Towing - Mitsubishi Lancer Owner's Manual
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
To install
1. Make sure the tabs (A) of the back of the
wheel cover are not broken and correctly fit-
ted on the rings (B). If in doubt, do not in-
stall the wheel cover and consult your
MITSUBISHI MOTORS Authorized Service
Point.
2. Align the air valve (C) of the tyre with the
notch (D) in the wheel cover.
NOTE
l
Full wheel covers have a symbol mark (E)
provided on the reverse side to show the air
valve location.
Before installing the wheel cover to the
wheel, make sure that the opening with the
symbol mark is correctly aligned with the air
valve.
3. Push the bottom part (F) of the wheel cover
into the wheel.
4. Gently push both sides (G) of the wheel cov-
er and hold them in place with both knees.
5. Gently tap around the circumference of the
wheel cover at the top (H), then push the
wheel cover into place.
OG1E12E1
For emergencies
Towing
E00801503709
If your vehicle needs to be towed
If towing is necessary, we recommend you to have
it done by your MITSUBISHI MOTORS Author-
ized Service Point or a commercial tow truck service.
In the following cases, transport the vehicle using a
tow truck.
l
The engine runs but the vehicle does not
move or abnormal noise is produced.
l
Inspection of the vehicle's underside reveals
that oil or some other fluid is leaking.
If a wheel gets stuck in a ditch, do not try to tow
the vehicle. Please contact your MITSUBISHI
MOTORS Authorized Service Point or a commer-
cial tow truck service for assistance.
Only when you cannot receive a towing service
from a MITSUBISHI MOTORS Authorized Serv-
ice Point or commercial tow truck service, tow
your vehicle carefully in accordance with the in-
structions given in "Emergency towing" in this part.
6
6-19
Hide quick links:
Advertisement
Chapters
Table of Contents
