Table of Contents
Advertisement
Owner's Manual
Recordable disc
• We strongly recommend for good recording quality:
SONY DVD+RW 4x, MAXELL DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, TDK DVD+R 4x/8x/16x,
MAXELL DVD-RW 4x, MAXELL DVD-R 8x/16x
• Discs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+RW 4x
VERBATIM DVD-RW x
DVD Recorder with Video Cassette Recorder
POWER ON
STANDBY-ON
REW
Supplied Accessory
• Remote control
• RF cable
(NB550UD) with
two AAA batteries
If you need additional operating assistance after reading this owner's manual or
or visit our web site at http://www.funai-corp.com
Before you use this unit , you need to complete connections. Refer to
"Connections" on pages 14-16.
To record a program easily, refer to "Easy DVD recording" on pages 17-18 after
connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
VERBATIM DVD+R 8x
VERBATIM DVD-R 8x
F.FWD
STOP/EJECT
PLAY
RECORD
IR
• Audio/Video cables
(WPZ0901TM00)
(WPZ010TM015
or WPZ010LTE01)
Please read before using this equipment.
to order replacement accessories, please call
TOLL FREE : 1-800-605-8453
JVC DVD-RW 4x
MAXELL DVD-R 16x
CMWR20V6
OPEN/CLOSE
CHANNEL
D.DUBBING
VCR SOURCE DVD
STOP
PLAY
• Owner's Manual
(1VMN458)
Owner's Manual
RECORD
S-VIDEO
VIDEO
L
AUDIO
R
• Quick Guide
(1VMN459)
Advertisement
Table of Contents
Related Manuals for Magnavox cmwR20v6
Summary of Contents for Magnavox cmwR20v6
- Page 1 (You CANNOT record on any copyright protected DVD disc with this unit.) Note • Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. JVC DVD-RW 4x CMWR20V6 OPEN/CLOSE RECORD CHANNEL D.DUBBING •...
-
Page 2: Before You Start
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. . Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. - Page 4 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. •...
- Page 5 Maintenance SERVICING • Please refer to relevant topics on Troubleshooting on pages 77-80 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.
-
Page 6: Table Of Contents
Before you start ....2 Precautions ....... 2 Table of contents . -
Page 7: Features
This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record on DVD discs and edit them after that. The following features are offered with this unit. Recording DVD mode VCR mode This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. -
Page 8: Functional Overview
Front Panel POWER ON STANDBY-ON ( * ) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON button (DVD/VCR) Press to turn on and off the unit. 2. POWER ON indicator (DVD/VCR) Red LED lights up when power is on. 3. - Page 9 Functional overview (cont’d) Remote Control STANDBY-ON VIDEO/TV OPEN/CLOSE .@/: PQRS WXYZ CLEAR/C-RESET SPACE TITLE RETURN DISPLAY DISC MENU SETUP CHANNEL TIMER VCR REC DVD REC REC MODE TIMER SET SLOW CM SKIP RAPID PLAY SEARCH AUDIO DUBBING ( * ) In DVD mode, the unit can also be turned on by pressing these buttons.
-
Page 10: Installing Batteries In The Remote Control
Functional overview (cont’d) Installing batteries in the remote control Install two “AAA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: •... -
Page 11: Setup Menus
Functional overview (cont’d) Guide to Displays On Screen menu This unit uses the following On Screen menu for most operations: Setup menu and Title list, and Display menu. They allow you to change the playing status of the disc during play. The Display menu also gives you information on the status of the disc or a videotape. -
Page 12: Display Menu
Functional overview (cont’d) Display menu DVD mode First: Press [DISPLAY] to call up the Display menu. This menu will give you the information on the disc. Some operations are available while disc is inserted in the unit. 0:00:00 DVD+RW CH 8 Stereo HQ(1Hr) 1:01... -
Page 13: Display Message
Functional overview (cont’d) Front Panel Display Guide 1. Current Status of the unit :Appears when a disc or a videotape play is paused. :Appears when playing back a disc or a videotape. :Appears when the timer programming or OTR has been set and is proceeding. -
Page 14: Connections
Antenna Cable TV signal (Back of TV) Disconnect Choose one of the following connections, depending on the capabilities of the equipment you possess. Basic Audio AUDIO IN Audio cable (supplied) This unit <REAR PANEL> DVD/VCR IN - AUDIO - OUT DVD/VCR DIGITAL AUDIO S-VIDEO... -
Page 15: Connection To A Cable Box Or Satellite Box
INPUT, AUX VIDEO, VIDEO 1, VIDEO 2, VIDEO 3 Kenwood LXI-Series Magnavox AUX CHANNEL To set progressive scan mode, refer to page 71 • This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. -
Page 16: Connection To An Audio System
Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit IN - AUDIO - OUT <REAR PANEL>... -
Page 17: Getting Started
The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. -
Page 18: Finalizing A Disc
Easy DVD recording (cont’d) STANDBY-ON Step 5: Select the VIDEO/TV OPEN/CLOSE desired .@/: channel. STANDBY-ON VIDEO/TV OPEN/CLOSE PQRS WXYZ .@/: CLEAR/C-RESET SPACE TITLE RETURN DISPLAY PQRS WXYZ CLEAR/C-RESET SPACE TITLE DISC MENU SETUP RETURN DISPLAY DISC MENU SETUP CHANNEL TIMER VCR REC DVD REC REC MODE TIMER SET SLOW... -
