connection. bad connection Motors dealer or a repair facility of your choice.
Page 360: Handling Of Compact Discs
Comfort controls Handling of compact discs N00734100177 Use only the type of compact discs that have the mark shown in the illustration below. (Playback of CD-R or CD-RW discs may cause problems.) The use of special shaped, damaged compact discs (like cracked discs) or low-quality compact discs (like warped discs or burrs on the discs) such as those shown will dam- age the CD player.
Page 361 Comfort controls In the following circumstances, moisture can form on To clean a disc, use a soft, clean, dry cloth. Wipe directly compact discs and inside the audio system, preventing from the center hole toward the outer edge. Do not wipe in normal operation.
Page 362 CD player by yourself. There are no user serviceable parts inside. In case of malfunction, contact an authorized Mitsubishi Motors dealer. I n f o r ma t i o n P r o v i d e d b y :...
Page 363: Antenna
Comfort controls Antenna Whip antenna (if so equipped) N00734400037 N00734200107 To remove the whip antenna, unscrew it by turning it counter- Glass antenna (if so equipped) clockwise. N00702300020 The antenna is embedded in the inner side of the rear window glass.
Page 364 Comfort controls Satellite radio antenna ECLIPSE SPYDER (if so equipped) N00702400021 The antenna is located as shown in the illustration. ECLIPSE I n f o r ma t i o n P r o v i d e d b y : 5-75...
Page 365: General Information About Your Radio
Comfort controls General information about your radio Weak reception (fading) Because of the limited range of FM signals and the way FM N00733900295 Your vehicle’s radio receives both AM and FM stations. waves transmit, you may experience weak or fading FM recep- The quality of your reception is affected by distance, obstacles, tion.
Page 366 Comfort controls Cross modulation Causes of disturbances If one listens to a weak station and is in the vicinity of another FM reception is affected by the electrical systems of vehicles in strong station, both stations might be received simultaneously. the vicinity, especially those without an electronic noise sup- pression device.
Page 367 I n f o r ma t i o n P r o v i d e d b y :...
Page 368: For Emergencies
For emergencies If the vehicle breaks down ....6- Jump-starting the engine ....6- Engine overheating .
Page 369: If The Vehicle Breaks Down
For emergencies If the vehicle breaks down Jump-starting the engine N00836300073 N00836400638 If your vehicle breaks down on the road, move to the shoulder If the engine cannot be started because the battery is weak or and turn on the hazard warning flashers. If there is no shoulder, dead, you can start it with the battery from another vehicle or the shoulder is not safe, drive in the right lane slowly, with using jumper cables.
Page 370 For emergencies 3. You could be injured if the vehicles move. Set the parking 5. Connect one end of one jumper cable to the positive (+) brake firmly on each vehicle. Put an automatic transaxle terminal of the discharged battery (A), and the other end in “P”...
Page 371 For emergencies 3.8 liter engine 6. Connect one end of the other jumper cable to the negative (-) terminal of the booster battery (B), and the other end to the engine block of the vehicle with the low battery (A) at the point farthest from the battery.
Page 372 For emergencies As your vehicle has anti-lock brakes 8. After the engine is started, disconnect the cables in the reverse order from the way you connected them. If you drive your vehicle with a low battery charge, after the engine has been started by using jumper cables, the engine may WARNING misfire.
Page 373: Engine Overheating
Steam or spray coming from an overheated engine authorized Mitsubishi Motors dealer or a repair facility of could seriously scald you. your choice for assistance.
Page 374 If there is none, or if it is too low, returns to the normal zone. slowly add coolant. 11. Have your vehicle checked by your authorized Mitsubishi 8. If the reserve tank needs coolant, you will probably also Motors dealer or a repair facility of your choice.
Page 375: Tools And Jack
For emergencies Tools and jack Tools N00832600108 N00836600223 Storage 1- Tool bag 2- Bar 1- Tools 3- Wheel nut wrench 2- Jack NOTE When returning the tools to the tool bag, place each one in The tools and jack are stowed beneath the luggage floor board its own pocket.
Page 376: How To Change A Tire
For emergencies Jack How to change a tire N00832700109 N00836900721 Before removing the jack, lift up the luggage floor board. Before changing a tire, first stop your vehicle in a safe, flat location. 1. Park the vehicle on level and stable ground. 2.
Page 377 For emergencies NOTE 5. To prevent the vehicle from rolling when it is raised on the The chocks shown in the illustration do not come with jack, place chocks or blocks (A) at the tire that is diago- your vehicle. It is recommended that you purchase chocks nally opposite from the tire (B) you are changing.
Page 378 When the compact spare tire is used, the tire pressure monitoring system will not work properly. See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. If your vehicle has aluminum type wheels, you can use the same wheel nuts on the compact spare tire wheel.
