When
warning display is showing
The temperature of the Twin Clutch SST fluid is
high.
Refer to "Warning display" on page 4-44 and fol-
low the appropriate measures.
When the check engine warning lamp comes on
or blinking
There could be a malfunction in the engine electron-
ic control module.
Refer to "Check engine warning lamp" on page
3-39 and follow the appropriate measures.
When the gearshift lever position display is not
showing
A safety device in the Twin Clutch SST has been
activated due to a possible malfunction in the Twin
Clutch SST.
Refer to "When the gearshift lever position display
is not showing" on page 4-39 and follow the appro-
priate measures.
When
warning display is showing or when no
warning is showing in the multi-information dis-
play
A safety device in the Twin Clutch SST has been
activated due to a possible malfunction in the Twin
Clutch SST or in the engine electronic control mod-
ule.
Perform the following procedure.
1. Park your vehicle in a safe place and stop the
engine.
2. Restart the engine.
If the vehicle moves and accelerates normally after
this procedure is performed, there is no malfunction.
However, if the vehicle does not move or acceler-
ate normally, or if this problem occurs repeatedly,
have the vehicle checked by a MITSUBISHI
MOTORS Authorized Service Point as soon as pos-
sible.
CAUTION
l
When the Twin Clutch SST fluid temper-
ature is high, the engine idle speed when
the vehicle is stopped may increase or the
vehicle will have a weak tendency to creep.
After that, if the Twin Clutch SST fluid
temperature rises even higher, the
warning display will appear.
OG1E12E1
Starting and driving
ACD (Active centre differential
system)*
E00611400043
The ACD is a system that improves acceleration per-
formance and straight-ahead stability by regulating
the differential limiting action and power drive dis-
tribution of the centre differential.
CAUTION
l
Do not over-rely on the ACD. Even the
ACD cannot prevent the natural laws of
physics from acting on the vehicle. This
system, like any other system, has limits
and cannot help you to maintain traction
and control of the vehicle in all circum-
stances. Reckless driving may lead to acci-
dents. It is the driver's responsibility to
drive carefully. This means taking into ac-
count the traffic, road and environmental
conditions.
l
Be sure to use tyres that are the same speci-
fied size, type, and brand, and have no dif-
ference in the amount of wear for all four
wheels. Otherwise, the ACD may not
work properly.
NOTE
l
If the parking brake lever is pulled up while
the vehicle is moving, the centre differential
is designed to switch to a free state condition
which will allow the rear wheel to lock easier.
ACD control mode
E00625000053
Select the control mode from the following three
types to suit the driving conditions.
4
4-47