Mitsubishi Lancer Owner's Manual page 43
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Locking and unlocking
CAUTION
l
Never attempt to start the engine by push-
ing or pulling the vehicle.
l
Do not run the engine at high rpm or
drive the vehicle at high speed until the en-
gine has had a chance to warm up.
l
Release the emergency key as soon as the
1
engine starts to avoid damaging the start-
er motor.
Starting the engine (petrol-powered vehicles)
The starting procedure is as follows:
1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal (M/T).
NOTE
l
On vehicles with the Auto Stop & Go
(AS&G) system, the starter will not operate
unless the clutch pedal is fully depressed
(Clutch interlock).
5. On vehicles with M/T, place the gearshift lev-
er in the "N" (Neutral) position.
On vehicles with A/T, CVT or Twin Clutch
SST, make sure the selector lever (A/T or
1-20
CVT) or gearshift lever (Twin Clutch SST)
is in the "P" (PARK) position.
Vehicles with M/T
Vehicles with A/T
or CVT
E00307800519
NOTE
l
On vehicles with A/T or CVT, the starter
will not operate unless the selector lever is in
the "P" (PARK) or "N" (NEUTRAL) position.
On vehicles with Twin Clutch SST, the start-
er will not operate unless the gearshift lever
is in the "P" (PARK) position or the gear-
shift lever is in the "N" (NEUTRAL) posi-
tion with the brake pedal depressed.
For safety reasons, start the engine in the "P"
(PARK) position so that the wheels are locked.
OG1E12E1
6. While pushing the lock release button (A), re-
move the cover of the ignition switch.
Vehicles with Twin
Clutch SST
7. Insert the emergency key into the ignition
switch.
Hide quick links:
Advertisement
Chapters
Table of Contents
