Starting The System; Setting The System Format - Sony CA-FB70 Operating Instructions Manual

Hd camera adaptor

Table of Contents

Available languages

Note

When the PMW-500/350/320 Solid-State Memory Camcorder is connected, the

microphone input settings for the intercom headset will be fixed at the following

(factory default) values:

Dynamic / -60dB / Unbalanced

For information on connection to an intercom system and configuration of the

settings, contact your Sony dealer.

Starting the System

1 Attach the adaptor to the camera/camcorder, then connect the adaptor to the CCU

using an optical composite cable.

2 Set the POWER switch of the adaptor and camera/camcorder to ON, then set the

POWER switch of the CCU to ON. Power will be supplied to the adaptor from the

CCU and the adaptor turns on. The adaptor then supplies power to the camera/

camcorder, which turns on.

While the system is starting up, the POWER lamp (green) blinks at 0.5 Hz. When the

communication for certification between the adaptor and camera/camcorder

completes, the POWER lamp (green) lights.

Note

When the POWER switch of the connected camera/camcorder is set to OFF, or when

the camera/camcorder does not start normally, the POWER lamp (green) keeps

blinking at 0.5 Hz.

To record/output with the system, it is necessary to set the video format for the

camera/camcorder, adaptor and CCU.

The adaptor supports the following video formats.

• 1920×1080/59.94i

• 1280×720/59.94P

• 1920×1080/50i

• 1280×720/50P

The video format setting of the adaptor is synchronized with that of the CCU.

Preparation and Setting

Table of Contents

Show Quick Links

Table of Contents