Mitsubishi Lancer Owner's Manual page 396
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
4. While pressing the tab (D), pull out the bulb
(E).
5. To install the bulb, perform the removal
steps in reverse.
CAUTION
l
Handle halogen lamp bulbs with care.
The gas inside halogen lamp bulbs is high-
ly pressurized, so dropping, knocking, or
scratching a halogen lamp bulb can cause
it to shatter.
l
Never hold the halogen lamp bulb with a
bare hand, dirty glove, etc.
The oil from your hand could cause the
bulb to break the next time the bending
lamps (Adaptive Front lighting System
(AFS)) are operated.
If the glass surface is dirty, it must be
cleaned with alcohol, paint thinner, etc.,
and refit it after drying it thoroughly.
Position lamps (except for vehicles
with high intensity discharge head-
lamps)
E01003701162
1. When replacing the bulb on the right side of
the vehicle in case of diesel-powered vehi-
cles, turn the steering wheel to the left to cre-
ate enough work space. And then, remove
OG1E12E1
Maintenance
the clips (A) and screws (B) to turn up the
cover (C).
2. Turn the socket (D) anticlockwise to remove
it.
*: Front of the vehicle
8-31
8
Hide quick links:
Advertisement
Chapters
Table of Contents