Page 379 For emergencies To remove the spare tire CAUTION N00849700101 Because the compact spare tire is designed only for 1. Lift up the luggage floor board. your vehicle, do not use it on any other vehicle. 2. To remove the spare tire, remove the installation clamp Do not put the compact spare tire on a different (A) by turning it counterclockwise.
Page 380 For emergencies To change a tire N00849800320 1. Loosen the wheel nuts with the wheel nut wrench. Do not remove the wheel nuts yet. NOTE Put the spare tire under the vehicle body near the jack. This makes it safer if the jack slips out of position. I n f o r ma t i o n P r o v i d e d b y : 6-13...
Page 381 For emergencies 2. Place the jack under one of the jacking points (A) shown WARNING in the illustration. Use the jacking point closest to the tire Set the jack only at the positions shown here. If the you wish to change. jack is set at a wrong position, it could dent your ECLIPSE vehicle or the jack might fall over and cause per-...
Page 382 For emergencies 4. Insert the bar (D) into the wheel nut wrench (E). Then put WARNING the end of the bar into the shaft’s jack end, as shown in the No one should be in your vehicle when using the illustration.
Page 383 For emergencies 6. Clean out any mud, etc. on the hub surface (F), hub bolts WARNING (G) or in the installation holes (H) in the wheel, and then Mount the spare wheel with the valve stem (I) facing mount the spare tire. outboard.
Page 384 For emergencies [Compact spare wheel] 7. [Normal wheels] Install the wheel nuts with their tapered ends facing Temporarily tighten the wheel nuts (flange nuts) until inward, then tighten by hand until the wheel is no longer their flange section comes in contact with the wheel and it loose.
Page 385 For emergencies 8. Lower the vehicle slowly by rotating the wheel nut 9. Tighten the nuts in the order shown in the illustration until wrench counterclockwise until the tire touches the each nut has been tightened to the torque listed here. ground.
Page 386 When the compact spare tire is used, the tire pressure monitoring system will not work properly. See an authorized Mitsubishi Motors dealer as soon as possible to replace or repair the original tire. After changing the tire and driving the vehicle about 620 miles (1,000 km), retighten the wheel nuts to make sure that they have not come loose.
Page 387: Towing
For emergencies Towing N00837000732 If your vehicle needs to be towed If towing is necessary, we recommend you to have it done by a commercial tow truck service. When towing is required, transport the vehicle using a tow truck. Incorrect towing equipment could damage your vehicle. CAUTION Do not attempt to be towed by another vehicle with a rope.
Page 388 For emergencies Towing the vehicle by a tow truck Towing with rear wheels off the ground (Type B) Place the gearshift lever in the “Neutral” position (manual CAUTION transaxle) or the selector lever in the “N” (NEUTRAL) posi- tion (automatic transaxle). This vehicle must not be towed by a tow truck using Turn the ignition key to the “ACC”...
Page 389: Operation Under Adverse Driving Conditions
For emergencies Operation under adverse driving conditions Towing with front wheels off the ground (Type C) Release the parking brake. N00837200659 Place the gearshift lever in the “Neutral” position (manual If your vehicle becomes stuck in sand, mud or transaxle) or the selector lever in the “N” (NEUTRAL) posi- snow tion (automatic transaxle).
Page 390 For emergencies On wet roads On snowy or icy roads When driving on a road covered with snow or ice, use CAUTION snow tires. Tire chains cannot be used on your vehicle. There may be state or local regulations about using snow Avoid flooded roads.
Page 391 For emergencies On a bumpy or rutted road Drive as slow as possible when driving on bumpy or rutted roads or over pothole etc. CAUTION Driving on bumpy, rutted roads or over potholes can damage the tires and wheels. Wheels with low-profiles tires or under-inflated tires are especially at risk for damage.
Page 392: Vehicle Care And Maintenance
Vehicle care and maintenance Fuse links....... . 7- 37 Service precautions ......7- Catalytic converter .
Page 393: Service Precautions
If you discover a malfunction or other problem, have it cor- wrong way can injure you. Ask an authorized rected by an authorized Mitsubishi Motors dealer or a repair Mitsubishi Motors dealer or a repair facility of your facility of your choice.
Page 394: Catalytic Converter
Mitsubishi Motors dealer or a repair facility of your choice for service. I n f o r ma t i o n P r o v i d e d b y :...
Page 395: Engine Hood
Vehicle care and maintenance Engine hood Release the safety lever and lift the engine hood. N00937500350 To open Use the engine hood release lever (located under the instrument panel near the driver’s door) to unlock the engine hood. Pull the lever toward you to release the engine hood latch. NOTE To prevent damage to the engine hood and wipers, make sure the wipers are at resting position when you open the...
Page 396 Vehicle care and maintenance To close Support the engine hood with the hood prop. Insert the hood prop securely in the opening under the hood marked with an Unlatch the prop from the engine hood and put it back in its arrow.
