Mitsubishi Lancer Owner's Manual page 226
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
• When the rear of the vehicle is weighed
down with the weight of passengers and
luggage in the vehicle.
A- Actual objects
B- Objects shown on the screen
• When there is an upward slope at the back.
A- Actual objects
B- Objects shown on the screen
l
The reference lines for distance and vehicle
width are intended to indicate the distance to
a flat object such as a level, flat road surface.
This may make the distance to a projecting
object shown on the screen differ from the ac-
tual distance to the projecting object. Do not
use them as a guide for distances to solid ob-
jects.
Example: On the screen the point B appears
the nearest, then the point C and A in order
of distance. The points A and B actually are
the same distances from the vehicle, and the
point C is farther off than the points A and B.
Check surroundings for safety.
OG1E12E1
Starting and driving
To change the indication on the screen
of the inside rear-view mirror
E00631300080
It is possible to turn off the screen of the inside rear-
view mirror and change the language of the warn-
ing messages on the screen.
To temporarily set the non- display mode
If you press the switch (1) while the image appears
on the display, it goes off temporarily.
To return to the display mode, press the switch
again or turn the ignition switch to the "ON" posi-
tion after turning to the "LOCK" or "ACC" position.
To permanently set the non- display mode
1. Turn the ignition switch to the "ON" position.
CAUTION
l
For safety reasons, do not perform follow-
ing operations with the engine running.
2. Put the gearshift lever or the selector lever in
the "R" position.
4
4-73
Hide quick links:
Advertisement
Chapters
Table of Contents
