Vaddio wallview hd-20 dvi/hdmi high definition robotic ptz camera featuring the quick-connect™ dvi/hdmi sr interface and the conceal™ wall mounting system (20 pages)
Vaddio wallview ccu hd-20 high definition ptz camera featuring the quick-connect ccu interface with the ezim ccu slot card and the conceal wall mounting system (20 pages)
Page 2
ZoomSHOT 20 QUSB Camera System Inside Front Cover - Unintentionally Blank ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 2 of 42...
Basic Application Diagrams ..................................9 Diagram: Basic Wiring Configuration - Without Network or PC ......................9 Diagram: Basic ZoomSHOT 20 QUSB System Configuration - USB 2.0 Streaming ..............10 Diagram: Basic IP Configuration - IP Streaming ..........................10 Diagram: Complex System with Audio ............................11 ...
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website.
HSDS (differential) video from the camera over Cat-5/5e/6 cable up to distance of 150’ (45.72m). 3) ZoomSHOT 20 DIP Switch Settings: Settings for IR remote frequency, IR receiver on/off, image flip and defaults can be configured on these switches. See the Switch Settings page for additional information. The dip...
IP address (static or DHCP) is listed on the bottom line. This display with IP and MAC addresses allows for easy access to the embedded web server and Vaddio camera settings for the PC or BYOD (bring your own device - laptop or tablet) users of UC conference systems.
All UP ALL DOWN (with power cycle) RS-232 IN (Color Coded Grey): Serial RS-232 input on a RJ-45 connector. This control port allows a Vaddio joystick controller or 3 party controller (Crestron/AMX) to control the camera functions if the embedded webserver is not used for real time control.
HD Monitor (Simulated HD Video Feed) ProductionVIEW Precision Camera Controller Note: RS-232 can be run directly to the ZoomSHOT or through the Quick-Connect USB in this configuration ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 9 of 42...
USB 2.0 Cable Network HDMI or DVI-D Ethernet Network Diagram: Basic IP Configuration - IP Streaming ZoomSHOT 20 HD Camera to Quick-Connect USB out to Network for a remote network application. Quick-Connect USB ZoomSHOT 20 Interface HD Camera PC with (45.72)
The Thin Profile Wall Mount for the ZoomSHOT 20 can be mounted directly to a 1-gang wall box or can be mounted using two (2) provided spiral dry wall anchors.
Step 5: Connect the Vaddio 24 VDC, 2.0 Amp power supply to a power outlet and to the Quick-Connect USB Interface. The Quick-Connect USB will initialize, power will travel down the EZ-POWER VIDEO Cat. 5 cable to the camera.
Linux Evolving Compatibilities: As more UC soft-client and lecture capture programs are released and gain popularity, Vaddio will provide a continuing research and development effort to ensure the compatibility with other manufacturer’s products. ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A...
Camera Control page. Defaults: Username is blank (assigned by admin) Password is: password Admin name is: admin Password is: password ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 14 of 42...
1) Zoom and Home Controls: The camera’s zoom lens can be controlled with the “+” to zoom-in and the “-“ to zoom-out the ZoomSHOT 20 camera. The home button will move the camera to the home zoom position. 2) Zoom Speed Control: The speed for both the Zoom control can be adjusted with the Zoom Speed Slider. For tighter shots, it is recommended that the slower speed is used.
5) CCU Scenes: The user has access to the CCU scenes set and stored by the Admin. There are three (3) user definable presets and six (6) presets preconfigured by the technical folks at Vaddio (really Scott set them all) that are meant to be used in certain lighting scenarios.
Page 17
5) Custom CCU Scene Labels: The labels for the (3) User Defined customizable Scenes can be changed as needed. Mouse the cursor into the appropriate window and edit the text. Press Save to store these changes or press Cancel to exit this window. ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 17 of 42...
Streaming URL auto populates and that path can be changed. When finished setting up the streaming parameters click Save to put the changes into effect or cancel, which will not save the configuration. ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 18 of 42...
QC-USB basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save. ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 19 of 42...
If Static IP is used, the IP Address, Subnet Mask and Gateway are manually entered. Click on Save to keep the Static IP information. IP Address, Subnet Mask and Gateway are entered into the system manually for Static IP ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 20 of 42...
“admin” password at any given time. If changes are made, click on Save to store the change. Screen Shot: Admin Menu - Diagnostics Diagnostics menu button will display a set of self-diagnostics. These diagnostics may help the Vaddio technical support team diagnose a problem with the Quick-Connect USB and attached camera.
After clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed. Please contact Vaddio Tech support for assistance with updates. Please read and completely understand the pop-up warnings as it is easy to lose patience waiting for updates. Click on continue to start the update (this example is from 1.0.0 to 1.1.0).