Page 397: View Of The Engine Compartment
Vehicle care and maintenance View of the engine compartment 3.8 liter engine N00937600540 2.4 liter engine 1- Power steering fluid reservoir 2- Brake fluid/Clutch fluid reservoir (if so equipped) 3- Battery 4- Windshield and rear window washer (ECLIPSE only) fluid reservoir 5- Engine oil level dipstick 6- Engine oil filler cap...
Page 398: Engine Oil And Oil Filter
Vehicle care and maintenance Engine oil and oil filter 3.8 liter engine N00937700828 To check and refill engine oil It is normal for an engine to use oil. You may need to add oil between the recommended oil change intervals. Before starting Good the engine, check the engine oil level.
Page 399 “WARRANTY AND MAINTENANCE MANUAL”. Engine oil identification mark Mitsubishi Motors recommends using only engine oils with the ILSAC certification symbol on the front of the container. ILSAC certification symbol 1- The top portion shows the quality of the oil.
Page 400 Only use high quality replacement filters on this vehicle. The manufacturer’s specifications for Genuine Mitsubishi oil filters require that the filter can withstand a pressure of 256 psi (1.8 MPa). A Genuine Mitsubishi oil filter is the best replace- ment filter. Follow the installation instructions printed on the filter.
Page 401: Engine Coolant
Take your vehicle to an by itself boils at a lower temperature and does not authorized Mitsubishi Motors dealer or a repair facility of your stop rust or freezing. If the water freezes, it will choice for testing.
Page 402: Air Cleaner Filter
After replacing the air cleaner filter, put the cover back on in its the engine is warmed-up, take your vehicle to an autho- original position. rized Mitsubishi Motors dealer or a repair facility of your choice to have the thermostat checked, and replaced if 3.8 liter models necessary.
Page 403: Automatic Transaxle Fluid (If So Equipped)
N00938000512 The automatic transaxle should be maintained and serviced by an authorized Mitsubishi Motors dealer or a repair facility of your choice to obtain the best performance and longest life. It is important that the transaxle fluid is kept at the correct level.
Page 404 Special additives 2. The fluid level should be at the HOT mark, but never Mitsubishi Motors Corporation does not recommend the addi- above the HOT mark when the engine is warmed up. Add tion of any fluid additives to the transaxle.
Page 405: Manual Transaxle Oil (If So Equipped)
Vehicle care and maintenance Manual transaxle oil Washer fluid (if so equipped) N00938200149 N00938600202 Whenever the manual transaxle oil level is checked, add oil to The windshield and rear window washer (ECLIPSE only) fluid maintain the proper level, if necessary. reservoir is in the engine compartment.
Page 406: Brake Fluid/Clutch Fluid (If So Equipped)
N00938700229 If this occurs, have the vehicle checked by an authorized The brake fluid and the clutch fluid share the reservoir tank. Mitsubishi Motors dealer or a repair facility of your choice. To check the fluid level Fluid type The fluid level must be between the “MAX” and “MIN” marks Use the brake fluid conforming to DOT 3 or DOT 4.
Page 407: Power Steering Fluid
“MAX” and “MIN” level markings on the If battery performance is suspect, have the battery and charging fluid reservoir and refill the fluid, if necessary. system tested by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Fluid type...
Page 408: Checking Battery Electrolyte Level
Vehicle care and maintenance Checking battery electrolyte level 2. The inside of the battery is divided into several compart- ments. Use the following procedure to check the battery electrolyte Check the electrolyte level (A) in each cell. level. The electrolyte level must be within the range (B) shown 1.
Page 409: Disconnection And Connection
It is recommended that you have your battery and charging sys- tem checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice before the start of cold weather. If necessary, have it charged. This will guarantee more reliable starting, and longer battery life.
Page 410 If the electrolyte level is very low, have the battery Never short-circuit the battery. This could cause it checked at an authorized Mitsubishi Motors dealer to overheat and be damaged. or a repair facility of your choice. Keep sparks, cigarettes, and flames away from the Battery terminals and related accessories contain battery because the battery could explode.
Page 411: Tires
Vehicle care and maintenance Tires Intended outboard sidewall: • The sidewall that contains a whitewall, bears white let- N00939200478 tering or bears manufacturer, brand, and/or model name WARNING molding that is higher or deeper than the same molding on the other sidewall of the tire, Driving with tires that are worn, damaged or improperly inflated is dangerous.
Page 412: Tire Markings
Vehicle care and maintenance Cord: the strands forming the plies in the tire. Size Designation Rim: a metal support for a tire or a tire and tube assembly EXAMPLE:P215/65R15 upon which the tire beads are seated. Rim diameter: nominal diameter of the bead seat. Passenger car tire size based on U.S.A.
