Print Speed; Paper To Use For High Speed; Head Divided Control - Epson TM-L90 Developer's Manual
Hide thumbs
Also See for TM-L90:
- Technical reference manual (212 pages) ,
- Service manual (148 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Confidential
Print speed
Default setting is Normal printing (120 mm/s maximum). The High - speed printing (150 mm/s
maximum) is selectable when the specified paper is selected. Refer to "Print Specifications" on
page1-15. Set print speed using customize value by GS ( E (Function 5).
Paper to use for high speed
If any one of the following types of thermal paper is used, the customized value setting can be
used to set the maximum print speed to 150 mm/s {5.91"/s} (level 9):
•
ENTLA series
•
TF60KS-E
•
PD160R
•
F50KS-E
•
P350
•
KF50
Head divided control
If the low capacity of the power supply is used, transmit GS ( E (Function 5) and specify 2-4 head
divided control. Then you can eliminate the power supply for dots and save current
consumption. (The deafault setting is 1 head divided control which supply power to all dots at a
time.)
Print speed is getting slow If you increase the number of division.
And if use GS ( K (Function 97), you can change head divided control while printing. You can
keep print speed if use divided printing only for the part of logo print or high density print.
Note:
Refer to ESC/POS Application Programming Guide about how to use command. Make sure to use in
combination with Function 1 and 2, when use each function of GS ( E.
4-4 Application Development Information
Rev. A
Advertisement
Table of Contents
