Pstn (Line Port) - Cisco SPA232D Administration Manual
Mobility enhanced phone adapter
Hide thumbs
Also See for SPA232D:
- Provisioning manual (213 pages) ,
- Quick start manual (17 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
Configuring the Voice Settings
PSTN (LINE Port)
PSTN (LINE Port)
Cisco SPA232D Administration Guide
VoIP Fallback to PSTN section
Field
Auto PSTN
Fallback
FXS Port Polarity Configuration
Field
Idle Polarity
Caller Conn
Polarity
Callee Conn
Polarity
Use the Voice > PSTN page to configure the settings for calls through the LINE
(PSTN) port.
To open this page: Click Voice on the menu bar, and then click PSTN in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Field
PSTN Line Enable
Description
If enabled, the ATA automatically routes all calls to the
PSTN gateway when the Line 1 proxy is down
(registration failure or network link down).
Default setting: yes
Description
Polarity before a call is connected: Forward or Reverse.
Default setting: Forward
Polarity after an outbound call is connected: Forward or
Reverse.
Default setting: Forward.
Polarity after an inbound call is connected: Forward or
Reverse.
Default setting: Forward
Description
To enable this line for service, select yes. Otherwise,
select no.
Default setting: yes
4
125
- Quick Links:
- Connecting the Equipment
- Basic Setup
- Sip
Hide quick links:
Advertisement
Table of Contents
