free hit counter

Mitsubishi Lancer Owner's Manual page 44

Hide thumbs Also See for Lancer:
Table of Contents

Advertisement

8. Insert the keyless operation key into the emer-
gency key.
9. After turning the emergency key with the key-
less operation key to the "ON" position,
make sure that all warning lamps are function-
ing properly before starting the engine.
10. Turn the emergency key with the keyless op-
eration key to the "START" position without
depressing the accelerator pedal, and release
it when the engine starts.
NOTE
l
Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.
11. Remove the keyless operation key from the
emergency key.
WARNING
l
Make sure to remove the keyless opera-
tion key from the emergency key after
the engine is started.
If not removed, the keyless operation key
could fall to the floor, which could dis-
turb the pedal operation.
Furthermore, the keyless operation key
could prevent the driver's knee airbag (if
so equipped) from inflating normally or
could be propelled to cause serious injury
if the airbag inflates.
NOTE
l
If the emergency key is attached to a key hold-
er, it may become impossible to insert the key-
less operation key into the emergency key,
and it may prevent the engine from being star-
ted. When using the emergency key to start
the engine, first remove the key from the key
ring.
Starting the engine (diesel-powered vehicles)
E00308800095
1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal.
NOTE
l
On vehicles with the Auto Stop & Go
(AS&G) system, the starter will not operate
unless the clutch pedal is fully depressed
(Clutch interlock).
OG1E12E1
Locking and unlocking
5. Place the gearshift lever in the "N" (Neutral)
position.
6. While pushing the lock release button (A), re-
move the cover of the ignition switch.
1-21
1

Advertisement

Table of Contents
loading

Table of Contents

Save PDF