Overview
The CA-FB70 HD Camera Adaptor is a
camera adaptor that can be attached to
the HXC-D70 HD Color Camera or
PMW-500/350/320 Solid-State Memory
Camcorder. By connecting to the
HXCU-FB70 HD Camera Control Unit
(CCU) via an optical fiber cable, high-
quality video signals can be transmitted
over a long distance between the
adaptor and CCU.
Can be installed on the following
camera/camcorder
• HXC-D70 series
1)
• PMW-500 series
2)
• PMW-350 series
2)
• PMW-320 series
1) An optional CBK-HD02 SDI/
COMPOSITE Input and 50 Pin Interface
is required.
2) An optional CBK-CE01 50 Pin Interface
and Digital Extender is required.
Features
Cable-free connection to camera/
camcorder
The adaptor can be installed on the
attachment shoe of a camera/
camcorder, allowing for connection of
input and output signals or power
supplies via the 50 pin interface and
BATT interface. As no cables are
necessary for attachment, the adaptor
offers a solution for solid camera-
system configuration.
Long distance transmission via
optical fiber cable
• To connect the HXCU-FB70 HD
Camera Control Unit to the adaptor,
either a single-mode optical fiber
cable or optical composite cable can
be used.
• When you use an optical composite
cable to supply power to the adaptor
and camera/camcorder from the
HXCU-FB70 HD Camera Control
Unit, the connection distance can be
extended up to 250 m (820 ft)
When you use a single-mode optical
fiber cable and mains to supply power
to the adaptor and camera/
camcorder, the connection distance
can be extended up to 10 km (32,800
2)
ft)
.
• While the HXCU-FB70 HD Camera
Control Unit and HXCE-FB70 Power
Supply Unit are connected by a
single-mode optical fiber cable (up to
2)
10 km (32,800 ft))
the adaptor and HXCE-FB70 with an
optical composite cable to supply
power (up to 250 m (820 ft))
adaptor offers flexibility to configure
the camera system to suit your usage
environment.
1)
.
, you can connect
1)
. The
Overview / Features
33