Page 19: Initial Setting
Turn on this unit for the first time, you need to follow these steps. Press [STANDBY-ON Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 15. “Initial Setup” will automatically appear. -
Page 20: Adding/Deleting Channels
To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number. (For example: 117, press [1], [1], [7]) •... -
Page 21: Selecting The Tv Stereo Or Sap
Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. Notes on TV channel audio •... -
Page 22: Setting The Clock
Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 3. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct. -
Page 23: Manual Clock Setting
Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [OK]. Using [K / L], select “Clock Setting”. Press [OK]. Clock Setting menu will appear. Clock Setting VCR DVD ---- / -- / ---- ( ---- ) -- : -- -- Press [OK] again. -
Page 24: Setting The Daylight Saving Time
Setting the Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will automati- cally move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. “ON” has been selected as the default. -
Page 25: Recording
Information on DVD recording Information This unit can record to DVD+RW/DVD-RW/DVD+R/ DVD-R discs. DVD+R/DVD-R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased many times. These discs are formatted with DVD+VR mode automatically. Discs other than DVD+VR mode cannot be recorded in this unit. -
Page 26: Making Discs Playable In Other Dvd Player (Finalize/Make Edits Compatible)
Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-RW/DVD-R, you must finalize the disc in order to play on other units. (Refer to page 37.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 65) for playing on other units after editing. -
Page 27: Before Recording
Replacing disc menu DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R It can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units. -
Page 28: Basic Recording
DVD+R DVD+R DVD+RW DVD+RW DVD-RW DVD-RW DVD-R DVD-R Follow the steps below to record TV programs. Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A]. The disc tray will open. Insert your disc with its label fac- ing up. -
Page 29: One-Touch Timer Recording (Otr)
One-touch Timer Recording (OTR) DVD+R DVD+R DVD+RW DVD+RW DVD-RW DVD-RW DVD-R DVD-R This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby mode. -
Page 30: Timer Recording
DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming. - Page 31 Checking, canceling, or correcting the timer programming information Press [TIMER SET]. disappears from the front panel display. Press [TIMER]. Timer Programming list will appear. Timer Programming VCR DVD Date Start Mode 1. JAN/01 12:57AM 1:57AM Check the information on the list you will need.
-
Page 32: Hints For Timer Recording
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a recordable disc is not on the tray or an unrecordable disc is on the tray, DVD on the front panel display flashes and Timer Recording cannot be performed. -
Page 33: Overwriting An Existing Title
Overwriting an existing title Overwriting from the beginning of the title DVD+RW DVD+RW DVD-RW DVD-RW You can overwrite the existing title from the beginning. Press [STANDBY-ON Make sure that the TV input is set on the unit. Press: Load the disc that includes a title to be overwritten. -
Page 34: Hints For Overwriting
Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A... -
Page 35: Settings For An External Source
Settings for an external source Connection to an external source DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Connect the external source properly to the unit by using input jacks either EXT (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. -
Page 36: Recording From An External Source
Settings for an external source (cont’d) Recording from an external source DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW Before recording from an external source, see the instructions for the connection on page 35. 1. Turn on the TV and press [STANDBY-ON the input of the TV to which the unit is connected. -
Page 37: Playing The Discs In Other Dvd Players
Playing the discs in other DVD players Finalizing a disc DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You will need to finalize discs to play in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. -
Page 38: Auto Finalizing
Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space. -
Page 39: Dubbing Mode
DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be possible only if the DVD disc or the videotape is not copy protected. - Page 40 VCR to DVD Using [K / L], select “VCR DVD”. Press [OK]. Dubbing Mode VCR DVD DVD VCR Press [SETUP] to exit. Press: Make sure to select a recording mode using [REC MODE]. Press: Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording.
