Mitsubishi Lancer Owner's Manual page 118
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
l
If "---" is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
Changing the language cooperative control*
E00523300543
The language used in MITSUBISHI Multi-Commu-
nication System (MMCS) (if so equipped) or the
®
Bluetooth
2.0 interface (if so equipped) can be
changed automatically to the same language as that
shown in the multi-information display.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
2. Lightly press the multi-information meter
switch to select " " (language cooperative
control).
Type 1
Type 2
3. Press and hold the multi-information meter
switch to switch in sequence from A or 1 (lan-
guage cooperation enabled) → M, 2 or P (lan-
guage cooperation disabled) → A or 1 (lan-
guage cooperation enabled).
The setting is changed to the selected condi-
tion.
NOTE
l
The memory of the language cooperative con-
trol is erased if the battery is disconnected,
and it returns automatically to A or 1 (lan-
guage cooperation enabled).
l
The language display modified with the lan-
guage setting can be switched in the follow-
ing manner.
• When A or 1 (language cooperation ena-
bled) has been selected with the language
cooperative control, the language for
MITSUBISHI
Multi-Communication
System (MMCS) (if so equipped) or the
®
Bluetooth
2.0 interface (if so equipped)
is automatically changed to the language
selected for the multi-information display.
• When M, 2 or P (language cooperation dis-
abled) has been selected with the lan-
guage cooperative control, the language
for MITSUBISHI Multi-Communication
System (MMCS) (if so equipped) or the
®
Bluetooth
2.0 interface (if so equipped)
is not automatically changed to the lan-
guage selected for the multi-information
display.
Operation sound setting
E00523400502
You can turn off the operation sounds of the multi-
information meter switch and daytime dipper button.
OG1E12E1
Instruments and controls
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-17.
2. Lightly press the multi-information meter
switch to select " " (operation sound setting).
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
in sequence from ON (operation sound on)
→ OFF (operation sound off) → ON (opera-
tion sound on).
The setting is changed to the selected condi-
tion.
3
3-21
Hide quick links:
Advertisement
Chapters
Table of Contents
