Table of Contents
Advertisement
DINION Housing Kit
5
Installation
Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
Caution!
These units must be properly and securely mounted to a supporting structure capable of
!
sustaining the unit weight. Use care when selecting mounts or pan/tilts (not supplied) for
installation; the mounting surface and unit's weight should be carefully considered.
5.1
Opening the cover
Caution!
The heater will be hot when in operation.
!
Do not touch! Always ensure that the heater is off and cool before working on the camera.
Open the cover by unlatching the three latches (1) on the side of the housing. If the optional
tamper-resistant screws have been installed, use the supplied wrench to remove the screws
before opening the latches.
Bosch Security Systems
Installation Manual
Installation | en
11
2014.11 | 1.0 | F.01U.309.609
Advertisement
Table of Contents
