Warning Display - Mitsubishi Lancer Owner's Manual
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Starting and driving
Manual shift display
In manual shift, the currently selected gear is dis-
played on the multi-information display.
through
Warning display
4
or
When the
warning display or the
play appear on the information screen in the multi-
information display while you are driving, take the
following measures.
When
warning display is showing
The temperature of the Twin Clutch SST fluid is
high.
If this occurs, take one of the following measures.
l
Reduce the vehicle speed.
l
Stop the vehicle in a safe place, place the gear-
shift lever in the "P" (PARK) position, and
then open the bonnet with the engine running
to cool the engine.
4-44
After a while, check that the
E00623500168
has gone out. If the display goes out, the vehicle
can be driven normally. If the warning display re-
mains on or comes on frequently, have the vehicle
checked by a MITSUBISHI MOTORS Authorized
Service Point.
CAUTION
l
If the
warning display is shown, such
as when the vehicle does not accelerate
while traveling even if the accelerator ped-
al is depressed, the vehicle may not be
able to be driven normally.
For safety, pay attention to your surround-
ings when driving the vehicle.
NOTE
E00626700187
l
If the vehicle is continuously driven on hilly
roads or in a sporty manner, the vehicle may
vibrate.
This vibration is to alert the driver that the
Twin Clutch SST fluid temperature has ris-
en. It does not indicate a malfunction.
warning dis-
If this occurs, perform the same measures for
when the
warning appears. If the vibration
stops, the vehicle can be driven normally.
If the vehicle is driven with
If the vehicle continues to be driven after the
E00626800058
warning display and "SLOW DOWN" appear, and
the temperature of the Twin Clutch SST oil contin-
ues to rise, the transmission protection control may
operate and cause the transmission to function as if
the gearshift lever was in the "N" (NEUTRAL) po-
sition.
OG1E12E1
(At this time, the vehicle can temporarily not be
warning display
driven.)
If this occurs, take the following measures:
1. Depress the brake pedal and stop the vehicle
in a safe place.
2. Place the gearshift lever in the "P" (PARK)
position, and then open the bonnet with the
engine running to cool the engine.
3. After a while, check that the
play has gone out, and then stop the engine if
the
warning display has gone out.
4. If the engine can be restarted, the vehicle can
be driven normally.
If the warning display remains on or comes on fre-
quently,
have
the
MITSUBISHI MOTORS Authorized Service Point.
When
warning display is showing
A safety device in the Twin Clutch SST has been
activated due to a possible malfunction in the Twin
Clutch SST or in the engine electronic control mod-
ule.
If this occurs, perform the following procedure.
1. Park your vehicle in a safe place and stop the
engine.
2. Restart the engine.
If the
warning display goes out, there is no ab-
warning displayed
normal condition.
However, if the warning display remains on or
comes on frequently, have the vehicle checked by a
MITSUBISHI MOTORS Authorized Service Point
as soon as possible.
warning dis-
vehicle
checked
by
a
E00626900020
Hide quick links:
Advertisement
Chapters
Table of Contents
