Steering Wheel Lock - Mitsubishi Lancer Owner's Manual
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
For vehicles with an A/T, CVT or Twin Clutch
SST, when removing the key, first set the selector
lever (A/T or CVT) or gearshift lever (Twin Clutch
SST) to the "P" (PARK) position, and then turn the
key to the "LOCK" position and remove it.
CAUTION
l
Do not remove the ignition key from the
ignition switch while driving. The steer-
ing wheel will be locked, causing loss of
control.
l
If the engine is stopped while driving, the
brake servomechanism will cease to func-
tion and braking efficiency will deterio-
rate. Also, the power steering system will
not function and it will require greater
manual effort to operate the steering.
l
Do not leave the key in the "ON" position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
CAUTION
l
Do not turn the key to the "START" posi-
tion when the engine is running, doing so
could damage the starter motor.
OG1E12E1
Starting and driving
Steering wheel lock
E00601500360
[For vehicles equipped with keyless operation
system]
For information on operations for vehicles equip-
ped with keyless operation system, refer to "Key-
less operation system: steering wheel lock" on pa-
ges 1-14, 1-19.
[Except vehicles equipped with keyless opera-
tion system]
To lock
Remove the key at the "LOCK" position.
Turn the steering wheel until it is locked.
To unlock
Turn the key to the "ACC" position while moving
the steering wheel slightly right and left.
4
4-15
Hide quick links:
Advertisement
Chapters
Table of Contents