-
Page 41: Playing Discs
Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit. -
Page 42: Basic Playback
Playback DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A]. The disc tray will open. Insert your disc with its label fac- ing up. -
Page 43: Playing Mp3 Disc
Video Video DVD-RW DVD-RW DVD-R DVD-R DVD-V DVD-V DVD-V DVD-V Video CD Video CD Press [STANDBY-ON Turn the TV on and be sure to select the input to which the unit is connected. Press: Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. -
Page 44: Playing Discs Using The Disc Menu
Playing discs using the disc menu DVD-V DVD-V DVD-V DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. -
Page 45: Special Playback
Resume play DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R You can resume play from where you stopped playing the disc last. During playback, press [STOP C]. The resume message will appear. Resume ON Press [PLAY B]. -
Page 46: Rapid Play
Rapid play DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Rapid play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback. -
Page 47: Zoom
Zoom DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Video CD Video CD During playback, press [DISPLAY]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [OK]. Zoom menu will appear. 0:00:00 DVD-Video There are four options... -
Page 48: Search
Title/Chapter search DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Using [SKIP H / G] During playback, press [SKIP G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. •... -
Page 49: Track Search
Track search Video CD Video CD Using [SKIP H / G] During playback, press [SKIP G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [SKIP H]. Press it repeatedly to go to the previous track. -
Page 50: Repeat/Random/Program Playback
Repeat/Random/Program playback Repeat playback DVD+RW DVD+RW DVD+R DVD+R DVD-V DVD-V DVD-V DVD-V Video Video DVD-RW DVD-RW DVD-R DVD-R During playback, press [DISPLAY]. Display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [OK]. Repeat menu will appear. <DVD-Video>... -
Page 51: Program Playback
Repeat/Random/Program playback (cont’d) Program playback Video CD Video CD You can program the disc to play in your desired order. First: Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [OK]. CD Playback Mode menu will appear. Using [K / L], select “Program Play”. -
Page 52: Switching Audio Soundtrack
Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-V DVD-V Video CD Video CD When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during playback. When playing Audio CDs or Video CDs you can switch between stereo, just the left channel or just... -
Page 53: Switching Camera Angles
Selecting the format of audio and video (cont’d) Switching camera angles DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes. -
Page 54: Editing
Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. Press [TITLE]. NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 P l a y... -
Page 55: Editing Discs
Deleting titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to recorded will be increased. -
Page 56: Putting Names On Titles
Putting names on titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list. First: Follow steps 1 to 3 on page 55 to display the Edit menu. -
Page 57: Setting Chapter Marks
Setting chapter marks DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. First: Follow steps 1 to 3 on page 55 to display the Edit menu. -
Page 58: Clearing Chapter Marks
Clearing chapter marks DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R First: Follow steps 1 to 3 on page 55 to display the Edit menu. Using [K / L], select “Chapter Mark”. Press [OK]. Option window will appear as illustrated step 2 on page 57. Using [SKIP H / G], select a chapter mark to be deleted. -
Page 59: Hiding Chapters
Hiding chapters DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can hide chapters from the title list. Hidden chapters are skipped during playback. First: Follow steps 1 to 3 on page 55 to display the Edit menu. Using [K / L]] , select “Current Chapter”. -
Page 60: Setting Pictures For Thumbnails
Setting pictures for thumbnails DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. -
Page 61: Dividing A Title
Dividing a title DVD+RW DVD+RW DVD-RW DVD-RW You can divide one title into two new titles. First: Follow steps 1 to 3 on page 55 to display the Edit menu. Using [K / L], select “Title Dividing”. Press [PLAY B] and then [PAUSE F] to decide the point at which you will divide the title. -
Page 62: Editing Discs (Setup Menu)
Putting name on disc DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put title names on the titles and change the names from this menu. Press [STOP C] if you are playing a disc. First: Press [SETUP]. Using [K / L], select “Disc Edit”. Press [OK]. -
Page 63: Setting Or Releasing Disc Protect
Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R To prevent accidental editing, or erasing the titles, you can protect them. Setting disc to protect First: Follow steps 1 to 2 on page 62 to display the Disc Edit menu. - Page 64 Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont'd) Releasing disc from protect First: Follow steps 1 to 2 on page 62 to display the Disc Edit menu. <DVD+RW> Disc Edit Edit Disc Name Disc Protect ON Erase Disc Make Edits Compatible <DVD+R/DVD-R>...
