Mitsubishi Lancer Owner's Manual page 29
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Locking and unlocking
Procedure for replacing the remote
control switch battery
1. Before replacing the battery, remove static
electricity from your body by touching a met-
al grounded object.
2. Remove the screw (A) from the remote con-
trol switch.
1
3. With the MITSUBISHI mark facing you, in-
sert the cloth-covered tip of a straight blade
(or minus) screwdriver into the notch in the
remote control switch case and use it to open
the case.
1-06
NOTE
l
Be sure to perform the procedure with the
MITSUBISHI mark facing you. If the
E00309500174
MITSUBISHI mark is not facing you when
you open the remote control switch case, the
switches may come out.
4. Remove the remote control transmitter from
the remote control switch case. Then, open
the remote control transmitter using the meth-
od described in step 3.
5. Remove the old battery.
OG1E12E1
6. Install a new battery with the + side (B) down.
+ side
- side
Coin type battery
CR1616
7. Close the remote control transmitter firmly.
8. Place the remote control transmitter in the re-
mote control switch case, then securely close
the remote control switch case.
9. Attach the screw (A) removed in step 2.
10. Check the keyless entry system to see that it
works.
NOTE
l
You may purchase a replacement battery at
an electric appliance store.
l
A MITSUBISHI MOTORS Authorized Serv-
ice Point can replace the battery for you if
you prefer.
CAUTION
l
When the remote control switch case is
opened, be careful to keep water, dust,
etc. out. Also, do not touch the internal
components.
Hide quick links:
Advertisement
Chapters
Table of Contents
