Table of Contents
Advertisement
User's Guide
5. Shake the ink cartridge horizontally for 5 seconds, moving it back and forth about 10 cm 15 times.
6. Insert the cartridge into the printer until it clicks.
Note:
If Cartridge Check is displayed on the control panel, press the OK button to check if the cartridges are installed
correctly.
7. Close the front cover.
Note:
Put used ink cartridges in a plastic bag and dispose of them according to your local laws and regulations.
Related Information
"Ink Cartridge Codes" on page 56
&
"Ink Cartridge Handling Precautions" on page 56
&
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
The following is the code for the genuine Epson maintenance box.
T6712
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the
box will have solidified and no more ink can be absorbed.
Replacing Ink Cartridges and Other Consumables
59
Advertisement
Chapters
Table of Contents