Page 413 Vehicle care and maintenance Service Description Tire Identification Number (TIN) may be found on both sides of the tire but the The TIN date code and optional code may only be on one side. EXAMPLE: 95H Look for the TIN on the outboard side of tires as mounted Load index on the vehicle.
Page 414: Tire Inflation Pressures
Vehicle care and maintenance Tire inflation pressures Treadwear, Traction and Temperature Grades N00939300772 Treadwear Proper tire inflation pressure is essential for the safe and satis- The treadwear grade is a comparative rating based on the wear factory operation of your vehicle. The wrong tire pressure will rate of the tire when tested under controlled conditions on a cause problems in three major areas: specified government test course.
Page 415 Vehicle care and maintenance The recommended inflation pressures should be used for the You should also take the following safety precautions: tires listed below. Keep your tires inflated to the recommended pressures. (See the tire and loading information placard attached to the driver’s door sill.) Item Tire size...
Page 416: Tire Maintenance
Consult an authorized Mitsubishi Motors dealer or a repair facility of your choice before using wheels that you have. As your vehicle is equipped with a tire pressure monitoring system, use only Mitsubishi genuine wheels.
Page 417: Tire Rotation
Abnormal wear is usually caused by a wrong tire pressure, wheels that are not aligned properly, wheels that are out-of-balance, or severe braking. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice to find out the reason for uneven tread wear.
Page 418 Vehicle care and maintenance CAUTION Tires that do not have arrows showing rotation direction If the tires have arrows (A) indicating the correct direction of rotation, swap the front and rear tires on the left-hand side of the vehicle and the front and Front rear tires on the right-hand side of the vehicle sepa- rately.
Page 419: Snow Tires
See an authorized Mitsubishi Motors dealer when you replace a tire or wheel. I n f o r ma t i o n P r o v i d e d b y :...
Page 420: Clutch Pedal Free Play (If So Equipped)
Vehicle care and maintenance Tire chains Clutch pedal free play (if so equipped) N00940100015 N00940200045 To check the clutch pedal free play (A), turn off the engine and CAUTION press the pedal until you feel resistance. Tire chains cannot be used on your vehicle. The Clutch pedal free play: clearance between the chains and the body is not .2 to .5 inch (6 to 13 mm)
Page 421: Brake Pedal Free Play
Also check to see if the lever stays gripped by the ratchet after pulling. If the free play is not within these limits, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice for adjustment. WARNING...
Page 422: Wiper Blades
To be sure the emission-control system works properly, have your vehicle inspected and maintained by an authorized Mitsubishi Motors dealer or a repair facility of your choice fol- lowing the schedule in the “WARRANTY AND MAINTE- NANCE MANUAL”.
Page 423: Spark Plugs
NOTE or fire. Call an authorized Mitsubishi Motors dealer Use the spark plugs listed under “Engine specifications” or a repair facility of your choice for assistance.
Page 424: General Maintenance
Have the system checked at an authorized Mitsubishi Motors nance. dealer at the mileage specified in the “WARRANTY AND But, if any of these parts stops working properly, your vehicle MAINTENANCE MANUAL”.
Page 425: Air Conditioning Compressor
Vehicle care and maintenance Ball joint, steering linkage seals and drive shaft 2.4 liter boots N00941800077 Check the following parts for damage and grease leaks: Ball joint boots of the front suspension and steering link- Bellows on both ends of the drive shaft Drive belt (for generator, power steering pump, air conditioning compressor) N00941900124...
Page 426 Vehicle care and maintenance 3.8 liter models Amount of belt deflection 3.8 liter Standard value Used belt New belt .48 to .64 inch .52 to .59 inch .38 to .48 inch (12.3 to 16.2 mm) (13.2 to 15.1 mm) (9.6 to 12.3 mm) .33 to .42 inch .35 to .40 inch .24 to .30 inch...
Page 427: Timing Belt
Vehicle care and maintenance Exhaust system Timing belt N00942200078 N00942300053 The timing belt should be replaced with a new one at the mile- WARNING age listed in the “WARRANTY AND MAINTENANCE MANUAL”. Carbon monoxide gas from your vehicle’s exhaust is poisonous.
Page 428: For Cold And Snowy Weather
The ventilation slots in front of the windshield should be kept In case of a melted fuse link, see your authorized Mitsubishi clear of leaves or brushed clear after a heavy snowfall, so that...
Page 429: Fuses
Vehicle care and maintenance Fuses Engine compartment N00942800263 In the engine compartment, the fuse block is located as shown Fuse block location in the illustration. N00901000064 To prevent damage to the electrical system from short-circuit- ing or overloading, each individual circuit is equipped with a fuse.
Page 430 Vehicle care and maintenance Type A 1. Push the lock lever. 2. Remove the fuse block cover. WARNING Do not touch the electronic control module (D). The module surface can be too hot. Wait for the electronic control module to cool down before replacing a fuse.
