Troubleshooting - Bosch Rotak 32 Original Instruction
Hide thumbs
Also See for Rotak 32:
- Original instructions manual (261 pages) ,
- Operating instructions manual (86 pages) ,
- Original instructions manual (131 pages)
Table of Contents
Advertisement
OBJ_BUCH-1349-005.book Page 7 Wednesday, November 19, 2014 2:33 PM
Troubleshooting
TOP
Problem
Motor refuses to start
Machine functions
intermittently
Machine leaves ragged finish
and/or
Motor labours
Blade not rotating while garden
product switched on
Excessive vibrations/noise
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Possible clogging
Motor protector has activated
Mowing too low for the conditions
Extension cable damaged
Internal wiring of machine damaged
Motor protector has activated
Height of cut too low
Cutting blade blunt
Possible clogging
Blade fitted upside down
Cutting blade obstructed
Blade nut/bolt loose
Blade nut/bolt loose
Cutting blade damaged
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Allow motor to cool and increase height of cut
Increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective
gloves)
Tighten blade nut/bolt (17 Nm)
Tighten blade nut/bolt (17 Nm)
Replace the blade
F 016 L81 164 | (19.11.14)
English | 7
- Quick Links:
- Mounting and Operation
Hide quick links:
Advertisement
Table of Contents
