Cargo Loads - Mitsubishi Lancer Owner's Manual
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Starting and driving
3. Press and hold down the switch (1) (for
about 15 seconds).
While you keep the switch pressed, the or-
ange indicator (2) comes on. When the im-
age goes off, the non-display mode setting is
completed.
To change the language of warning text(3)
1. Turn the ignition switch to the "ON" position.
CAUTION
l
For safety reasons, do not perform follow-
ing operations with the engine running.
2. Put the gearshift lever or the selector lever in
the "R" position.
4
3. Press and hold down the switch (1) to enter
language selection mode (for 6 to 11 seconds).
In this mode, the image appears and the
green indicator (2) comes on.
4. Press the switch until the desired language ap-
pears on the display.
Each time you press the switch, the language
will change to the next one. When the warn-
ing text flashes, setting is completed.
4-74
Cargo loads
Cargo loads precautions
CAUTION
l
Do not load cargo or luggage higher than
E00630500027
the top of the seatback. Be sure that your
cargo or luggage cannot move once your
vehicle is moving.
Having the driver's vision blocked, and
your cargo being thrown inside the cabin
if you suddenly have to brake can cause a
serious accident or injury.
l
Load heavy cargo or luggage in the front
of the vehicle. If the load in the back of
the vehicle is too heavy, steering may be-
come unstable.
Loading a roof carrier
CAUTION
l
Use a roof carrier that properly fits your
vehicle.
Do not load luggage directly onto the roof.
For installation, refer to the instruction
manual accompanying the roof carrier.
OG1E12E1
NOTE
l
We recommend you to use a genuine
E00609901149
MITSUBISHI roof carrier, since the brackets
to be used have a special shape.
For details, we recommend you to consult a
MITSUBISHI MOTORS Authorized Service
Point.
Roof carrier mounting brackets*
When installing the roof carrier, use the brackets (A).
The brackets (A) are located under each cover (B).
Hide quick links:
Advertisement
Chapters
Table of Contents
