Table of Contents
Advertisement
DINION Housing Kit
6.
7.
8.
9.
10. If the camera is correctly focused, briefly press the Menu button to exit the wizard.
7.3
Configuring analog camera kits
Connect a service monitor to the Video connector on the back of the camera. Check that you
can view the camera picture, and make the following manual adjustments:
1.
2.
Backlight adjustment
The camera normally provides an optimal picture without the need for further adjustments,
however to optimize picture sharpness in both bright and low-level lighting, use the camera's
unique Lens Wizard for back focus. This ensures that the object of interest always remains in
focus, even when focusing at the maximum lens iris opening (for example, at night).
Note: Always adjust to obtain a sharp picture in both wide-angle and tele positions for both far
and near focus.
To adjust back focus:
1.
Bosch Security Systems
Manually adjust the focal length lever on the lens to obtain the required field of view.
Manually adjust the focus lever on the lens to obtain the sharpest image possible.
Briefly press Menu to start the automatic back focus adjustment (AUTO BACK FOCUS).
–
The motorized automatic back focus process runs.
–
The progress is shown on the monitor.
If the camera is not in focus, press Menu for a longer time to restart the wizard.
–
The back focus position is stored.
–
The iris is set to its original value.
Turn the focal length lever on the lens to obtain the required field of view.
Turn the focus lever on the lens to obtain the sharpest image possible.
Open the slide door panel at the side of the camera.
NBN-MCSMB
(optional)
Zoom
Focus
(T <—> W)
(∞ <—> N)
Installation Manual
Configuration and final assembly | en
2014.11 | 1.0 | F.01U.309.609
21
Advertisement
Table of Contents
