Mitsubishi Lancer Owner's Manual page 59
Hide thumbs
Also See for Lancer:
- Owner's manual (671 pages) ,
- Owner's manual (700 pages) ,
- Owner's handbook manual (16 pages)
Table of Contents
Advertisement
Locking and unlocking
NOTE
l
The security alarm system can be activated
when people are riding inside the vehicle or
when the windows are open. To prevent acci-
dental activation of the alarm, do not set the
system to the system armed mode while peo-
ple are riding in the vehicle.
l
Avoid leaving valuable items inside the vehi-
1
cle even when the security alarm system has
been set to the "active" mode.
To deactivate the vehicle inclination detection
function and the interior intrusion detection func-
tion
The vehicle inclination detection function and the
interior intrusion detection function can be deacti-
vated when parking in automated car parks, when
leaving pets in the vehicle or when leaving the ve-
hicle with the windows slightly open.
1. Turn the ignition switch to the "LOCK" posi-
tion. If you started the engine with the key,
remove the key from the ignition switch.
1-36
2. Raise and hold the wiper and washer switch
to the "MIST" position for approximately 3
seconds. The buzzer will sound once and the
function will be deactivated.
To activate the function again, raise and hold
the wiper and washer switch to the "MIST"
position for approximately 3 seconds.
The buzzer will sound twice and the function
will be activated.
E00312100129
NOTE
l
The function will be activated again if the fol-
lowing operation is performed.
• Unlock the doors using the keyless entry
system or the keyless operation function.
• Turn the ignition switch to the "ON" or
"ACC" position.
Cancelling the system
The following methods can be used to cancel the
system when it is in the system preparation mode
or the system armed mode.
l
Pressing the UNLOCK switch on the remote
control switch.
OG1E12E1
l
Turning the ignition switch to the "ON" posi-
tion.
l
Opening any one of the doors or inserting the
key into the ignition switch when the system
is in the system preparation mode.
l
Hold the keyless operation key and press a
switch on the driver's door or front passen-
ger's door to unlock the doors (vehicles with
the keyless operation system).
NOTE
l
If the bonnet or the trunk lid is opened dur-
ing the system preparation condition, the sys-
tem preparation condition is suspended.
The system returns to the preparation condi-
tion when the bonnet and the trunk lid are
closed.
l
If the battery terminals are disconnected
while the system is in the system preparation
mode, the memory will be erased.
l
It is possible to register up to 8 remote con-
trol switches for the keyless entry system
and 4 remote control switches for the keyless
operation system.
As long as they are registered, any of the re-
mote control switches, other than the one
used to activate the system, can be used to
cancel the system.
If you want to register additional remote con-
trol switches, please contact a MITSUBISHI
MOTORS Authorized Service Point.
E00301800504
Hide quick links:
Advertisement
Chapters
Table of Contents
