Content Information on this user manual .........24 Liability .................24 Designated Use ..............24 General Notes ...............25 Service | Importer ..............26 Signal Words .................27 Safety Guide .................28 Additional Guidelines for Bluetooth devices .......30 Packing contents ..............31 Getting started ..............32 Specifications................34 Charging the device ..............35 Setting up a connection ............35 Connecting via Bluetooth .............36 Connecting through NFC .............36...
In such cases any claim under the guarantee is null and void! Designated Use The BoomStar BT NFC X is a bluetooth speaker with NFC-function. This product also serves as hand-free device or can be used as powerbank to charge smartphones.
WArNINg Do not connect charging input and power bank output together! The designated use is defined by the instruction manual and in following the appliance and the warnings mentioned in this user manual. general Notes All mentioned company and product names are registered trademarks under the rights of their owners.
Internet www.lived-non-food.de Signal Words DANgEr High risk! Disregard of this regulation may result in danger to life or physical condition. WArNINg Medium risk! Disregard of this regulation may cause material damage. CAUTIoN Low or no risk! Facts to follow for the designated use of this product.
Safety guide Please read the safety guide before using the product. This information is for your safety and the protection of the device and devices connected. You will also find specific safety instructions in the following chapters of this user manual. DANgEr High risk for children and other groups of people! Inappropriate handling may lead to injuries or material damage.
Page 8
Faulty electrical installation or too high mains voltage can lead to an electrical shock. For charging, use a suitable USB-plug only. This device should only be opened and/or repaired by an expert or a person who is qualified to do so. Only original spare parts may be used. If you have any doubts on the function or further questions, please contact your local dealer or our service center.
DANgEr Danger of hearing damage! To avoid hearing damage, do not listen to music at maximum volume for a long period of time. CAUTIoN Follow all safety instructions in this user’s guide and the user guides of the connected devices. Additional guidelines for Bluetooth devices DANgEr The short wave radio frequency signals of a Bluetooth device may...
Page 12
Hands-free function Volume - On-/Off-Switch Volume + Bluetooth button Microphone USB / Emergency Power Bank plug AUX-IN 3.5 mm Mini USB charging connector Speaker USB cable 3.5 mm AUX cable...
Specifications Connection class Bluetooth 3.0 , NFC Frequency 2.4 – 2.48 GHz Range 5 – 10 m (depending on the connected device) Powerbank OUT 5 V / 300 mAh BT-Profile A2DP, HFP, HSP Power output 1.25 W Frequency response 150 Hz – 20 KHz S/N Ratio ≥...
This refreshes the battery. Setting up a connection The BoomStar BT NFC X can connect via bluetooth and can be used as an external loudspeaker. When using a mobile phone, the BoomStar BT NFC X can be used as a...
Connecting via Bluetooth Switch on the BoomStar BT NFC X (3). The bluetooth switch (5) blinks red. Switch on your bluetooth device, which you would like to connect to, and activate the bluetooth function. Your bluetooth device will now show other bluetooth devices nearby.
• The BoomStar BT NFC X will now play the music from the smartphone/tablet. Hands-free function • When the BoomStar BT NFC X is connected to a mobile phone via bluetooth, calls can be taken and the BoomStar BT NFC X can be used as a hands-free device.
Connecting the device via cable • It is also possible to connect the BoomStar BT NFC X to a sound source via cable. • Connect the headphone output of the required sound source (mobile phone, tablet PC) via the provided AUX-cable to the AUX-in connector (8).
Interference from other devices Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. In such a case, perform the following: Use the system at least 10 m away from the wireless LAN device.
vicinity of the product. Considering the large number of different types of varnishes and polishes used for furniture, it is possible that the device's feet will leave visible residue on the furniture as a result of a chemical reaction. The product should therefore not be placed on the surfaces of furniture without suitable protection.
The device will not • Is the battery charged? switch on. • Check your connection and charging cables. The BoomStar BT NFC X • Make sure that you have the newest update on is not recognized by my your Bluetooth device.
Disposal Electrical- and electronic devices must never be disposed of in the regular household waste! Consumers are legally obligated and responsible for the proper disposal of electronic and electrical devices by returning them to collecting sites designated for the recycling of electrical and electronic equipment waste.
Page 22
lived non food gmbH, all rights reserved. No liability will be taken for modifications or mistakes regarding the technical data or product features described in this user manual. All rights reserved. Any reproduction, transfer, duplication or filing of this user manual or parts of it, as well as the translation into a foreign language or computer language is prohibited without the explicit approval of the manufacturer.
Page 23
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. The N™ Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.