Page 431 Vehicle care and maintenance Type B (ECLIPSE SPYDER only) Type C (2.4 liter models only) 1. Pull the lock lever. 1. Push the lock lever. 2. Open the cover. 2. Remove the relay box cover. *- Front of the vehicle Fuse load capacities N00954800127 This fuse list shows the names of the electrical systems and...
Page 432 Vehicle care and maintenance Passenger compartment fuse location table Symbol Electrical system Capacity Passenger compartment fuse location Ignition coil 10 A Gauge 7.5 A Back-up lights 7.5 A Electric convertible top 7.5 A Relay 7.5 A Door mirror heater 7.5 A —...
Page 433 Vehicle care and maintenance Engine compartment fuse location table Symbol Electrical system Capacity Sunroof 20 A 2.4 liter & 3.8 liter models — — — Engine compartment fuse location Electric window control 7.5 A Electric convertible top 15 A — Spare fuse 20 A —...
Page 434 Vehicle care and maintenance Symbol Electrical system Capacity Symbol Electrical system Capacity 10 A* Fuse (+B) 80 A* Headlight low beam (left) 20 A* 30 A* Radiator fan motor Position light (right) 7.5 A 50 A* Position light (left) 7.5 A Anti-lock braking system 60 A* Dome light...
Page 435 Vehicle care and maintenance 2.4 liter models Identification of fuse N00901100049 Engine compartment fuse location Capacity Color 7.5 A Brown 10 A 15 A Blue 20 A Yellow (fuse type) / Light blue (fusible link type) 30 A Green (fuse type) / Pink (fusible link type) 40 A Green 50 A...
Page 436: Fuse Replacement
Vehicle care and maintenance Fuse replacement 4. Clamp it on the fuse you wish to remove, and pull the fuse straight out from the fuse block. N00954900069 1. Before replacing a fuse, always turn off the electrical item connected to the fuse and turn the ignition key to the “LOCK”...
Page 437 CAUTION Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the problem checked. Never use a fuse with a capacity greater than the one listed or any substitute, such as wire, foil etc.
Page 438: Replacement Of Light Bulbs
If you are unsure of how to carry out the work as required, it is recommended that these procedures be carried out by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Be careful not to scratch the vehicle body when removing a light and lens.
Page 439 Vehicle care and maintenance Outside (front) Except for vehicles with high intensity discharge headlights N00900900037 Vehicles with high intensity discharge headlights Wattage or ANSI Trade No. Description Candle power or Bulb type 5- Headlight 60/55 W Wattage or ANSI Trade No. Description Candle power or Bulb type...
Page 440 14- License plate light NOTE The high-mounted stop light and the stop and tail lights use LEDs rather than bulbs. For repair and replacement, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. Wattage or ANSI Trade No.
Page 441 The dome light (front)/reading lights (vehicles with sunroof) use LEDs rather than bulbs. For repair and replacement, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 442 The dome light/reading lights use LEDs rather than bulbs. For repair and replacement, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 443 Vehicle care and maintenance Headlights (except for vehicles with high inten- 2. Turn the bulb (B) counterclockwise, and then remove the sity discharge headlights) headlight bulb with holder. N00943100162 1. Depress the tab (A) on the harness connector and pull the harness connector toward you to remove it.
Page 444 N00943200121 The alignment of the headlights should be checked by an Handle halogen light bulb with care. The gas inside authorized Mitsubishi Motors dealer or a repair facility of your a halogen light bulb is highly pressurized, so drop- choice.
Page 445 Vehicle care and maintenance 2. Remove the socket and bulb assembly (B) together by 3. Remove the bulb by pulling it out. turning it counterclockwise. 4. To install the bulb, perform the removal steps in reverse. I n f o r ma t i o n P r o v i d e d b y : 7-54...
Page 446 Vehicle care and maintenance Front turn signal lights (vehicles with high inten- 2. Remove the socket and bulb assembly (B) together by sity discharge headlights) turning it counterclockwise. N00943400022 1. When replacing the bulb on the left side, remove the cap (A) of the headlight by turning it counterclockwise.
Page 447 Vehicle care and maintenance Front turn signal, parking and side-marker lights 3. Remove the bulb by pulling it out. (except for vehicles with high intensity discharge headlights) N00943400048 1. Remove the entire socket and bulb assembly (A) by turn- ing it clockwise (the left side) or counterclockwise (the right side).
Page 448: Front Fog Lights
Vehicle care and maintenance Front fog lights 2. Depress the tab (B) on the harness connector and pull the harness connector to remove it. N00943600675 1. Remove the three clips (A) by turning them counterclock- wise or prying them, and remove the two screws (B) by turning them counterclockwise, then remove the cover (C).
