Mitsubishi Lancer Owner's Manual page 401

Table of Contents

Handle halogen lamp bulbs with care.

The gas inside halogen lamp bulbs is high-

ly pressurized, so dropping, knocking, or

scratching a halogen lamp bulb can cause

it to shatter.

Never hold the halogen lamp bulb with a

bare hand, dirty glove, etc.

The oil from your hand could cause the

bulb to break the next time the fog lamps

are operated.

If the glass surface is dirty, it must be

cleaned with alcohol, paint thinner, etc.,

and refit it after drying it thoroughly.

6. To install the bulb, perform the removal

steps in reverse.

When mounting the cover, align the hook (F)

on the cover with the hole in the body.

Rear combination lamps

E01004200981

Stop and tail lamps and rear turn-signal lamps

1. Remove the screws (A) from the lamp unit.

2. Remove the lamp unit in the rear direction.

3. Remove the socket and bulb assemblies by

turning them anticlockwise.

Show Quick Links

Chapters

Table of Contents