Acd Warning Display - Mitsubishi Lancer Owner's Manual
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Starting and driving
ACD control mode
Operation
Normally, use this control
TARMAC
mode. Use this mode for
paved roads.
Use this control mode when
driving on somewhat slip-
GRAVEL
pery road surfaces, such as
wet road surfaces and gravel
roads.
Use this control mode when
driving on slippery road sur-
SNOW
faces, such as snow-covered
roads.
ACD control mode switch
When the ignition switch is set to the "ON" posi-
tion, operate the AWC switch to change the control
4
mode.
Each time the switch is pushed, the control mode
changes in the order "TARMAC" → "GRAVEL"
→ "SNOW" → "TARMAC".
4-48
NOTE
l
The control mode can be changed while the
vehicle is moving.
l
The selected control mode is stored in memo-
ry even if the engine is stopped.
However, if a battery terminal is disconnec-
ted, the control mode stored in memory will
be erased and the control mode will be set to
the "TARMAC" mode.
ACD control mode display
E00625100070
Example: "TARMAC" mode is selected.
The currently selected control mode is displayed
on the multi-information display.
In addition, when the control mode is changed, the
selected mode appears on the interrupt display
screen of the information screen in the multi-infor-
mation display.
The control mode display will appear on the infor-
mation screen for a few seconds, and then the origi-
nal screen will return.
OG1E12E1
CAUTION
l
The ACD control mode display may flash
under aggressive driving conditions.
At this time, ACD control is temporarily
suspended in order to protect the ACD de-
vice, but this will not affect normal driving.
After the vehicle is driven for a while, if
the ACD control mode display remains
on, the ACD control will start operating
again.
E00625200097
ACD warning display
When there is a malfunction in the system, the
warning display will appear on the information
screen in the multi-information display.
In addition, the ACD control mode display in sec-
tion (A) will go out at the same time.
E00625300098
Hide quick links:
Advertisement
Chapters
Table of Contents