Page 449 Vehicle care and maintenance 2. Remove the socket and bulb assembly (D) by turning 3. Disconnect the harness connector by pulling the tab (E) in them counterclockwise. the direction of the arrow as shown. Then pull the harness connector (F) to remove the bulb. 4.
Page 450: Rear Combination Lights
Vehicle care and maintenance Rear combination lights CAUTION N00943700445 Handle halogen light bulb with care. The gas inside ECLIPSE a halogen light bulb is highly pressurized, so drop- 1. Open the rear hatch. ping, knocking, or scratching a halogen light bulb Push the center of the clips (A) and remove them.
Page 451 Vehicle care and maintenance 2. Remove the clip (A) and the bolt (C). 3. Take off the trim cover (D). Remove the light case mount- ing nut (E). I n f o r ma t i o n P r o v i d e d b y : 7-60...
Page 452 Vehicle care and maintenance 4. Insert the tip of the screwdriver at the edge of the light 5. Remove the socket and bulb assemblies by turning them unit, pry gently to remove the light unit. counterclockwise. Then move the light unit toward the rear of the vehicle Remove the bulb by pulling it out.
Page 453 Vehicle care and maintenance ECLIPSE SPYDER 6. To install the bulb, perform the removal steps in reverse. 1. Open the trunk lid. NOTE Push the center of the clips (A) and remove them. Then When mounting the light unit, align the clip (F), pins and remove the cover (B).
Page 454 Vehicle care and maintenance 2. Remove the clip (A) and the bolt (C). 3. Remove the trim cover clips (D) in the order of their num- bers (1, 2). I n f o r ma t i o n P r o v i d e d b y : 7-63...
Page 455 Vehicle care and maintenance Grasp the trim cover and pull it toward you to remove the 4. Lift the trim cover. Remove the light case mounting nut clips. (E). I n f o r ma t i o n P r o v i d e d b y : 7-64...
Page 456 Vehicle care and maintenance 5. Insert the tip of the screwdriver at the edge of the light 6. Remove the socket and bulb assemblies by turning them unit, pry gently to remove the light unit. counterclockwise. Then move the light unit toward the rear of the vehicle Remove the bulb by pulling it out.
Page 457: License Plate Light
Vehicle care and maintenance License plate light 7. To install the bulb, perform the removal steps in reverse. N00944000272 NOTE 1. Remove the mounting screws (A) and remove the light When mounting the light unit, align the clip (F), pins and unit (B).
Page 458 Vehicle care and maintenance 2. Remove the socket and bulb assembly together by turning 3. Remove the bulb by pulling it out. it counterclockwise. 4. To install the bulb, perform the removal steps in reverse. I n f o r ma t i o n P r o v i d e d b y : 7-67...
Page 459 ECLIPSE (vehicles with sunroof)/ECLIPSE SPYDER Have the dome light (front)/reading light bulbs replaced at an authorized Mitsubishi Motors dealer or a repair facility of your choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 460: Glove Compartment Light
N00954200059 Have the glove compartment light bulbs replaced at an autho- from scratching the lens. rized Mitsubishi Motors dealer or a repair facility of your 2. To install the bulb, perform the removal steps in reverse. choice. I n f o r ma t i o n P r o v i d e d b y :...
Page 461 Vehicle care and maintenance ECLIPSE SPYDER 2. To install the bulb, perform the removal steps in reverse. 1. Insert the tip of a screwdriver into the notch of the lens, NOTE pry gently to remove the lens, and then remove the bulb When installing the lens, align the tab on the lens with the from the light holder.
Page 462: Vehicle Care Precautions
Do not use organic substances (solvents, kerosene, tain corrosives. If you are not sure, contact an authorized alcohol, gasoline, etc.) or alkaline or acidic solutions. Mitsubishi Motors dealer for help in choosing these materials. These chemicals can cause discoloring, staining or cracking of the surface.
Page 463 Vehicle care and maintenance Upholstery The genuine leather surface can be damaged if brushed with a nylon or synthetic fiber brush. N00945500030 Organic solvents such as benzine, alcohol, gasoline, acid 1. To maintain the value of your new vehicle, maintain the upholstery carefully and keep the interior clean.
Page 464: Cleaning The Outside Of Your Vehicle
Vehicle care and maintenance Cleaning the outside of your vehicle CAUTION N00945700016 To protect your vehicle’s finish, wash it often and thoroughly. When washing the underside of your vehicle or the wheels, wear a pair of rubber gloves to protect your If desired, you may wax your vehicle using a nonabrasive auto- hands.
Page 465 Vehicle care and maintenance Waxing CAUTION N00946000074 Make sure to do the following when using an auto- Wax your vehicle once or twice a year, or when water does not matic car wash, with help from either this manual or bead up on the paint.
Page 466: Chrome Parts
Vehicle care and maintenance Polishing Cleaning plastic parts N00946100017 N00946300178 If painted surfaces have been severely damaged and lost their Use a sponge or chamois to clean these parts. original luster and color tone, polish the surface lightly with a If a vehicle wax sticks to a gray or black rough surface of the fine polishing compound.
