Licence Plate Lamps; Front Room & Map Lamps - Mitsubishi Lancer Owner's Manual

Table of Contents

Licence plate lamps

1. Remove the screws (A) from the licence

plate lamp lens (B). Then, remove the lens

and gasket (C), and withdraw the bulb.

2. Remove the socket and bulb assemblies by

turning it anticlockwise.

3. Remove the bulb by pulling it out.

E01004600594

4. To install the bulb, perform the removal

steps in reverse.

Front room & map lamps*

When replacing the bulb, put the front room & map

lamps switch into the "OFF" position.

1. Insert a straight blade (or minus) screwdriver

with a cloth over its tip into the notch of the

lamp assembly. Gently pry to remove the lens.

2. While holding down the tab (A), pull out the

3. To install the bulb, perform the removal

steps in reverse.

E01009500019

When mounting the lens, align the tab (B) to

the hole on the vehicle body.

Show Quick Links

Table of Contents