Removing The Bezel - IBM xSeries 200 Hardware Maintenance Manual
Hide thumbs
Also See for xSeries 200:
- Hardware maintenance manual (148 pages) ,
- Hardware maintenance manual (122 pages)
Table of Contents
Advertisement
Removing the bezel
The following illustration shows how to remove the bezel
from the server.
Note: The illustrations in this document might differ slightly
from your hardware.
Complete the following steps to remove the bezel:
1. Review the information in "Before you begin" on page
44.
2. Turn off the server and peripheral devices and
disconnect all external cables and power cords.
3. Remove the side cover (see "Removing the side cover"
on page 46).
4. Press the bezel-release latch at the top of the server to
disconnect the top of the bezel from the server.
5. Release the two tabs at the top edge of the bezel and
pull the top of the bezel slightly away from the server.
6. Pull the bezel up to release the two tabs at the bottom
edge of the bezel. Store the bezel in a safe place.
48
Hardware Maintenance Manual: xSeries 200
Advertisement
Table of Contents
Troubleshooting
