Server features
The design of the 200 takes advantage of advancements
in data storage and memory management. The server
combines:
v Impressive performance using an innovative approach to
microprocessor utilization
The server comes with one Celeron
microprocessor installed.
v Large system memory
The memory bus in the server supports up to 1.5
gigabytes (GB) of system memory. The memory
controller provides error code correction (ECC) support
for up to three industry-standard PC133, 3.3 V, 168-pin,
133 megahertz (MHz), unregistered, synchronous
dynamic random access memory (SDRAM) dual in-line
memory modules (DIMMs).
v Systems-management capabilities
See the documentation provided with the
systems-management software for more information.
v Integrated network environment support
The server comes with an Ethernet controller on the
system board. This Ethernet controller has an interface
for connecting to 10-Mbps or 100-Mbps networks. The
server automatically selects between 10BASE-T and
100BASE-TX environments. The controller provides
full-duplex (FDX) capability, which allows simultaneous
transmission and reception of data on the Ethernet local
area network (LAN).
v IBM ServerGuide
The ServerGuide CDs included with IBM servers provide
programs to help set up the server and install the
network operating system (NOS). The ServerGuide
program detects the hardware options installed, and
provides the correct configuration program and device
drivers. In addition, the ServerGuide CDs include a
variety of application programs for the server.
Note: The latest level of BIOS for the server is also
available through the World Wide Web. Refer to
"Recovering BIOS" on page 18 for the
appropriate World Wide Web addresses.
™
CDs
Chapter 2. General information
®
or Pentium
®
III
5