Mitsubishi Lancer Owner's Manual page 110
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
l
When the ignition switch is switched from
"ACC" or "LOCK" to "ON", the mode set-
ting is automatically switched from manual
to auto.
Switching to auto occurs automatically. If
switching to manual mode is done, however,
the data from the last reset is displayed.
Auto reset mode
l
When the average fuel consumption is being
displayed, if you hold down the multi-infor-
mation meter switch, the average fuel con-
sumption displayed at that time is reset.
l
If the ignition switch is at "ACC" or
"LOCK" for about 4 hours or longer, the aver-
age fuel consumption display is automatical-
ly reset.
NOTE
l
The average speed display and the average
fuel consumption display can be reset individ-
ually for the auto reset mode and manual re-
set mode.
l
"---" is displayed when the average fuel con-
sumption cannot be measured.
l
The initial (default) setting is "Auto reset
mode".
l
The average fuel consumption depends on
the driving condition (road condition, driving
behavior, etc.). The displayed fuel consump-
tion may vary from the actual fuel consump-
tion. Treat the fuel consumption displayed as
just a rough guideline.
l
The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display is erased if the battery is discon-
nected.
l
The display setting can be changed to the pre-
ferred units {km/L, mpg (US), mpg (UK) or
L/100 km}.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
Momentary fuel consumption display
E00521800443
While driving, this displays the momentary fuel con-
sumption, using a bar graph.
Type 1
Type 2
When the momentary fuel consumption surpasses
the average fuel consumption, the momentary fuel
consumption is displayed with a green bar graph.
(Type 2)
OG1E12E1
Instruments and controls
Be conscious of maintaining the momentary fuel
consumption above the average fuel consumption,
it can help you drive with the better fuel consump-
tion.
NOTE
l
When the momentary fuel consumption can-
not be measured, the bar graph is not dis-
played.
l
The display setting can be changed to the pre-
ferred units {km/L, mpg (US), mpg (UK) or
L/100 km}.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
l
It is possible to cancel the green bar graph.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
Function setting screen
E00521900112
The "Display language", "Temperature
unit", "Fuel consumption unit", and
"Average fuel consumption and speed re-
set method" etc. settings can be modi-
fied as desired.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on
page 3-17 for further details.
3
3-13
Hide quick links:
Advertisement
Chapters
Table of Contents
