Pstn User - Cisco SPA232D Administration Manual
Mobility enhanced phone adapter
Hide thumbs
Also See for SPA232D:
- Provisioning manual (213 pages) ,
- Quick start manual (17 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
Configuring the Voice Settings
PSTN User
PSTN User
Cisco SPA232D Administration Guide
Field
Cfwd Ring Splash
Len
Cblk Ring Splash
Len
VMWI Ring Policy
VMWI Ring Splash
Len
Ring On No New
VM
Use the Voice > PSTN User page to set the user preferences for calls through the
LINE port.
To open this page: Click Voice on the menu bar, and then click PSTN in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
Description
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
indicating the status of the subscriber's mail box. Three
settings are available.
Default setting: New VM Available
•
New VM Available: Ring as long as there new
voicemail messages.
•
New VM Becomes Available: Ring at the point when
the first new voicemail message is received.
•
New VM Arrives: Ring when the number of new
voicemail messages increases.
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s)
Default setting: 0
If enabled, the ATA plays a ring splash when the voicemail
server sends SIP NOTIFY message to the ATA indicating
that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
Default setting: no
4
152
- Quick Links:
- Connecting the Equipment
- Basic Setup
- Sip
Hide quick links:
Advertisement
Table of Contents
