For emergencies
CAUTION
l
When the vehicle with A/T, CVT or Twin
Clutch SST is to be towed by another ve-
hicle with the all wheels on the ground,
make sure that the towing speed and dis-
tance given below are never exceeded,
causing damage to the transmission.
Vehicles with A/T
Towing speed: 20 km/h (12 mph)
Towing distance: 30 km (19 miles)
Vehicles with CVT or Twin Clutch SST
Towing speed: 20 km/h (12 mph)
Towing distance: 40 km (25 miles)
For the towing speed and the towing dis-
tance, follow the local driving laws and
regulations.
9. When finished towing, remove the towing
hook, and stow it in the specified location.
Refer to "Tools, jack and tyre repair kit" on
page 6-06.
6
When installing the cover, align the hook
with the cut out area on the vehicle, and firm-
ly insert.
If your vehicle tows another vehicle
1. Take out the towing hook, wheel nut wrench
and jack bar.
Refer to "Tools, jack and tyre repair kit" on
page 6-06.
6-26
2. Cover the tip of the jack bar with a cloth,
then use it to remove the cover (D) that is lo-
cated on the rear bumper.
3. Use the wheel nut wrench (E) to firmly at-
tach the towing hook (F).
4. Always attach the tow rope to the towing
hook. Otherwise, the instructions are the
same as for "When being towed by another
vehicle".
OG1E12E1
5. When finished towing, remove the towing
hook, and stow it in the specified location.
Refer to "Tools, jack and tyre repair kit" on
page 6-06.
When installing the cover, align the hook
with the cut out area on the vehicle, and firm-
ly insert.
NOTE
l
Do not tow a vehicle heavier than your own
vehicle.