Troubleshooting A Wet System; Troubleshooting A Damaged System - Dell PowerEdge 6850 System Installation Manual
Hide thumbs
Also See for PowerEdge 6850:
- Hardware installation manual (142 pages) ,
- Information update (116 pages) ,
- User manual (29 pages)
Table of Contents
Advertisement
5. Reconnect the system to the electrical outlet, and turn on the system.
6. To replace the optional bezel, hook the right end of the bezel onto the chassis, then fit the free end of the bezel onto the system. Secure the bezel with
the keylock. See Figure 5-2.
Troubleshooting a Wet System
Problem
Liquid spilled on the system.
l
Excessive humidity.
l
Action
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2. Open the system. See
"Opening the
3. Remove all expansion cards installed in the system. See
4. Remove all memory riser cards and memory modules installed in the system. See
5. Remove the processor(s) from the system. See
6. Let the system dry thoroughly for at least 24 hours.
7. Replace the processor(s), memory modules and memory riser cards, and expansion cards. See
and
"Installing an Expansion
8. Close the system. See
"Closing the
9. Reconnect the system to the electrical outlet, and turn on the system and peripherals.
If the system does not start properly, see
10. Run the appropriate online diagnostic test. See
If the tests fail, see
"Getting
Troubleshooting a Damaged System
Problem
System was dropped or damaged.
l
Action
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1. Open the system. See
"Opening the
2. Ensure that the following components are properly installed:
System."
"Removing an Expansion
"Removing a
Processor" in "Installing System Components."
Card" in "Installing System Components."
System."
"Getting
Help."
"Using Server Administrator
Help."
System."
Card" in "Installing System Components."
"Removing Memory
Modules" in "Installing System Components."
"Removing a
Processor,"
Diagnostics" in "Running the System Diagnostics."
"Installing Memory
Modules,"
Advertisement
Table of Contents
Troubleshooting
