Additional information
Problem
Considerable noise in
radio broadcasts
(continued).
Auto tuning does not
pick up some stations.
Sound is mono only.
Error Messages
Message
Child Lock
Rec Mode On
Phones In
96k Stereo
No Surr. SP
Muting
Exit
SR+ Error
Remedy
• Connect an outdoor FM antenna (see Connecting external antennas on
page 53).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 53).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• Not applicable to the European model – The tuning interval is incorrect for
your country or region. Try switching the tuning interval (frequency step) (see
Frequency step setting on page 60).
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 21).
Description
• This message appears when the front panel buttons are pressed when the
child lock feature is active. See Child lock setting on page 59 for more on
switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see Recording mode on page 54).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the MUTE button to turn the sound on).
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
• Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.
13
67
En