Screen Shot: Admin Menu - HELP Service/Help information can be found under the Help menu. Support phone numbers and e-mail, manuals, FAQ’s and System information is listed on this page. Have this page open when calling Vaddio Tech Support. TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling Vaddio for technical support.
HOICE The Quick-Connect USB and attached camera are compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the QC-USB with a Vaddio camera and get an image. Skype Example: 1) After connecting a camera to the Quick-Connect USB, with a quality USB 2.0...
HD video from the camera RS-232 RJ-45 Jack (RS-232 Communication) HD Video Select 16-Position Rotary Switch: Used to set the ZoomSHOT 20 HD Video Resolution Output Camera Settings 6-Position Dip Switch: For IR Frequency, IR ON/OFF and Image Flip Thin Profile Wall Mount...
Vaddio ClearVIEW HD-20 , PowerVIEW HD-22 and HD-30 The Vaddio IR Shot Commander is also compatible with the Sony® EVI series and the BRC series PTZ cameras. Image: Vaddio IR SHOT Commander Hand-held IR remote (Top View) ZOOM OUT...
Page 27
RETURN< SSNR OFF / LOW /MED / HIGH Noise Reduction - Don’t use above Low SENS-UP OFF - Do not Use RETURN< Return to Main Menu ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 27 of 42...
Page 28
COMPONENT ON / OFF Do not change this parameter RETURN< Do not change resolutions here - Use the Rotary Switch on the back of the camera RESET EXIT ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 28 of 42...
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.
Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair.
PB - 12345678 Important Note: The EZ-POWER VIDEO RJ-45 Connector on a Vaddio CAT-5 system camera is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick- Connect USB and USB Mini Interfaces ONLY (568B Wiring Standard). The video signals are differential (HSDS) and can only be processed by the interfaces above.
8) TXD (to RXD of control source) NOTE: The Vaddio ZoomSHOT 20 control protocol is similar to, but not identical to the Sony® VISCA™ command set in order to be compatible with several popular control devices. Not all VISCA commands are supported and there are ZoomSHOT 20 specific commands in the following Command and Inquiry Lists.
ICR Off 8x 01 04 01 03 FF ICR Off - Cut Filter In *Zoom and Focus Data: CAM_Zoom: Range(0x000–0x071A) CAM_Focus: Range (0x0ed-0x0944) dependent on Zoom Position ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 34 of 42...
ExpComp Pos CAM_ICRModeInq 8x 09 04 01 FF y0 50 02 FF On - ICR filter Out y0 50 03 FF Off – ICR filter In ZoomSHOT 20 QUSB System - Document Number 342-0964 Rev A Page 35 of 42...
ELNET ERIAL OMMAND The Vaddio Serial Command protocol is a high level text based command line interface supported via telnet session on the Quick-Connect USB. Camera control commands supported on the Quick-Connect USB includes the RoboSHOT series, ClearVIEW HD-20 , PowerVIEW HD-22 and HD-30, ZoomSHOT 20 and WideSHOT. The command application protocol interface is intended to allow external device such as AMX or Crestron to control the camera.
Page 37
Stops the zoom movement of the camera Camera NAME camera - Base command for camera control command. Used in conjunction with control arguments to include home, pan, tilt, zoom, and preset. ZoomSHOT 20 QUSB Camera Document Number 342-0964 Rev A Page 37 of 42...
Page 38
Attempt to send 5 ICMP ECHO_REQUESTs with data size 56 to the host at 192.168.1.1 network ping count 10 size 100 192.168.1.1 Attempt to send 10 ICMP ECHO_REQUESTs with data size of 100 to the host at 192.168.1.1 ZoomSHOT 20 QUSB System Document Number 342-0964 Rev A Page 38 of 42...
Page 39
Set the current streaming mode to Ethernet EXAMPLES streaming mode get mode: usb Returns the current streaming mode streaming mode usb ---- streaming mode ethernet Sets the streaming mode to Ethernet ZoomSHOT 20 QUSB System Document Number 342-0964 Rev A Page 39 of 42...
Page 40
Sets the streaming mode to Ethernet ---- streaming quality standard Sets the streaming quality to standard ---- streaming resolution 720p Sets the streaming resolution to 720p ZoomSHOT 20 QUSB System Document Number 342-0964 Rev A Page 40 of 42...
Page 41
- display the system version information SYNOPSIS version DESCRIPTION Display an overview of the command line syntax EXAMPLES Version Returns the current software version ZoomSHOT 20 QUSB System Document Number 342-0964 Rev A Page 41 of 42...