Page 467: Aluminum Wheels
Vehicle care and maintenance Aluminum wheels Wiper blades N00946500109 N00946700013 Use a soft cloth and glass cleaner to remove grease, dead 1. Remove dirt using a wet sponge. insects, etc., from the wiper blades. 2. Use a mild detergent on any dirt that cannot be removed Replace the wiper blades when they no longer clean the easily with water.
Page 468: Engine Compartment
Vehicle care and maintenance NOTE Always sprinkle water from above. Do not run this vehicle through any automatic car washes. These car washes may cause water to enter the vehicle and cause damage to the convertible top. If you wash the vehi- cle by hand do not spray water directly at side windows and top seals which may cause water to enter the vehicle.
Page 469 I n f o r ma t i o n P r o v i d e d b y :...
Page 470: Customer Assistance/ Reporting Safety Defects
Customer assistance/Reporting Safety Defects Consumer information (For vehicles sold in U.S.A.) ....8- Reporting Safety Defects ....8- Important facts to know in case of an accident .
Page 471: Uniform Tire Quality Grading
Customer assistance/Reporting Safety Defects Consumer information (For vehicles sold in WARNING U.S.A.) The traction grade assigned to this tire is based on N01047100100 straight-ahead braking traction tests, and does not This information is provided in compliance with the require- include acceleration, cornering, hydroplaning, or ments of the National Highway Traffic Safety Administration, peak traction characteristics.
Page 472: Reporting Safety Defects
1-888-327-4236 (TTY: 1-800-424-9153); Ottawa, Ontario K1A 0N5 go to http://www.safercar.gov; or write to: To contact Mitsubishi Motor Sales of Canada, Inc. call 1- 888-576-4878 or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. Mitsubishi Motor Sales of Canada, Inc.
Page 473: Specifications
Key information to discuss with your insurance a choice. So, if you want genuine Mitsubishi Motors parts, you may have to specifically request them. Make certain your company insurance company understands imitations are not to be used in Understand your repair estimate before approving repairs.
Page 474 Specifications Vehicle labeling ......9- Vehicle dimensions ......9- Vehicle weights .
Page 475: Vehicle Labeling
Specifications Vehicle labeling 4 - Vehicle information code plate The vehicle information code plate is located on the driver’s N01147400612 Keep a record of the vehicle identification number. This infor- side door pillar. mation will assist the police if your vehicle is stolen. 1 - Vehicle emission control information label The vehicle emission control information label is affixed on the inside panel of the engine hood.
Page 476: Engine Serial Number
Specifications Engine serial number 3.8 liter engine The engine serial number is stamped on the cylinder block as shown in the illustrations. 2.4 liter engine *- Front of the vehicle *- Front of the vehicle I n f o r ma t i o n P r o v i d e d b y :...
Page 477 Specifications Tire and loading information placard Type A N01148100573 The tire and loading information placard is located on the driver’s door sill. Type B A- All vehicles (Type A) B- Vehicles sold in Canada (Type B) I n f o r ma t i o n P r o v i d e d b y :...
Page 478: Vehicle Dimensions
Specifications Certification label Vehicle dimensions N01148200125 N01147500466 The certification label is located on the driver’s side door pillar. ECLIPSE Overall length 180.4 in (4,583 mm) Overall width 72.2 in (1,835 mm) Vehicles with 53.5 in (1,358 mm) 17 inch tires* Overall height Vehicles with 53.2 in (1,351 mm)
Page 479: Vehicle Weights
Specifications Vehicle weights N01147600757 ECLIPSE Item 2.4 liter 3.8 liter Gross vehicle weight rating (GVWR) 4,090 lb (1,855 kg) 4,332 lb (1,965 kg) Front 2,260 lb (1,025 kg) 2,469 lb (1,120 kg) Gross axle weight rating (GAWR) Rear 1,852 lb (840 kg) 1,885 lb (855 kg) Vehicle capacity weight 661 lb (300 kg)
Page 480: Engine Specifications
Specifications Engine specifications N01147700426 Item 2.4 liter 3.8 liter Engine model 4G69 6G75 Engine displacement 145.1 CID (2,378 cm³) 233.6 CID (3,828 cm³) No. of cylinders and cylinder arrangement 4 in-line 6-V60° Bore 3.43 in (87.0 mm) 3.74 in (95.0 mm) Stroke 3.93 in (100.0 mm) 3.54 in (90.0 mm)
Page 481: Battery
NOTE Contact an authorized Mitsubishi Motors dealer for details on the combination used on your vehicle. These tires satisfy vehicle loading conditions described in this owner’s manual.
