Table of Contents
Advertisement
16
www.electrolux.com
2.
Measure out the detergent and
the fabric softener;
Step 4 - Starting a program
Do not put more liquid than
-
the maximum level.
Do not set the PREWASH
-
phase.
Do not set the DELAY START.
-
-
Pull out the dispenser drawer
until it stops.
-
Measure out the amount of
detergent required, pour it into
the main wash compartment
(
).
To start a program, press the
Start/Pause (
) touchpad, the
corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
After approx. 15 minutes
from the start of a program:
-
The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
-
The display will show adjusted
program duration.
-
If you wish to carry out the
"Prewash" phase, pour it into
the compartment marked
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the "MAX" mark in the
drawer).
-
Close the drawer gently.
ATTENTION !
If you turn the program selector
dial to another program when the
machine is working, the red
Start/Pause pilot light will flash 3
times and the message "
will appear on the display to
indicate a wrong selection. The
machine will not perform the new
selected program.
.
"
Hide quick links:
Advertisement
Table of Contents