-
Page 65: Erasing Disc
Editing discs (Setup menu) (cont’d) Erasing disc Video DVD+RW DVD+RW DVD-RW DVD-RW DVD-RW DVD-RW You can erase all titles on a disc. If you want to record on DVD-RW formatted with other than DVD+VR mode, erase all contents on the disc and format it. -
Page 66: Changing The Setup Menu
Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 67-68 Audio Language Subtitle Language 2.Display setting OSD Language... -
Page 67: Language Setting
Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. Using [K / L], select “Language”. Press [OK]. Language menu will appear. Using [K / L], desired item. Press [OK]. Disc Menu Language (Default : English) Set the language for Disc Menu. -
Page 68: Display Setting
Changing the Setup menu If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Display”. Press [OK]. Display menu will appear. -
Page 69: Audio Setting
Changing the Setup menu Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. Display OSD Language English Angle Icon Screen Saver 10 minutes FL Dimmer (Default : Bright) Set the brightness of front panel display. You can choose one among “Auto”, “Bright”... - Page 70 Changing the Setup menu Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Digital Out - PCM Your setting will be activated. 48kHz 48kHz 96kHz 96kHz Settings for Dolby Digital (Default : Stream) •...
-
Page 71: Video Setting
Changing the Setup menu Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. Press [SETUP]. -
Page 72: Settings For Parental Lock Level
Changing the Setup menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. -
Page 73: Settings For Pbc (Playback Control)
Changing the Setup menu Settings for Parental lock level (cont’d) Press [SETUP] to exit. Note • Press [CLEAR/C-RESET] to erase numbers entered incorrectly. • When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using the Number buttons in Password Input window. -
Page 74: Vcr Functions
Playback Press [STANDBY-ON ] on the remote control or the front panel of the unit. When you are playing a videotape, turn the TV on and be sure to select the input to which the unit is connected. Press: Insert a prerecorded videotape. Press [PLAY B] to begin playback. -
Page 75: One-Touch Timer Recording (Otr)
Recording and One-touch Timer Recording (cont’d) One-touch Timer Recording (OTR) This feature allows you to set the recording length simply by pressing [VCR REC I] on the remote control or [RECORD I] (VCR) on the front panel of the unit. During normal recording, press [VCR REC I] to begin One- touch Timer Recording. -
Page 76: Time Search
Time search This feature allows you to go to a specific point on a videotape by entering the exact amount of time you wish to skip in order to reach the point. First: Press [SEARCH] repeatedly so that the TIME SEARCH menu appears. -
Page 77: Others
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance. Symptom The power does not turn on. There is no picture. - Page 78 Symptom There is no picture. Picture noise appears. There is no sound. Sound is noisy. No DTS sound is output. The unit does not play back the disc. Playback image freezes for a second. The disc does not start playback from the beginning.
- Page 79 Symptom “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.
-
Page 80: Rf Output Switch
Error message Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Recording Error You cannot record on this disc as Power Calibration Area is full. -
Page 81: Glossary
Analog audio An electrical signal that directly repre- sents sound. In contrast, digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. -
Page 82: Frequently Asked Questions
Frequently Asked Questions –– Can I record on CD-RW/R? No, this unit records only DVDs. –– Can I play back DVD-Video that is bought in another country? Possible only if the region code of the disc is 1 and ALL. ––... - Page 83 MEMO...
-
Page 84: Limited Warranty
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. -
Page 85: Dvd Recording
CM SKIP RAPID PLAY SEARCH AUDIO DUBBING Connections (Back of TV) DVD Recorder with Video Cassette Recorder CMWR20V6 Connect cable (supplied) Logo I You can use either A/V or RF cables to connect to TV for operation. 2 – Press [STANDBY-ON 1. - Page 86 CM SKIP RAPID PLAY SEARCH AUDIO DUBBING 1 Raccordements (Arrière du téléviseur) Enregistreur DVD avec magnétoscope CMWR20V6 Câble RF Logo I Vous pouvez utiliser des câbles A/V ou RF pour raccorder l’appareil à votre téléviseur. 2 2 – Appuyez sur [STANDBY-ON pour mettre l’appareil...