Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita HR2475
Summary of Contents for Makita HR2475
- Page 1 INSTRUCTION MANUAL Combination Hammer HR2475 010154 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model HR2475 Concrete 24 mm Core bit 54 mm Capacities Diamond core bit (dry type) 65 mm Steel 13 mm Wood 32 mm No load speed (min 0 - 1,100 Blows per minute 0 - 4,500... -
Page 3: General Power Tool Safety Warnings
Makita Corporation responsible Electrical safety manufacturer declare that the following Makita Power tool plugs must match the outlet. Never machine(s): modify the plug in any way. Do not use any Designation of Machine: adapter plugs with earthed (grounded) power Combination Hammer tools. - Page 4 13. Remove any adjusting key or wrench before parts. This will ensure that the safety of the power turning the power tool on. A wrench or a key left tool is maintained. attached to a rotating part of the power tool may 25.
-
Page 5: Functional Description
13. Do not touch the bit or parts close to the bit immediately after operation; they may be CAUTION: extremely hot and could burn your skin. Always check the direction of rotation before • 14. Some material contains chemicals which may operation. -
Page 6: Torque Limiter
between the protrusions on the tool barrel. Then tighten the grip by turning clockwise at the desired position. It For chipping, scaling or demolition operations, depress may be swung 360° so as to be secured at any position. the lock button and rotate the action mode changing knob to the symbol. -
Page 7: Operation
Bit angle (when chipping, scaling or Dust cup demolishing) 1. Dust cup 1. Action mode changing knob 2. Lock button 001300 010164 Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling The bit can be secured at the desired angle. -
Page 8: Maintenance
"Installing or removing drill bit" described on the If you need any assistance for more details regarding previous page. these accessories, ask your local Makita Service Center. Set the action mode changing knob to the symbol. SDS Plus Carbide-tipped bits You can drill up to 13 mm diameter in metal and up to 32 •... - Page 9 Scraper • Bit grease • Side grip • Depth gauge • Blow-out bulb • Dust cup • Dust extractor attachment • Drill chuck assembly • Chuck adapter • Keyless drill chuck • Drill chuck S13 • Chuck key S13 • Safety goggle •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884902A222...