Cisco SPA232D Administration Manual page 127
Mobility enhanced phone adapter
Hide thumbs
Also See for SPA232D:
- Provisioning manual (213 pages) ,
- Quick start manual (17 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
Configuring the Voice Settings
PSTN (LINE Port)
Cisco SPA232D Administration Guide
Field
Incoming Handset
List
Network Settings
Field
SIP ToS/DiffServ
Value
SIP CoS Value
RTP ToS/DiffServ
Value
RTP CoS Value
Network Jitter
Level
Jitter Buffer
Adjustment
Description
The devices that ring when an incoming call is received.
Default setting: fxs,1,2,3,4,5,6,7,8,9,10
Description
TOS/DiffServ field value in UDP IP packets carrying a SIP
message.
Default setting: 0x68
CoS value for SIP messages. Valid values are 1 through 7.
Default setting: 3
ToS/DiffServ field value in UDP IP packets carrying RTP
data.
Default setting: 0xb8
CoS value for RTP data. Valid values are 1 through 7.
Default setting: 6
Determines how jitter buffer size is adjusted by the ATA
device. Jitter buffer size is adjusted dynamically. The
minimum jitter buffer size is 30 milliseconds or (10
milliseconds + current RTP frame size), whichever is
larger, for all jitter level settings. However, the starting jitter
buffer size value is larger for higher jitter levels. This
setting controls the rate at which the jitter buffer size is
adjusted to reach the minimum. Select the appropriate
setting: low, medium, high, very high, or extremely high.
Default setting: low
Controls how the jitter buffer should be adjusted. Select
the appropriate setting: up and down, up only, down only,
or disable.
Default setting: yes
4
126
- Quick Links:
- Connecting the Equipment
- Basic Setup
- Sip
Hide quick links:
Advertisement
Table of Contents
