Table of Contents
Advertisement
12
Other connections
Important
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the system to progressive, you will not be
able to see any picture at all. In this case,
press
STANDBY/ON to put the system
in standby, then press and hold the front
panel
(stop) button for about 8 seconds
until the display shows Mem.Clr.?. Press
the front panel VOLUME – (DOWN) or +
(UP) button so that the display shows
Interlace?. Press the front panel
button to set to interlace and switch the
system back on.
When TV format is set to AUTO or NTSC:
• When set to Progressive, PAL and NTSC
discs are both output as progressive NTSC
video. See also TV format setting on
page 60
• When Component Out (above) is set to
Progressive, there is no video output from
the VIDEO and S-VIDEO jacks. If you want
to display video on more than one monitor
simultaneously, make sure that it is set to
Interlace. See also TV format setting on
page 60.
When TV format is set to PAL:
• Progressive cannot be selected. See also
TV format setting on page 60.
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525
progressive scan picture problems, it is
recommended that the user switch the
56
En
connection to the 'standard definition' output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.
This system is compatible with the following
Pioneer displays and monitors: PDP-503HDG,
PDP-504HDG, PDP-433HDG, PDP-434HDG.
Using the SCART AV output
European model only
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
•
Use a commercially available SCART
cable to connect the AV CONNECTOR to
your TV.
TV
IN
IN
OUT
L
FRONT
CENTER
SURROUND
6
6
6
L
R
TV
AUDIO
LINE 1
R
AC IN
6
6
6
SUB
WOOFER
XV-DV323/424
Note
• SCART cables are available in several
configurations. Make sure that the one you
get will work with this system and your TV/
monitor. You can find the pin assignments
below.
OPTICAL IN
IN
AUDIO
CONTROL
FM
AM
LINE 2
ANTENNA
UNBAL 75Ω
AV CONNECTOR
LOOP ANTENNA
VIDEO
OUT
VIDEO
- Quick Links:
- Features
- Home Theater Sound Setup
- Specifications
Hide quick links:
Advertisement
Table of Contents
