User 1 - Cisco SPA232D Administration Manual
Mobility enhanced phone adapter
Hide thumbs
Also See for SPA232D:
- Provisioning manual (213 pages) ,
- Quick start manual (17 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
Configuring the Voice Settings
User 1
User 1
Cisco SPA232D Administration Guide
Field
PSTN To SPA Gain
Ring Validation
Time
Ring Indication
Delay
Ring Timeout
Ring Threshold
Line-In-Use
Voltage
Use the Voice > User 1 page to set the user preferences for the calls through the
PHONE port1 .
To open this page: Click Voice on the menu bar, and then click User 1 in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Call Forward Settings
Field
Cfwd All Dest
Description
dB of digital gain (or attenuation if negative) to be applied
to the signal sent from the PSTN side to the ATA. The
range is -15 to 12.
Default setting: 0
The minimum signal duration required by the Gateway for
recognition as a ring signal.
Default setting: 256 ms
Choose from {0, 512, 768, 1024, 1280, 1536, 1792} (ms).
Default setting: 512ms
Choose from {0, 128, 256, 384, 512, 640, 768, 896, 1024,
1152, 1280, 1408, 1536, 1664, 1792, 1920} (ms).
Default setting: 640 ms
Choose from {13.5–16.5, 19.35–2.65, 40.5–49.5} (Vrms).
Default setting: 13.5-16.5 Vrms
The voltage threshold at which the ATA assumes the
PSTN is in use by another handset sharing the same line
(and will declare PSTN gateway service not available to
incoming VoIP callers).
Default setting: 30
Description
Forward number for Call Forward All Service.
Default setting: blank
4
147
- Quick Links:
- Connecting the Equipment
- Basic Setup
- Sip
Hide quick links:
Advertisement
Table of Contents
