Under A Desk- Or Shelf-Mounting - Cisco Catalyst 3560-CX User Manual

Hide thumbs Also See for Catalyst 3560-CX:

Table of Contents

Switch Installation

Step 6

Remove the screw template from the desk or shelf.

Step 7

Place the switch onto the mounting screws, and slide it forward until it locks in place.

Figure 10: Mounting the Switch on Top of a Desk or Shelf

To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm) Statement

1076

Under a Desk- or Shelf-Mounting

Step 1

Use the screw template to align the mounting screw holes and also as a guide to make sure that you install the screws

under the desk or shelf with proper clearance.

Step 2

Position the screw template on top of the desk or shelf so that the edge that is marked as CABLE SIDE ENTRY faces

the front of the desk or shelf. This ensures that the power cord faces the rear of the desk or shelf after the switch is

installed.

Wait before you attach the screw template to the desk or shelf.

Note

On a Desk, Shelf, or Wall (with Mounting Screws)

Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide

Table of Contents

Show Quick Links

Table of Contents