Mitsubishi Lancer Owner's Manual page 45
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Locking and unlocking
7. Insert the emergency key into the ignition
switch.
1
8. Insert the keyless operation key into the emer-
gency key.
9. Turn the emergency key with keyless opera-
tion key to the "ON" position. The diesel pre-
heat indication lamp will first illuminate, and
then after a short time go out, indicating that
preheating is completed.
1-22
NOTE
l
If the engine is cold, the diesel preheat indi-
cation lamp is on for a longer time.
l
When the engine has not been started within
about 5 seconds after the diesel preheat indi-
cation lamp went out, return the ignition key
to the "LOCK" position. Then, turn the emer-
gency key to the "ON" position to preheat
the engine again.
l
When the engine is warm, the diesel preheat
indication lamp does not come on even if the
emergency key is placed in the "ON" position.
Start the engine by turning the emergency
key right to the "START" position.
10. Turn the emergency key with the keyless op-
eration key to the "START" position without
depressing the accelerator pedal, and release
it when the engine starts.
NOTE
l
Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.
11. Remove the keyless operation key from the
emergency key.
OG1E12E1
WARNING
l
Make sure to remove the keyless opera-
tion key from the emergency key after
the engine is started.
If not removed, the keyless operation key
could fall to the floor, which could dis-
turb the pedal operation.
Furthermore, the keyless operation key
could prevent the driver's knee airbag
from inflating normally or could be pro-
pelled to cause serious injury if the air-
bag inflates.
NOTE
l
If the emergency key is attached to a key hold-
er, it may become impossible to insert the key-
less operation key into the emergency key,
and it may prevent the engine from being star-
ted. When using the emergency key to start
the engine, first remove the key from the key
ring.
Using the MIVEC engine
The MIVEC engine automatically controls valve
timing in accordance with driving conditions for
maximum engine performance.
NOTE
l
To protect the engine, the high-speed mode
may not be selected while the engine coolant
temperature is low.
Keyless entry system
E00307700619
Press the remote control switch to lock or unlock
the doors and to open the trunk lid.
Hide quick links:
Advertisement
Chapters
Table of Contents