Page 482: Capacities
If these oils are not available, an API classification SM Oil filter .32 qt (0.3 L) can be used. Power steering As required Genuine Mitsubishi Power Steering Fluid 4A/T 8.1 qt (7.7 L) Automatic transaxle DIAMOND ATF SP III 5A/T 8.9 qt (8.4 L)
Page 483 I n f o r ma t i o n P r o v i d e d b y :...
Page 484 Alphabetical index AM/FM electronically tuned radio with CD player-Type 1 5-26 AM/FM/Satellite electronically tuned radio with CD Accessory (installation) 1-7 autochanger-Type 3 5-39 Active stability control 3-85 Error codes 5-67 ASC indicator 3-88 Handling of compact discs 5-71 ASC OFF indicator 3-88 Steering wheel remote control switch 5-65 ASC OFF switch 3-86 Automatic transaxle 3-71...
Page 485 Alphabetical index Parking brake 3-54 Combination headlights and dimmer switch 3-126 Parking brake lever stroke 7-30 Consumer information 8-2 Pedal 3-80 Convertible top 3-31 7-76 Pedal free play 7-30 Coolant (engine) 7-10 Power brakes 3-81 Cruise control 3-90 Service brake 3-80 Indicator 3-91 Warning light 3-112 Cup holder 3-178...
Page 486 Alphabetical index Washer fluid 7-14 Fluid capacities and lubricants 9-9 Fog lights Electric convertible top 3-31 Bulb capacity 7-48 Electric rear window defogger switch 3-136 Indicator 3-112 Electronic immobilizer (Anti-theft starting system) 3-3 Replacement 7-57 Emission-control system maintenance 7-31 Switch 3-132 Engine For cold and snowy weather 7-37 Compartment 7-6...
Page 487 Alphabetical index Horn switch 3-137 Gauges 3-105 General maintenance 7-33 If the vehicle breaks down 6-2 General vehicle data 9-5 Ignition switch 3-60 Genuine parts 1-9 Important facts to know in case of an accident 8-4 Glove compartment 3-175 Indicator 3-112 Glove compartment light Indicator and warning light package 3-111 Bulb capacity 7-50...
Page 488 Alphabetical index Replacement 7-66 Outside rearview mirrors 3-58 Light dimmer control 3-110 Overheating 6-6 Loading information 4-7 Low-fuel warning light 3-109 Lubricants 9-9 Parking 4-6 Luggage hooks 3-180 Parking brake 3-54 Parking brake lever stroke 7-30 Parking and side-marker lights Manual transaxle 3-67 Bulb capacity 7-48 Fluid 9-9...
Page 489 Alphabetical index AM/FM/Satellite electronically tuned radio with CD Seats and restraint systems 2-3 autochanger-Type 3 5-39 Seat belt 2-13 General information about your radio 5-76 Adjustable seat belt shoulder anchor 2-19 Rear combination lights 7-59 Child restraints 2-24 Rear hatch 3-16 Driver’s seat belt reminder/warning light 2-18 Rear seat 2-11 Front passenger seat belt warning light 2-19...
Page 490 Alphabetical index Sun visors 3-167 Traction control function 3-85 Sunroof 3-28 Trailer towing 4-13 Supplemental Restraint System 2-36 Trip odometer 3-107 How the Supplement Restraint System works 2-39 Trunk lid 3-16 Servicing 2-57 Turn signal lights Warning light 2-44 Bulb capacity 7-48 Indicators 3-112 Lever 3-130 Replacement 7-53...
Page 491 Alphabetical index Rear window washer 3-135 Switch 3-134 Windshield washer 3-134 Waxing 7-74 Weights 9-6 Wheel Specification 9-8 Wiper Rear window wiper 3-135 Switch 3-133 Windshield wipers 3-133 Wiper blades 7-31 I n f o r ma t i o n P r o v i d e d b y :...
Page 492 I n f o r ma t i o n P r o v i d e d b y :...
Page 493 How to calculate your gasoline mileage You can calculate your miles-per-gallon or kilometers-per-litre 3. Refill the fuel tank. Record the odometer mileage again, by using the following process: as well as the gallons/litres of fuel used. 4. Subtract the first mileage number from the second number 1.
Page 494: Maintenance Record
NOTE Name of Owner Date of Purchase Address of Owner Model of Vehicle Name and Address of Dealer Vehicle Identification Number Maintenance record Kilometers Service Performed Date Inspection and Maintenance Item Miles I n f o r ma t i o n P r o v i d e d b y :...

Mitsubishi ECLIPSE 2011 User Manual

Table of Contents

General Information

Seat and Restraint Systems

Features and Controls

Driving Safety

Comfort Controls

For Emergencies

Vehicle Care and Maintenance

Quick Links

Chapters

Related Manuals for Mitsubishi ECLIPSE 2011

Summary of Contents for Mitsubishi ECLIPSE 2011