Trunk Room Lamp; Rear Room Lamp - Mitsubishi Lancer Owner's Manual

Table of Contents

E01004900249

When replacing the bulb, put the rear room lamp

switch into the "OFF" position.

1. Insert a straight blade (or minus) screwdriver

with a cloth over its tip into the notch of the

lamp assembly and pry gently to remove the

2. While holding down the tab (A), pull out the

3. To install the bulb, perform the removal

steps in reverse.

When mounting the lens, align the tabs (B)

with the holes on the vehicle body.

Trunk room lamp

E01007300026

1. Pull both clips (A) away from the centre as

shown and remove the lamp unit. Then re-

move the bulb by pulling it out.

2. To install the bulb, perform the removal

steps in reverse.

Show Quick Links

Table of Contents