Table of Contents
Advertisement
Removing the transformer stand
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the transformer stand
Step 1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4.
Push the release button toward the top of the computer as shown. Then, lift the transformer stand
up to remove it from the computer.
Step 5.
To reattach the transformer stand, insert the two tabs
corresponding slots in the chassis. Then, push the release button toward the top of the computer
and slide the transformer stand in and down at the same time. Release the release button to
secure the transformer stand to the computer.
30
Lenovo S50-30 All-In-One PC Hardware Maintenance Manual
1
on the transformer stand into the
Hide quick links:
Advertisement
Table of Contents
