Mitsubishi Lancer Owner's Manual page 394
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
CAUTION
l
Handle halogen lamp bulbs with care.
The gas inside halogen lamp bulbs is high-
ly pressurized, so dropping, knocking, or
scratching a halogen lamp bulb can cause
it to shatter.
l
Never hold the halogen lamp bulb with a
bare hand, dirty glove, etc. The oil from
your hand could cause the bulb to break
the next time the headlamps are operated.
If the glass surface is dirty, it must be
cleaned with alcohol, paint thinner, etc.,
and refit it after drying it thoroughly.
Headlamps (high-beam, except for ve-
hicles with high intensity discharge
headlamps)
E01009400151
1. When replacing the bulb on the right side of
the vehicle, remove the bolt (A) holding
down the washer tank spout and move the
spout towards the rear of the vehicle.
*: Front of the vehicle
2. Turn the cap (B) anticlockwise to remove it.
*: Front of the vehicle
OG1E12E1
Maintenance
3. Turn the bulb (C) anticlockwise to remove it.
*: Front of the vehicle
4. While pressing the tab (D), pull out the bulb
(E).
5. To install the bulb, perform the removal
steps in reverse.
8-29
8
Hide quick links:
Advertisement
Chapters
Table of Contents
