Water Intake Fault; Water Drainage Fault - Miele G 4920 Operating Instructions Manual
Hide thumbs
Also See for G 4920:
- Operating instructions manual (84 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
Frequently Asked Questions
Water intake fault
Problem
The Intake/Drain indica‐
tor flashes on and off.
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code or ap‐
pears in the display.
Water drainage fault
Problem
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code shows in
the display.
52
Possible cause and solution
The water supply is turned off.
Turn on the water supply all the way.
Before fixing the fault:
Turn the dishwasher off with the button.
There is a problem with the water intake.
Turn on the water supply fully and start the pro‐
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
Possible cause and solution
Before fixing the fault:
Turn the dishwasher off with the button.
There is a problem with the water intake.
There might be water in the wash cabinet.
Clean the filter system (see "Cleaning and care -
Filter system").
Clean the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kink or loop in the drain hose.
Hide quick links:
Advertisement
Table of Contents
