Brother DCP-9042CDN User Manual page 72
Hide thumbs
Also See for DCP-9042CDN:
- Quick setup manual (31 pages) ,
- Service manual (450 pages) ,
- User manual (191 pages)
Table of Contents
Advertisement
Error Message
Cause
Low Temperature The temperature of the machine
is too cold.
The belt unit is not installed.
No Belt Unit
The drum unit is not installed.
No Drum Unit
The machine is out of paper or
No Paper
paper is not properly loaded in the
paper tray.
The paper tray is not completely
No Tray
closed.
The waste toner box is not
No Waste Toner
installed.
The machine's memory is full.
Out of Memory
Print Unable XX The machine has a mechanical
problem.
64
Action
Increase room temperature to allow the machine
to operate.
Install the belt unit. (See Replacing the belt unit
on page 108.)
Install the drum unit. (See Replacing the drum
unit on page 101.)
Do one of the following:
Refill the paper in the paper tray or MP tray.
Remove the paper and load it again.
Close the paper tray properly.
Install the waste toner box. (See Replacing the
waste toner box on page 113.)
Copy operation in progress
Do one of the following:
Press Mono Start or Colour Start to copy
the scanned pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See Out of
memory message on page 30.)
Print operation in process
Reduce print resolution. (See Advanced tab in
the Software User's Guide on the CD-ROM.)
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try to print, copy or scan again.
Advertisement
Table of Contents
