Mitsubishi Lancer Owner's Manual page 28
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Operation of the Dead Lock System
E00310500015
In a vehicle that has a Dead Lock System, it is pos-
sible to set the Dead Lock System using the remote
controller. (Refer to "Dead Lock System" on page
1-28.)
Operation of the outside rear-view mir-
rors (Vehicles equipped with mirror re-
tractor switch)
E00310800092
To fold
Within 30 seconds of locking the doors using the
LOCK switch (1), press the LOCK switch twice rap-
idly to fold the door mirrors.
To extend
Within 30 seconds of unlocking the doors using the
UNLOCK switch (2), press the UNLOCK switch
twice rapidly to return the door mirrors to their ex-
tended positions.
The outside rear-view mirrors are not initially set
to work as described above. If you want them to
work as described above, you need to set them so
that they do not retract/extend when the doors are
locked/unlocked using the keyless entry system.
Refer to "Starting and driving: Outside rear-view
mirrors" on page 4-12.
For details, please consult a MITSUBISHI
MOTORS Authorized Service Point.
In a vehicle equipped with the MITSUBISHI Mul-
ti-Communication System (MMCS), it is possible
to change the setting by means of screen operations.
Refer to the separate owner's manual for details.
NOTE
l
The keyless entry system does not operate in
the following conditions:
• The key is left in the key cylinder.
• The door is open.
l
The remote control switch will operate with-
in approximately 4 m from the vehicle. How-
ever, the operating range of the remote con-
trol switch may change if the vehicle is loca-
ted near a power station, or radio/TV broad-
casting station.
l
If either of the following problems occurs,
the battery may be exhausted.
• The remote control switch is operated at
the correct distance from the vehicle, but
the doors are not locked/unlocked in re-
sponse.
• The trunk lid cannot be opened.
• The indication lamp (4) is dim or does
not come on.
For further information, please contact
your MITSUBISHI MOTORS Author-
ized Service Point.
If you replace the battery yourself, refer
to "Procedure for replacing the remote
control switch battery" on page 1-06.
l
If you wish to add a remote control switch,
please contact your MITSUBISHI MOTORS
Authorized Service Point.
A maximum of 8 remote control switches are
available for your vehicle.
l
If your remote control switch is lost or dam-
aged, please contact your MITSUBISHI
MOTORS Authorized Service Point for a re-
placement remote control switch.
OG1E12E1
Locking and unlocking
Setting of door unlock function (vehi-
cles equipped with the central door
lock switch)
E00310300026
The door unlock function can be set to the follow-
ing two conditions.
Each time the door unlock function is set, a chime
will sound to tell you the condition of the door un-
lock function.
Number of
Condition
chimes
One chime
All doors unlock
Two chimes
Driver's door unlock only
1. Remove the key from the ignition switch.
2. Place the combination headlamps and dipper
switch in the "OFF" position, and leave the
driver's door open.
3. Press the LOCK switch (1) for 4 to 10 sec-
onds and press the UNLOCK switch (2) dur-
ing this time.
4. Release in sequence the LOCK and UN-
LOCK switches within 10 seconds of press-
ing the LOCK switch in step 3.
NOTE
l
On vehicles equipped with Mitsubishi Multi-
Communication System (MMCS), screen op-
erations can be used to make the adjustment.
Refer to the separate owner's manual for de-
tails.
1
1-05
Hide quick links:
Advertisement
Chapters
Table of Contents
